* FAILED: patch "[PATCH] scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS" failed to apply to 6.6-stable tree
@ 2026-09-09 11:22 gregkh
2026-09-11 18:21 ` [PATCH 6.6.y 1/3] scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject Sasha Levin
0 siblings, 1 reply; 4+ messages in thread
From: gregkh @ 2026-09-09 11:22 UTC (permalink / raw)
To: njavali, mkp, sashiko-dev; +Cc: stable
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x e46160a5d4fa59bf4d5f3412b6b5cb79edb967dd
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090902-deacon-ambiguity-eafe@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e46160a5d4fa59bf4d5f3412b6b5cb79edb967dd Mon Sep 17 00:00:00 2001
From: Nilesh Javali <njavali@marvell.com>
Date: Thu, 30 Jul 2026 21:28:31 +0530
Subject: [PATCH] scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS
reject error
qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into
fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked
when the NVMe transport calls back to transmit the LS response. On the
error (out:) path the function frees uctx with kfree() but never removes
it from the list. This leaves a freed node in fcport->unsol_ctx_head: the
next list_add_tail() for that fcport writes through the freed node, and a
subsequent list_del() can corrupt the list or panic.
Unlink uctx with list_del() before kfree() on the error path, matching the
other free sites in qla_nvme_release_lsrsp_cmd_kref() and
qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only
returns the SRB to its pool and does not invoke sp->put_fn, so the out:
path is the sole free and uctx is always still linked there.
Fixes: 875386b98857 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-27-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index 28a04e0ff660..36b742f73abf 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -446,6 +446,7 @@ static int qla_nvme_xmt_ls_rsp(struct nvme_fc_local_port *lport,
qla_nvme_ls_reject_iocb(vha, ha->base_qpair, &a, true);
spin_unlock_irqrestore(ha->base_qpair->qp_lock_ptr, flags);
}
+ list_del(&uctx->elem);
kfree(uctx);
return rval;
}
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 6.6.y 1/3] scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject
2026-09-09 11:22 FAILED: patch "[PATCH] scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS" failed to apply to 6.6-stable tree gregkh
@ 2026-09-11 18:21 ` Sasha Levin
2026-09-11 18:21 ` [PATCH 6.6.y 2/3] scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started Sasha Levin
2026-09-11 18:21 ` [PATCH 6.6.y 3/3] scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error Sasha Levin
0 siblings, 2 replies; 4+ messages in thread
From: Sasha Levin @ 2026-09-11 18:21 UTC (permalink / raw)
To: stable
Cc: Nilesh Javali, Hannes Reinecke, Martin K. Petersen (Oracle),
Sasha Levin
From: Nilesh Javali <njavali@marvell.com>
[ Upstream commit f743488e4a203049f27ec5d8cd0caccc483af01e ]
qla_nvme_ls_reject_iocb() allocates from and advances the request ring
through __qla2x00_alloc_iocbs() (which assumes the hardware_lock is
held) and qla2x00_start_iocbs() (which advances the ring and rings the
request-in doorbell), but takes no lock itself. Two of its callers
invoke it without the producer lock held:
- qla_nvme_xmt_ls_rsp(), the NVMe-FC .xmt_ls_rsp transport callback, on
its error path, and
- qla2xxx_process_purls_pkt(), run from the purex work/DPC context.
Both use ha->base_qpair, whose qp_lock_ptr is hardware_lock, so they can
run concurrently with normal I/O submission on the base ring and corrupt
the ring producer state, leading to duplicated or dropped commands. The
third caller, qla2xxx_process_purls_iocb(), runs inside
qla24xx_process_response_queue() with the qpair lock already held and is
safe; that is also why the lock cannot be taken inside the helper itself
(it would recursively re-acquire hardware_lock on the response path).
Take qp_lock_ptr around the two unlocked callers and document the helper
as caller-locked. Both run in process context, so spin_lock_irqsave() is
used and nothing in the locked region sleeps.
