From: Zakariya Hadrami via B4 Relay <devnull+zkh.mailbox.org@kernel.org>
To: Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sean Wang <sean.wang@mediatek.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
linux-watchdog@vger.kernel.org, zkh1@proton.me,
Zakariya Hadrami <zkh@mailbox.org>
Subject: [PATCH v4 4/4] ARM: dts: mediatek: Add basic support for Amazon ford board
Date: Wed, 09 Sep 2026 21:38:03 +0200 [thread overview]
Message-ID: <20260909-mt8127-amazon-ford-basic-v4-4-e9af5c420ab1@mailbox.org> (raw)
In-Reply-To: <20260909-mt8127-amazon-ford-basic-v4-0-e9af5c420ab1@mailbox.org>
From: Zakariya Hadrami <zkh@mailbox.org>
This tablet uses a MediaTek MT8127 system-on-chip with 1GB of RAM.
It can currently boot into initramfs with a working UART and
Simple Framebuffer using already initialized panel by the bootloader.
Signed-off-by: Zakariya Hadrami <zkh@mailbox.org>
---
arch/arm/boot/dts/mediatek/Makefile | 1 +
arch/arm/boot/dts/mediatek/mt8127-amazon-ford.dts | 54 +++++++++++++++++++++++
2 files changed, 55 insertions(+)
diff --git a/arch/arm/boot/dts/mediatek/Makefile b/arch/arm/boot/dts/mediatek/Makefile
index 37c4cded0eae..a610bc75c7d9 100644
--- a/arch/arm/boot/dts/mediatek/Makefile
+++ b/arch/arm/boot/dts/mediatek/Makefile
@@ -14,5 +14,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7623n-rfb-emmc.dtb \
mt7623n-bananapi-bpi-r2.dtb \
mt7629-rfb.dtb \
+ mt8127-amazon-ford.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
diff --git a/arch/arm/boot/dts/mediatek/mt8127-amazon-ford.dts b/arch/arm/boot/dts/mediatek/mt8127-amazon-ford.dts
new file mode 100644
index 000000000000..8edad5482de2
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt8127-amazon-ford.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include "mt8127.dtsi"
+
+/ {
+ model = "MediaTek MT8127 Amazon Ford";
+ compatible = "amazon,ford", "mediatek,mt8127";
+ chassis-type = "tablet";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ stdout-path = "serial0:921600n8";
+
+ framebuffer0: framebuffer@b7a00000 {
+ compatible = "simple-framebuffer";
+ memory-region = <&framebuffer_reserved>;
+ width = <1024>;
+ height = <600>;
+ stride = <(1024 * 2)>;
+ format = "r5g6b5";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer_reserved: framebuffer@b7a00000 {
+ reg = <0 0xb7a00000 0 0x1000000>;
+ no-map;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
2.54.0
WARNING: multiple messages have this Message-ID (diff)
From: Zakariya Hadrami <zkh@mailbox.org>
To: Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sean Wang <sean.wang@mediatek.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
linux-watchdog@vger.kernel.org, zkh1@proton.me,
Zakariya Hadrami <zkh@mailbox.org>
Subject: [PATCH v4 4/4] ARM: dts: mediatek: Add basic support for Amazon ford board
Date: Wed, 09 Sep 2026 21:38:03 +0200 [thread overview]
Message-ID: <20260909-mt8127-amazon-ford-basic-v4-4-e9af5c420ab1@mailbox.org> (raw)
In-Reply-To: <20260909-mt8127-amazon-ford-basic-v4-0-e9af5c420ab1@mailbox.org>
This tablet uses a MediaTek MT8127 system-on-chip with 1GB of RAM.
It can currently boot into initramfs with a working UART and
Simple Framebuffer using already initialized panel by the bootloader.
Signed-off-by: Zakariya Hadrami <zkh@mailbox.org>
---
arch/arm/boot/dts/mediatek/Makefile | 1 +
arch/arm/boot/dts/mediatek/mt8127-amazon-ford.dts | 54 +++++++++++++++++++++++
2 files changed, 55 insertions(+)
diff --git a/arch/arm/boot/dts/mediatek/Makefile b/arch/arm/boot/dts/mediatek/Makefile
index 37c4cded0eae..a610bc75c7d9 100644
--- a/arch/arm/boot/dts/mediatek/Makefile
+++ b/arch/arm/boot/dts/mediatek/Makefile
@@ -14,5 +14,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7623n-rfb-emmc.dtb \
mt7623n-bananapi-bpi-r2.dtb \
mt7629-rfb.dtb \
+ mt8127-amazon-ford.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
diff --git a/arch/arm/boot/dts/mediatek/mt8127-amazon-ford.dts b/arch/arm/boot/dts/mediatek/mt8127-amazon-ford.dts
new file mode 100644
index 000000000000..8edad5482de2
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt8127-amazon-ford.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include "mt8127.dtsi"
+
+/ {
+ model = "MediaTek MT8127 Amazon Ford";
+ compatible = "amazon,ford", "mediatek,mt8127";
+ chassis-type = "tablet";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ stdout-path = "serial0:921600n8";
+
+ framebuffer0: framebuffer@b7a00000 {
+ compatible = "simple-framebuffer";
+ memory-region = <&framebuffer_reserved>;
+ width = <1024>;
+ height = <600>;
+ stride = <(1024 * 2)>;
+ format = "r5g6b5";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer_reserved: framebuffer@b7a00000 {
+ reg = <0 0xb7a00000 0 0x1000000>;
+ no-map;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
2.54.0
next prev parent reply other threads:[~2026-09-09 19:38 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-09 19:37 [PATCH v4 0/4] ARM: Basic support for Amazon ford tablet (MT8127) Zakariya Hadrami via B4 Relay
2026-09-09 19:37 ` Zakariya Hadrami
2026-09-09 19:38 ` [PATCH v4 1/4] dt-bindings: watchdog: mediatek: Add MT8127 Zakariya Hadrami via B4 Relay
2026-09-09 19:38 ` Zakariya Hadrami
2026-09-09 20:42 ` Guenter Roeck
2026-09-10 9:30 ` AngeloGioacchino Del Regno
2026-09-09 19:38 ` [PATCH v4 2/4] dt-bindings: arm: mediatek: Add MT8127 Amazon ford Zakariya Hadrami via B4 Relay
2026-09-09 19:38 ` Zakariya Hadrami
2026-09-10 9:30 ` AngeloGioacchino Del Regno
2026-09-10 12:50 ` [v4,2/4] " matthias.bgg
2026-09-09 19:38 ` [PATCH v4 3/4] ARM: dts: mediatek: mt8127: Add watchdog support Zakariya Hadrami via B4 Relay
2026-09-09 19:38 ` Zakariya Hadrami
2026-09-10 9:29 ` AngeloGioacchino Del Regno
2026-09-09 19:38 ` Zakariya Hadrami via B4 Relay [this message]
2026-09-09 19:38 ` [PATCH v4 4/4] ARM: dts: mediatek: Add basic support for Amazon ford board Zakariya Hadrami
2026-09-10 9:29 ` AngeloGioacchino Del Regno
2026-09-10 13:38 ` Zakariya Hadrami
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260909-mt8127-amazon-ford-basic-v4-4-e9af5c420ab1@mailbox.org \
--to=devnull+zkh.mailbox.org@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=wim@linux-watchdog.org \
--cc=zkh1@proton.me \
--cc=zkh@mailbox.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.