All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleg Keri <okerixx@gmail.com>
To: Vinod Koul <vkoul@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Bjorn Andersson <quic_bjorande@quicinc.com>,
	Johan Hovold <johan+linaro@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Michael Scott <mike.scott@oss.qualcomm.com>
Subject: [PATCH 2/2] phy: qcom: qmp-combo: check qmp_combo_com_init() in the typec callbacks
Date: Wed,  9 Sep 2026 17:14:43 +0200	[thread overview]
Message-ID: <20260909151443.10276-3-okerixx@gmail.com> (raw)
In-Reply-To: <20260909151443.10276-1-okerixx@gmail.com>

qmp_combo_typec_switch_set() and qmp_combo_typec_mux_set() tear the common
block down and bring it straight back up on an orientation or altmode
change, but they discard the result of the bringup:

	qmp_combo_com_exit(qmp, true);

	qmp_combo_com_init(qmp, true);
	if (qmp->usb_init_count)
		qmp_combo_usb_power_on(qmp->usb_phy);

If qmp_combo_com_init() fails - a regulator, a reset or
clk_bulk_prepare_enable() - it unwinds what it had brought up and returns
an error, leaving the clocks disabled.  Both callbacks then carry on and
qmp_combo_usb_power_on(), and dp_aux_init() after it, write PHY registers
with no clock running.

Propagate the failure instead.

Fixes: 2851117f8f42 ("phy: qcom-qmp-combo: Introduce orientation switching")
Signed-off-by: Oleg Keri <okerixx@gmail.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 7d740ed0ce16..44b6f29926dc 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -4924,6 +4924,7 @@ static int qmp_combo_typec_switch_set(struct typec_switch_dev *sw,
 {
 	struct qmp_combo *qmp = typec_switch_get_drvdata(sw);
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	int ret = 0;
 
 	if (orientation == qmp->orientation || orientation == TYPEC_ORIENTATION_NONE)
 		return 0;
@@ -4938,15 +4939,19 @@ static int qmp_combo_typec_switch_set(struct typec_switch_dev *sw,
 			qmp_combo_usb_power_off(qmp->usb_phy);
 		qmp_combo_com_exit(qmp, true);
 
-		qmp_combo_com_init(qmp, true);
+		ret = qmp_combo_com_init(qmp, true);
+		if (ret)
+			goto out;
+
 		if (qmp->usb_init_count)
 			qmp_combo_usb_power_on(qmp->usb_phy);
 		if (qmp->dp_init_count)
 			cfg->dp_aux_init(qmp);
 	}
+out:
 	mutex_unlock(&qmp->phy_mutex);
 
-	return 0;
+	return ret;
 }
 
 static int qmp_combo_typec_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
@@ -4955,6 +4960,7 @@ static int qmp_combo_typec_mux_set(struct typec_mux_dev *mux, struct typec_mux_s
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	enum qmpphy_mode new_mode;
 	unsigned int svid;
+	int ret;
 
 	guard(mutex)(&qmp->phy_mutex);
 
@@ -5012,7 +5018,9 @@ static int qmp_combo_typec_mux_set(struct typec_mux_dev *mux, struct typec_mux_s
 		qmp_combo_com_exit(qmp, true);
 
 		/* Now everything's powered down, power up the right PHYs */
-		qmp_combo_com_init(qmp, true);
+		ret = qmp_combo_com_init(qmp, true);
+		if (ret)
+			return ret;
 
 		if (new_mode == QMPPHY_MODE_DP_ONLY) {
 			if (qmp->usb_init_count)
-- 
2.55.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2026-09-09 15:15 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-09 15:14 [PATCH 0/2] phy: qcom: qmp-combo: fix forced com_init() error handling Oleg Keri
2026-09-09 15:14 ` [PATCH 1/2] phy: qcom: qmp-combo: do not decrement init_count on a forced init failure Oleg Keri
2026-09-09 15:28   ` sashiko-bot
2026-09-09 15:38     ` Oleg Keri
2026-09-09 15:14 ` Oleg Keri [this message]
2026-09-09 15:25   ` [PATCH 2/2] phy: qcom: qmp-combo: check qmp_combo_com_init() in the typec callbacks sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260909151443.10276-3-okerixx@gmail.com \
    --to=okerixx@gmail.com \
    --cc=johan+linaro@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=mani@kernel.org \
    --cc=mike.scott@oss.qualcomm.com \
    --cc=neil.armstrong@linaro.org \
    --cc=quic_bjorande@quicinc.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.