Fixes: 875386b98857 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Cc: stable@vger.kernel.org
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260723050413.3897522-53-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Stable-dep-of: e46160a5d4fa ("scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_nvme.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index 38cb3281c6350..cfde62464340b 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -375,6 +375,7 @@ static int qla_nvme_xmt_ls_rsp(struct nvme_fc_local_port *lport,
srb_t *sp;
int rval = QLA_FUNCTION_FAILED;
uint8_t cnt = 0;
+ unsigned long flags;
if (!fcport || fcport->deleted)
goto out;
@@ -441,7 +442,9 @@ static int qla_nvme_xmt_ls_rsp(struct nvme_fc_local_port *lport,
a.vp_idx = vha->vp_idx;
a.nport_handle = uctx->nport_handle;
a.xchg_address = uctx->exchange_address;
+ spin_lock_irqsave(ha->base_qpair->qp_lock_ptr, flags);
qla_nvme_ls_reject_iocb(vha, ha->base_qpair, &a, true);
+ spin_unlock_irqrestore(ha->base_qpair->qp_lock_ptr, flags);
kfree(uctx);
return rval;
}
@@ -1128,6 +1131,10 @@ static void qla_nvme_lsrjt_pt_iocb(struct scsi_qla_host *vha,
lsrjt_iocb->rx_byte_count = 0;
}
+/*
+ * Allocates from and advances the request ring, so the caller must hold
+ * qp->qp_lock_ptr (the response-queue caller already holds it).
+ */
static int
qla_nvme_ls_reject_iocb(struct scsi_qla_host *vha, struct qla_qpair *qp,
struct qla_nvme_lsrjt_pt_arg *a, bool is_xchg_terminate)
@@ -1184,6 +1191,7 @@ qla2xxx_process_purls_pkt(struct scsi_qla_host *vha, struct purex_item *item)
{
struct qla_nvme_unsol_ctx *uctx = item->purls_context;
struct qla_nvme_lsrjt_pt_arg a;
+ unsigned long flags;
int ret = 1;
#if (IS_ENABLED(CONFIG_NVME_FC))
@@ -1196,7 +1204,9 @@ qla2xxx_process_purls_pkt(struct scsi_qla_host *vha, struct purex_item *item)
a.vp_idx = vha->vp_idx;
a.nport_handle = uctx->nport_handle;
a.xchg_address = uctx->exchange_address;
+ spin_lock_irqsave(vha->hw->base_qpair->qp_lock_ptr, flags);
qla_nvme_ls_reject_iocb(vha, vha->hw->base_qpair, &a, true);
+ spin_unlock_irqrestore(vha->hw->base_qpair->qp_lock_ptr, flags);
list_del(&uctx->elem);
kfree(uctx);
}
--
2.53.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 6.6.y 2/3] scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started
2026-09-11 18:21 ` [PATCH 6.6.y 1/3] scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject Sasha Levin
@ 2026-09-11 18:21 ` Sasha Levin
2026-09-11 18:21 ` [PATCH 6.6.y 3/3] scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error Sasha Levin
1 sibling, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2026-09-11 18:21 UTC (permalink / raw)
To: stable; +Cc: Nilesh Javali, Sashiko, Martin K. Petersen (Oracle), Sasha Levin
From: Nilesh Javali <njavali@marvell.com>
[ Upstream commit f7e46ebffc5781aab3f1f5a5d4350addbb5833f4 ]
qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not
started (!ha->flags.fw_started), but the out: path unconditionally calls
qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an
unconditional doorbell write to the request queue in-pointer register.
This rings the firmware doorbell and queues an IOCB that stopped or
resetting firmware cannot consume, and touches MMIO during the reset/EEH
window where fw_started is also clear.
Only emit the LS reject IOCB (and ring the doorbell) when fw_started is
set; otherwise just clean up and return. The post-allocation failure
cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started
and still send the reject. Apply the same guard to the reject emission
in qla2xxx_process_purls_pkt().
