From: David Heidelberg via B4 Relay <devnull+david.ixit.cz@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Petr Hodina <petr.hodina@protonmail.com>,
Richard Acayan <mailingradian@gmail.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org,
David Heidelberg <david@ixit.cz>
Subject: [PATCH v9 0/2] Add initial dual front camera and rear flash support for Pixel 3 / 3 XL
Date: Mon, 07 Sep 2026 17:58:08 +0200 [thread overview]
Message-ID: <20260907-pixel3-camera-v9-0-b1981f2d3291@ixit.cz> (raw)
Describe the dual front-facing IMX355 sensors (standard and wide)
and enable the PMI8998 flash LED with hardware-accurate limits.
This brings up the basic camera topology and flash support in DT.
Signed-off-by: David Heidelberg <david@ixit.cz>
---
Changes in v9:
- Dependency merged, no longer depends on anything.
- Link to v8: https://patch.msgid.link/20260901-pixel3-camera-v8-0-99f159883348@ixit.cz
Changes in v8:
- Fix ordering of includes. (Konrad)
- Link to v7: https://lore.kernel.org/r/20260721-pixel3-camera-v7-0-82d323c6c5d2@ixit.cz
Changes in v7:
- Depend on the
https://lore.kernel.org/all/20260628-kbingham-orientation-v3-0-4ed92968aff8@ideasonboard.com/
(Konrad)
- Sort the renamed regulators. Why Mr. Anderson, why. (Konrad)
- Link to v6: https://lore.kernel.org/r/20260720-pixel3-camera-v6-0-afe419bef476@ixit.cz
Changes in v6:
- Remove forgotten bias-pull-down property from cci0_sleep node.
(dtbs_check)
- ..-regulator -> regulator-.. (Konrad)
- Rename camera -pin to -state and remove _pin from the labes. (Konrad,
dtbs_check)
- Link to v5: https://lore.kernel.org/r/20260719-pixel3-camera-v5-0-99593f1bd8ec@ixit.cz
Changes in v5:
- Added function-enumarator to flash LEDs. (Sashiko)
- Dropped l22a regulator needed only for NFOV actuator. (Sashiko)
- Dropped vdda-csi[0-2]-supply, as it was unused. (Sashiko).
- Added previously omited cam_mclk2_sleep sleep state.
- Link to v4: https://lore.kernel.org/r/20260719-pixel3-camera-v4-0-48cab1236852@ixit.cz
Changes in v4:
- Use 24 MHz ext clock for the cameras, as the downstream does, since
the upstream driver can now support it.
- Added additional LED, as the phone contains two separately controlled
white LEDs flash (upper and bottom, in one module).
- Increase flash-max-microamp, as I took wrong "flash" from the
downstream sources and dropped Dmitry R-b.
- Address formatting issues. (Konrad)
- Link to v3: https://lore.kernel.org/r/20260412-pixel3-camera-v3-0-e26b090a6110@ixit.cz
Changes in v3:
- Dropped cam_vio label. (Dmitry)
- Move the MCLK2 pinctrl from cameras to common camss. (Dmitry)
- Link to v2: https://lore.kernel.org/r/20260411-pixel3-camera-v2-0-41b889abb14c@ixit.cz
Changes in v2:
- leds.h include escaped the initial submission. Fixed.
- Link to v1: https://lore.kernel.org/r/20260411-pixel3-camera-v1-0-2757606515b6@ixit.cz
---
David Heidelberg (2):
arm64: dts: qcom: sdm845-google: Add dual front IMX355 cameras
arm64: dts: qcom: sdm845-google: Enable PMI8998 camera flash LEDs
arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 199 ++++++++++++++++++++-
1 file changed, 198 insertions(+), 1 deletion(-)
---
base-commit: 944a035ecca915ae947905dcfb03f2b9dc6d032c
change-id: 20260315-pixel3-camera-a9989bf589ee
Best regards,
--
David Heidelberg <david@ixit.cz>
WARNING: multiple messages have this Message-ID (diff)
From: David Heidelberg <david@ixit.cz>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Petr Hodina <petr.hodina@protonmail.com>,
Richard Acayan <mailingradian@gmail.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org,
David Heidelberg <david@ixit.cz>
Subject: [PATCH v9 0/2] Add initial dual front camera and rear flash support for Pixel 3 / 3 XL
Date: Mon, 07 Sep 2026 17:58:08 +0200 [thread overview]
Message-ID: <20260907-pixel3-camera-v9-0-b1981f2d3291@ixit.cz> (raw)
Describe the dual front-facing IMX355 sensors (standard and wide)
and enable the PMI8998 flash LED with hardware-accurate limits.
