* [PATCH 5.15.y 1/2] media: i2c: imx355: Replace client->dev usage
2026-09-09 10:46 FAILED: patch "[PATCH] media: imx355: Avoid calling imx355_power_off twice in error" failed to apply to 5.15-stable tree gregkh
@ 2026-09-11 14:13 ` Sasha Levin
2026-09-11 14:13 ` [PATCH 5.15.y 2/2] media: imx355: Avoid calling imx355_power_off twice in error path Sasha Levin
0 siblings, 1 reply; 3+ messages in thread
From: Sasha Levin @ 2026-09-11 14:13 UTC (permalink / raw)
To: stable
Cc: Laurent Pinchart, Sakari Ailus, Mehdi Djait, Hans Verkuil,
Sasha Levin
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[ Upstream commit 49c6ac166cf77cd53eeda69e8ccdcbe4a57a4fdf ]
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct imx355 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
For the 6.6 backport, retain <asm/unaligned.h>: this tree does not have
<linux/unaligned.h>. Drop the firmware-property parsing hunk and its
properties declaration, since the corresponding control support is absent
from this driver. Remove the now-unused client local in control setup.
Also convert the two link-frequency diagnostics retained in this tree.
Keep the device pointer initialized immediately after allocation and
convert the runtime-PM calls, providing the context needed to apply
commit ee737bc3ccae7dc713ccaa83ffa46080c6031b3e unchanged. Preserve the
existing streaming and system-sleep handling; no functions are added.
Stable-dep-of: ee737bc3ccae ("media: imx355: Avoid calling imx355_power_off twice in error path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/imx355.c | 60 ++++++++++++++++++--------------------
1 file changed, 29 insertions(+), 31 deletions(-)
diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c
index f49fc5663d221..d5c3232e3ee7e 100644
--- a/drivers/media/i2c/imx355.c
+++ b/drivers/media/i2c/imx355.c
@@ -98,6 +98,8 @@ struct imx355_hwcfg {
};
struct imx355 {
+ struct device *dev;
+
struct v4l2_subdev sd;
struct media_pad pad;
@@ -1138,14 +1140,13 @@ static int imx355_write_reg(struct imx355 *imx355, u16 reg, u32 len, u32 val)
static int imx355_write_regs(struct imx355 *imx355,
const struct imx355_reg *regs, u32 len)
{
- struct i2c_client *client = v4l2_get_subdevdata(&imx355->sd);
int ret;
u32 i;
for (i = 0; i < len; i++) {
ret = imx355_write_reg(imx355, regs[i].address, 1, regs[i].val);
if (ret) {
- dev_err_ratelimited(&client->dev,
+ dev_err_ratelimited(imx355->dev,
"write reg 0x%4.4x return err %d",
regs[i].address, ret);
@@ -1180,7 +1181,6 @@ static int imx355_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct imx355 *imx355 = container_of(ctrl->handler,
struct imx355, ctrl_handler);
- struct i2c_client *client = v4l2_get_subdevdata(&imx355->sd);
s64 max;
int ret;
@@ -1199,7 +1199,7 @@ static int imx355_set_ctrl(struct v4l2_ctrl *ctrl)
* Applying V4L2 control value only happens
* when power is up for streaming
*/
- if (!pm_runtime_get_if_in_use(&client->dev))
+ if (!pm_runtime_get_if_in_use(imx355->dev))
return 0;
switch (ctrl->id) {
@@ -1233,12 +1233,12 @@ static int imx355_set_ctrl(struct v4l2_ctrl *ctrl)
break;
default:
ret = -EINVAL;
