[PATCH v5 15/40] scsi: device_handlers: emc: use 16-bits defined sense codes

[Damien Le Moal <dlemoal@kernel.org>]

Refactor the EMC SCSI device handler driver to use the 16-bits sense_code
field of struct scsi_sense_hdr and replace all hard-coded additional sense
codes and additional sense code qualifiers with the enum values defined in
include/scsi/scsi_sense.h. This helps with code clarity as the sense codes
being processed are easier to test and self-documented.

No functional change intended.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
 drivers/scsi/device_handler/scsi_dh_emc.c | 28 ++++++++++++-----------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index ff41b51ef462..4b0ea6045ba3 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -105,10 +105,10 @@ static int trespass_endio(struct scsi_device *sdev,
 	sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
 		    "0x%2x, 0x%2x while sending CLARiiON trespass "
 		    "command.\n", CLARIION_NAME, sshdr->sense_key,
-		    sshdr->asc, sshdr->ascq);
+		    scsi_sense_asc(sshdr), scsi_sense_ascq(sshdr));
 
-	if (sshdr->sense_key == 0x05 && sshdr->asc == 0x04 &&
-	    sshdr->ascq == 0x00) {
+	if (sshdr->sense_key == ILLEGAL_REQUEST &&
+	    sshdr->sense_code == LU_NOT_READY) {
 		/*
 		 * Array based copy in progress -- do not send
 		 * mode_select or copy will be aborted mid-stream.
@@ -117,18 +117,18 @@ static int trespass_endio(struct scsi_device *sdev,
 			    "progress while sending CLARiiON trespass "
 			    "command.\n", CLARIION_NAME);
 		err = SCSI_DH_DEV_TEMP_BUSY;
-	} else if (sshdr->sense_key == 0x02 && sshdr->asc == 0x04 &&
-		   sshdr->ascq == 0x03) {
-		/*
-		 * LUN Not Ready - Manual Intervention Required
-		 * indicates in-progress ucode upgrade (NDU).
-		 */
+	} else if (sshdr->sense_key == NOT_READY &&
+		   sshdr->sense_code ==
+		   LU_NOT_READY_MANUAL_INTERVENTION_REQUIRED) {
+		/* Indicates in-progress ucode upgrade (NDU). */
 		sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
 			    "ucode upgrade NDU operation while sending "
 			    "CLARiiON trespass command.\n", CLARIION_NAME);
 		err = SCSI_DH_DEV_TEMP_BUSY;
-	} else
+	} else {
 		err = SCSI_DH_DEV_FAILED;
+	}
+
 	return err;
 }
 
@@ -288,7 +288,8 @@ static enum scsi_disposition clariion_check_sense(struct scsi_device *sdev,
 {
 	switch (sense_hdr->sense_key) {
 	case NOT_READY:
-		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03)
+		if (sense_hdr->sense_code ==
+		    LU_NOT_READY_MANUAL_INTERVENTION_REQUIRED)
 			/*
 			 * LUN Not Ready - Manual Intervention Required
 			 * indicates this is a passive path.
@@ -305,7 +306,7 @@ static enum scsi_disposition clariion_check_sense(struct scsi_device *sdev,
 			return SUCCESS;
 		break;
 	case ILLEGAL_REQUEST:
-		if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01)
+		if (sense_hdr->sense_code == scsi_sense_code(0x25, 0x01))
 			/*
 			 * An array based copy is in progress. Do not
 			 * fail the path, do not bypass to another PG,
@@ -319,7 +320,8 @@ static enum scsi_disposition clariion_check_sense(struct scsi_device *sdev,
 			return SUCCESS;
 		break;
 	case UNIT_ATTENTION:
-		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
+		if (sense_hdr->sense_code ==
+		    POWER_ON_RESET_OR_BUS_DEVICE_RESET_OCCURRED)
 			/*
 			 * Unit Attention Code. This is the first IO
 			 * to the new path, so just retry.
-- 
2.55.0