All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ping-Ke Shih <pkshih@realtek.com>
To: <linux-wireless@vger.kernel.org>
Cc: <dian_syuan0116@realtek.com>, <echuang@realtek.com>,
	<phhuang@realtek.com>, <kevin_yang@realtek.com>
Subject: [PATCH rtw-next 14/15] wifi: rtw89: 8852b: update default value for ANA SWR
Date: Wed, 9 Sep 2026 15:00:03 +0800	[thread overview]
Message-ID: <20260909070004.35353-15-pkshih@realtek.com> (raw)
In-Reply-To: <20260909070004.35353-1-pkshih@realtek.com>

The RTL8852BE randomly card drops on certain platforms. Adjust ANA_SWR
behavior by compensation parameters to stabilize the switching regulator
output to prevent unwanted drop.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/reg.h      | 2 +-
 drivers/net/wireless/realtek/rtw89/rtw8852b.c | 5 +----
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw89/reg.h b/drivers/net/wireless/realtek/rtw89/reg.h
index e85af8713777..11b30be8f880 100644
--- a/drivers/net/wireless/realtek/rtw89/reg.h
+++ b/drivers/net/wireless/realtek/rtw89/reg.h
@@ -265,7 +265,7 @@
 #define R_AX_SPSANA_ON_CTRL1 0x0224
 
 #define R_AX_SPS_ANA_ON_CTRL2 0x0228
-#define RTL8852B_RFE_05_SPS_ANA 0x4A82
+#define RTL8852B_DEFAULT_SPS_ANA 0x4F42
 
 #define R_AX_WLAN_XTAL_SI_CTRL 0x0270
 #define B_AX_WL_XTAL_SI_CMD_POLL BIT(31)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852b.c b/drivers/net/wireless/realtek/rtw89/rtw8852b.c
index 356623341f65..c3c53a6b8119 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852b.c
@@ -355,10 +355,7 @@ static const u8 rtw89_btc_8852b_bt_rssi_thres[BTC_BT_RSSI_THMAX] = {50, 40, 30,
 
 static void rtw8852b_pwr_sps_ana(struct rtw89_dev *rtwdev)
 {
-	struct rtw89_efuse *efuse = &rtwdev->efuse;
-
-	if (efuse->rfe_type == 0x5)
-		rtw89_write16(rtwdev, R_AX_SPS_ANA_ON_CTRL2, RTL8852B_RFE_05_SPS_ANA);
+	rtw89_write16(rtwdev, R_AX_SPS_ANA_ON_CTRL2, RTL8852B_DEFAULT_SPS_ANA);
 }
 
 static void rtw8852b_pwr_sps_dig_off(struct rtw89_dev *rtwdev)
-- 
2.25.1


  parent reply	other threads:[~2026-09-09  7:02 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-09  6:59 [PATCH rtw-next 00/15] wifi: rtw89: correct MLO behavior, fix Coverity issues, and update hardware settings Ping-Ke Shih
2026-09-09  6:59 ` [PATCH rtw-next 01/15] wifi: rtw89: consider sta maximum AMSDU subframes number to decide TX work waiting Ping-Ke Shih
2026-09-09  6:59 ` [PATCH rtw-next 02/15] wifi: rtw89: mlo: update link id to FW upon connection Ping-Ke Shih
2026-09-09  6:59 ` [PATCH rtw-next 03/15] Revert "wifi: rtw89: fix unable to receive probe responses under MLO connection" Ping-Ke Shih
2026-09-09  6:59 ` [PATCH rtw-next 04/15] wifi: rtw89: modify active scan rule for 6GHz band Ping-Ke Shih
2026-09-09  6:59 ` [PATCH rtw-next 05/15] wifi: rtw89: fix ctrl_sco_cck for Wi-Fi 7 Ping-Ke Shih
2026-09-09  6:59 ` [PATCH rtw-next 06/15] wifi: rtw89: 8852a: prevent potential OOB in ctrl_sco_cck Ping-Ke Shih
2026-09-09  6:59 ` [PATCH rtw-next 07/15] wifi: rtw89: fw: cmd_ofld_flush always reset counter Ping-Ke Shih
2026-09-09  6:59 ` [PATCH rtw-next 08/15] wifi: rtw89: explicitly declare TX queue flags by DECLARE_BITMAP() Ping-Ke Shih
2026-09-09  6:59 ` [PATCH rtw-next 09/15] wifi: rtw89: 8922d: add extra data to PS H2C Ping-Ke Shih
2026-09-09  6:59 ` [PATCH rtw-next 10/15] wifi: rtw89: mac: change beamformee CSI direct forward to CMAC_TXDMA Ping-Ke Shih
2026-09-09  7:00 ` [PATCH rtw-next 11/15] wifi: rtw89: fw: extend ch_info format of hw_scan to v2 Ping-Ke Shih
2026-09-09  7:00 ` [PATCH rtw-next 12/15] wifi: rtw89: 8922d: update BA cam format to G7 Ping-Ke Shih
2026-09-09  7:00 ` [PATCH rtw-next 13/15] wifi: rtw89: 8851b: rfk: set DCK start and delay time Ping-Ke Shih
2026-09-09  7:00 ` Ping-Ke Shih [this message]
2026-09-09  7:00 ` [PATCH rtw-next 15/15] wifi: rtw89: phy: correct PHY-1 EDCCA report register access Ping-Ke Shih

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260909070004.35353-15-pkshih@realtek.com \
    --to=pkshih@realtek.com \
    --cc=dian_syuan0116@realtek.com \
    --cc=echuang@realtek.com \
    --cc=kevin_yang@realtek.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=phhuang@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.