- dev_info(&client->dev, "ctrl(id:0x%x,val:0x%x) is not handled",
+ dev_info(imx355->dev, "ctrl(id:0x%x,val:0x%x) is not handled",
ctrl->id, ctrl->val);
break;
}
- pm_runtime_put(&client->dev);
+ pm_runtime_put(imx355->dev);
return ret;
}
@@ -1388,7 +1388,6 @@ imx355_set_pad_format(struct v4l2_subdev *sd,
/* Start streaming */
static int imx355_start_streaming(struct imx355 *imx355)
{
- struct i2c_client *client = v4l2_get_subdevdata(&imx355->sd);
const struct imx355_reg_list *reg_list;
int ret;
@@ -1396,7 +1395,7 @@ static int imx355_start_streaming(struct imx355 *imx355)
reg_list = &imx355_global_setting;
ret = imx355_write_regs(imx355, reg_list->regs, reg_list->num_of_regs);
if (ret) {
- dev_err(&client->dev, "failed to set global settings");
+ dev_err(imx355->dev, "failed to set global settings");
return ret;
}
@@ -1404,7 +1403,7 @@ static int imx355_start_streaming(struct imx355 *imx355)
reg_list = &imx355->cur_mode->reg_list;
ret = imx355_write_regs(imx355, reg_list->regs, reg_list->num_of_regs);
if (ret) {
- dev_err(&client->dev, "failed to set mode");
+ dev_err(imx355->dev, "failed to set mode");
return ret;
}
@@ -1432,7 +1431,6 @@ static int imx355_stop_streaming(struct imx355 *imx355)
static int imx355_set_stream(struct v4l2_subdev *sd, int enable)
{
struct imx355 *imx355 = to_imx355(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret = 0;
mutex_lock(&imx355->mutex);
@@ -1442,7 +1440,7 @@ static int imx355_set_stream(struct v4l2_subdev *sd, int enable)
}
if (enable) {
- ret = pm_runtime_resume_and_get(&client->dev);
+ ret = pm_runtime_resume_and_get(imx355->dev);
if (ret < 0)
goto err_unlock;
@@ -1455,7 +1453,7 @@ static int imx355_set_stream(struct v4l2_subdev *sd, int enable)
goto err_rpm_put;
} else {
imx355_stop_streaming(imx355);
- pm_runtime_put(&client->dev);
+ pm_runtime_put(imx355->dev);
}
imx355->streaming = enable;
@@ -1469,7 +1467,7 @@ static int imx355_set_stream(struct v4l2_subdev *sd, int enable)
return ret;
err_rpm_put:
- pm_runtime_put(&client->dev);
+ pm_runtime_put(imx355->dev);
err_unlock:
mutex_unlock(&imx355->mutex);
@@ -1510,7 +1508,6 @@ static int __maybe_unused imx355_resume(struct device *dev)
/* Verify chip ID */
static int imx355_identify_module(struct imx355 *imx355)
{
- struct i2c_client *client = v4l2_get_subdevdata(&imx355->sd);
int ret;
u32 val;
@@ -1519,7 +1516,7 @@ static int imx355_identify_module(struct imx355 *imx355)
return ret;
if (val != IMX355_CHIP_ID) {
- dev_err(&client->dev, "chip id mismatch: %x!=%x",
+ dev_err(imx355->dev, "chip id mismatch: %x!=%x",
IMX355_CHIP_ID, val);
return -EIO;
}
@@ -1559,7 +1556,6 @@ static const struct v4l2_subdev_internal_ops imx355_internal_ops = {
/* Initialize control handlers */
static int imx355_init_controls(struct imx355 *imx355)
{
- struct i2c_client *client = v4l2_get_subdevdata(&imx355->sd);
struct v4l2_ctrl_handler *ctrl_hdlr;
s64 exposure_max;
s64 vblank_def;
@@ -1635,7 +1631,7 @@ static int imx355_init_controls(struct imx355 *imx355)
0, 0, imx355_test_pattern_menu);
if (ctrl_hdlr->error) {
ret = ctrl_hdlr->error;
- dev_err(&client->dev, "control init failed: %d", ret);
+ dev_err(imx355->dev, "control init failed: %d", ret);