Fixes: 875386b98857 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-26-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Stable-dep-of: e46160a5d4fa ("scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_nvme.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index cfde62464340b..4a7cf88d46428 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -442,9 +442,11 @@ static int qla_nvme_xmt_ls_rsp(struct nvme_fc_local_port *lport,
a.vp_idx = vha->vp_idx;
a.nport_handle = uctx->nport_handle;
a.xchg_address = uctx->exchange_address;
- spin_lock_irqsave(ha->base_qpair->qp_lock_ptr, flags);
- qla_nvme_ls_reject_iocb(vha, ha->base_qpair, &a, true);
- spin_unlock_irqrestore(ha->base_qpair->qp_lock_ptr, flags);
+ if (ha->flags.fw_started) {
+ spin_lock_irqsave(ha->base_qpair->qp_lock_ptr, flags);
+ qla_nvme_ls_reject_iocb(vha, ha->base_qpair, &a, true);
+ spin_unlock_irqrestore(ha->base_qpair->qp_lock_ptr, flags);
+ }
kfree(uctx);
return rval;
}
@@ -1204,9 +1206,14 @@ qla2xxx_process_purls_pkt(struct scsi_qla_host *vha, struct purex_item *item)
a.vp_idx = vha->vp_idx;
a.nport_handle = uctx->nport_handle;
a.xchg_address = uctx->exchange_address;
- spin_lock_irqsave(vha->hw->base_qpair->qp_lock_ptr, flags);
- qla_nvme_ls_reject_iocb(vha, vha->hw->base_qpair, &a, true);
- spin_unlock_irqrestore(vha->hw->base_qpair->qp_lock_ptr, flags);
+ if (vha->hw->flags.fw_started) {
+ spin_lock_irqsave(vha->hw->base_qpair->qp_lock_ptr,
+ flags);
+ qla_nvme_ls_reject_iocb(vha, vha->hw->base_qpair, &a,
+ true);
+ spin_unlock_irqrestore(vha->hw->base_qpair->qp_lock_ptr,
+ flags);
+ }
list_del(&uctx->elem);
kfree(uctx);
}
--
2.53.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 6.6.y 3/3] scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error
2026-09-11 18:21 ` [PATCH 6.6.y 1/3] scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject Sasha Levin
2026-09-11 18:21 ` [PATCH 6.6.y 2/3] scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started Sasha Levin
@ 2026-09-11 18:21 ` Sasha Levin
1 sibling, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2026-09-11 18:21 UTC (permalink / raw)
To: stable; +Cc: Nilesh Javali, Sashiko, Martin K. Petersen (Oracle), Sasha Levin
From: Nilesh Javali <njavali@marvell.com>
[ Upstream commit e46160a5d4fa59bf4d5f3412b6b5cb79edb967dd ]
qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into
fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked
when the NVMe transport calls back to transmit the LS response. On the
error (out:) path the function frees uctx with kfree() but never removes
it from the list. This leaves a freed node in fcport->unsol_ctx_head: the
next list_add_tail() for that fcport writes through the freed node, and a
subsequent list_del() can corrupt the list or panic.
Unlink uctx with list_del() before kfree() on the error path, matching the
other free sites in qla_nvme_release_lsrsp_cmd_kref() and
qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only
returns the SRB to its pool and does not invoke sp->put_fn, so the out:
path is the sole free and uctx is always still linked there.
Fixes: 875386b98857 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-27-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_nvme.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index 4a7cf88d46428..8b8c8bfe3c2b5 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -447,6 +447,7 @@ static int qla_nvme_xmt_ls_rsp(struct nvme_fc_local_port *lport,
qla_nvme_ls_reject_iocb(vha, ha->base_qpair, &a, true);
spin_unlock_irqrestore(ha->base_qpair->qp_lock_ptr, flags);
}
+ list_del(&uctx->elem);
kfree(uctx);
return rval;
}
--
2.53.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-09-11 18:21 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-09 11:22 FAILED: patch "[PATCH] scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS" failed to apply to 6.6-stable tree gregkh
2026-09-11 18:21 ` [PATCH 6.6.y 1/3] scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject Sasha Levin
2026-09-11 18:21 ` [PATCH 6.6.y 2/3] scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started Sasha Levin
2026-09-11 18:21 ` [PATCH 6.6.y 3/3] scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error Sasha Levin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.