This brings up the basic camera topology and flash support in DT.
Signed-off-by: David Heidelberg <david@ixit.cz>
---
Changes in v9:
- Dependency merged, no longer depends on anything.
- Link to v8: https://patch.msgid.link/20260901-pixel3-camera-v8-0-99f159883348@ixit.cz
Changes in v8:
- Fix ordering of includes. (Konrad)
- Link to v7: https://lore.kernel.org/r/20260721-pixel3-camera-v7-0-82d323c6c5d2@ixit.cz
Changes in v7:
- Depend on the
https://lore.kernel.org/all/20260628-kbingham-orientation-v3-0-4ed92968aff8@ideasonboard.com/
(Konrad)
- Sort the renamed regulators. Why Mr. Anderson, why. (Konrad)
- Link to v6: https://lore.kernel.org/r/20260720-pixel3-camera-v6-0-afe419bef476@ixit.cz
Changes in v6:
- Remove forgotten bias-pull-down property from cci0_sleep node.
(dtbs_check)
- ..-regulator -> regulator-.. (Konrad)
- Rename camera -pin to -state and remove _pin from the labes. (Konrad,
dtbs_check)
- Link to v5: https://lore.kernel.org/r/20260719-pixel3-camera-v5-0-99593f1bd8ec@ixit.cz
Changes in v5:
- Added function-enumarator to flash LEDs. (Sashiko)
- Dropped l22a regulator needed only for NFOV actuator. (Sashiko)
- Dropped vdda-csi[0-2]-supply, as it was unused. (Sashiko).
- Added previously omited cam_mclk2_sleep sleep state.
- Link to v4: https://lore.kernel.org/r/20260719-pixel3-camera-v4-0-48cab1236852@ixit.cz
Changes in v4:
- Use 24 MHz ext clock for the cameras, as the downstream does, since
the upstream driver can now support it.
- Added additional LED, as the phone contains two separately controlled
white LEDs flash (upper and bottom, in one module).
- Increase flash-max-microamp, as I took wrong "flash" from the
downstream sources and dropped Dmitry R-b.
- Address formatting issues. (Konrad)
- Link to v3: https://lore.kernel.org/r/20260412-pixel3-camera-v3-0-e26b090a6110@ixit.cz
Changes in v3:
- Dropped cam_vio label. (Dmitry)
- Move the MCLK2 pinctrl from cameras to common camss. (Dmitry)
- Link to v2: https://lore.kernel.org/r/20260411-pixel3-camera-v2-0-41b889abb14c@ixit.cz
Changes in v2:
- leds.h include escaped the initial submission. Fixed.
- Link to v1: https://lore.kernel.org/r/20260411-pixel3-camera-v1-0-2757606515b6@ixit.cz
---
David Heidelberg (2):
arm64: dts: qcom: sdm845-google: Add dual front IMX355 cameras
arm64: dts: qcom: sdm845-google: Enable PMI8998 camera flash LEDs
arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 199 ++++++++++++++++++++-
1 file changed, 198 insertions(+), 1 deletion(-)
---
base-commit: 944a035ecca915ae947905dcfb03f2b9dc6d032c
change-id: 20260315-pixel3-camera-a9989bf589ee
Best regards,
--
David Heidelberg <david@ixit.cz>
next reply other threads:[~2026-09-07 15:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-07 15:58 David Heidelberg via B4 Relay [this message]
2026-09-07 15:58 ` [PATCH v9 0/2] Add initial dual front camera and rear flash support for Pixel 3 / 3 XL David Heidelberg
2026-09-07 15:58 ` [PATCH v9 1/2] arm64: dts: qcom: sdm845-google: Add dual front IMX355 cameras David Heidelberg via B4 Relay
2026-09-07 15:58 ` David Heidelberg
2026-09-07 16:11 ` sashiko-bot
2026-09-08 7:17 ` Abel Vesa
2026-09-09 11:00 ` Konrad Dybcio
2026-09-07 15:58 ` [PATCH v9 2/2] arm64: dts: qcom: sdm845-google: Enable PMI8998 camera flash LEDs David Heidelberg via B4 Relay
2026-09-07 15:58 ` David Heidelberg
2026-09-08 7:16 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260907-pixel3-camera-v9-0-b1981f2d3291@ixit.cz \
--to=devnull+david.ixit.cz@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mailingradian@gmail.com \
--cc=petr.hodina@protonmail.com \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.