goto error;
}
@@ -1727,6 +1723,8 @@ static int imx355_probe(struct i2c_client *client)
if (!imx355)
return -ENOMEM;
+ imx355->dev = &client->dev;
+
mutex_init(&imx355->mutex);
/* Initialize subdev */
@@ -1735,13 +1733,13 @@ static int imx355_probe(struct i2c_client *client)
/* Check module identity */
ret = imx355_identify_module(imx355);
if (ret) {
- dev_err(&client->dev, "failed to find sensor: %d", ret);
+ dev_err(imx355->dev, "failed to find sensor: %d", ret);
goto error_probe;
}
- imx355->hwcfg = imx355_get_hwcfg(&client->dev);
+ imx355->hwcfg = imx355_get_hwcfg(imx355->dev);
if (!imx355->hwcfg) {
- dev_err(&client->dev, "failed to get hwcfg");
+ dev_err(imx355->dev, "failed to get hwcfg");
ret = -ENODEV;
goto error_probe;
}
@@ -1749,13 +1747,13 @@ static int imx355_probe(struct i2c_client *client)
imx355->link_def_freq = link_freq_menu_items[IMX355_LINK_FREQ_INDEX];
for (i = 0; i < imx355->hwcfg->nr_of_link_freqs; i++) {
if (imx355->hwcfg->link_freqs[i] == imx355->link_def_freq) {
- dev_dbg(&client->dev, "link freq index %d matched", i);
+ dev_dbg(imx355->dev, "link freq index %d matched", i);
break;
}
}
if (i == imx355->hwcfg->nr_of_link_freqs) {
- dev_err(&client->dev, "no link frequency supported");
+ dev_err(imx355->dev, "no link frequency supported");
ret = -EINVAL;
goto error_probe;
}
@@ -1765,7 +1763,7 @@ static int imx355_probe(struct i2c_client *client)
ret = imx355_init_controls(imx355);
if (ret) {
- dev_err(&client->dev, "failed to init controls: %d", ret);
+ dev_err(imx355->dev, "failed to init controls: %d", ret);
goto error_probe;
}
@@ -1780,7 +1778,7 @@ static int imx355_probe(struct i2c_client *client)
imx355->pad.flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&imx355->sd.entity, 1, &imx355->pad);
if (ret) {
- dev_err(&client->dev, "failed to init entity pads: %d", ret);
+ dev_err(imx355->dev, "failed to init entity pads: %d", ret);
goto error_handler_free;
}
@@ -1788,9 +1786,9 @@ static int imx355_probe(struct i2c_client *client)
* Device is already turned on by i2c-core with ACPI domain PM.
* Enable runtime PM and turn off the device.
*/
- pm_runtime_set_active(&client->dev);
- pm_runtime_enable(&client->dev);
- pm_runtime_idle(&client->dev);
+ pm_runtime_set_active(imx355->dev);
+ pm_runtime_enable(imx355->dev);
+ pm_runtime_idle(imx355->dev);
ret = v4l2_async_register_subdev_sensor(&imx355->sd);
if (ret < 0)
@@ -1799,8 +1797,8 @@ static int imx355_probe(struct i2c_client *client)
return 0;
error_media_entity_runtime_pm:
- pm_runtime_disable(&client->dev);
- pm_runtime_set_suspended(&client->dev);
+ pm_runtime_disable(imx355->dev);
+ pm_runtime_set_suspended(imx355->dev);
media_entity_cleanup(&imx355->sd.entity);
error_handler_free:
@@ -1821,8 +1819,8 @@ static int imx355_remove(struct i2c_client *client)
media_entity_cleanup(&sd->entity);
v4l2_ctrl_handler_free(sd->ctrl_handler);
- pm_runtime_disable(&client->dev);
- pm_runtime_set_suspended(&client->dev);
+ pm_runtime_disable(imx355->dev);
+ pm_runtime_set_suspended(imx355->dev);
mutex_destroy(&imx355->mutex);
--
2.53.0
^ permalink raw reply related [flat|nested] 3+ messages in thread