* [PATCH 1/1] doc: board/qualcomm: Fix kconfig formatting
@ 2026-09-09 18:32 Petr Vorel
2026-09-10 4:10 ` Balaji Selvanathan
2026-09-10 13:13 ` Casey Connolly
0 siblings, 2 replies; 3+ messages in thread
From: Petr Vorel @ 2026-09-09 18:32 UTC (permalink / raw)
To: u-boot-qcom
Cc: Petr Vorel, Casey Connolly, Neil Armstrong, Sumit Garg, Tom Rini,
u-boot
Fixes: d9252fcde12 ("doc: board/qualcomm: document generic targets")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
---
doc/board/qualcomm/debugging.rst | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/doc/board/qualcomm/debugging.rst b/doc/board/qualcomm/debugging.rst
index 42821f6546c..fb6b0d397e4 100644
--- a/doc/board/qualcomm/debugging.rst
+++ b/doc/board/qualcomm/debugging.rst
@@ -18,6 +18,8 @@ Newer boards (SDM845 and newer, those with GENI SE UART)
Open ``configs/qcom_defconfig`` and add the following snippet to the bottom:
+.. code-block:: kconfig
+
CONFIG_BAUDRATE=115200
# Uncomment to enable UART pre-relocation
@@ -42,6 +44,8 @@ Older boards (db410c and db820c)
Open ``configs/dragonboard<BOARD>_defconfig``
+.. code-block:: kconfig
+
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ANNOUNCE=y
# db410c - 0x78b0000
@@ -56,4 +60,3 @@ Open ``configs/dragonboard<BOARD>_defconfig``
CONFIG_LOG_MAX_LEVEL=9
CONFIG_LOG_DEFAULT_LEVEL=9
CONFIG_LOGLEVEL=9
-
--
2.53.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH 1/1] doc: board/qualcomm: Fix kconfig formatting
2026-09-09 18:32 [PATCH 1/1] doc: board/qualcomm: Fix kconfig formatting Petr Vorel
@ 2026-09-10 4:10 ` Balaji Selvanathan
2026-09-10 13:13 ` Casey Connolly
1 sibling, 0 replies; 3+ messages in thread
From: Balaji Selvanathan @ 2026-09-10 4:10 UTC (permalink / raw)
To: Petr Vorel, u-boot-qcom
Cc: Casey Connolly, Neil Armstrong, Sumit Garg, Tom Rini, u-boot
Hi Petr,
Thanks for correcting this.
On 9/10/2026 12:02 AM, Petr Vorel wrote:
> Fixes: d9252fcde12 ("doc: board/qualcomm: document generic targets")
> Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>
> ---
> doc/board/qualcomm/debugging.rst | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/doc/board/qualcomm/debugging.rst b/doc/board/qualcomm/debugging.rst
> index 42821f6546c..fb6b0d397e4 100644
> --- a/doc/board/qualcomm/debugging.rst
> +++ b/doc/board/qualcomm/debugging.rst
> @@ -18,6 +18,8 @@ Newer boards (SDM845 and newer, those with GENI SE UART)
>
> Open ``configs/qcom_defconfig`` and add the following snippet to the bottom:
>
> +.. code-block:: kconfig
> +
> CONFIG_BAUDRATE=115200
>
> # Uncomment to enable UART pre-relocation
> @@ -42,6 +44,8 @@ Older boards (db410c and db820c)
>
> Open ``configs/dragonboard<BOARD>_defconfig``
>
> +.. code-block:: kconfig
> +
> CONFIG_DEBUG_UART=y
> CONFIG_DEBUG_UART_ANNOUNCE=y
> # db410c - 0x78b0000
> @@ -56,4 +60,3 @@ Open ``configs/dragonboard<BOARD>_defconfig``
> CONFIG_LOG_MAX_LEVEL=9
> CONFIG_LOG_DEFAULT_LEVEL=9
> CONFIG_LOGLEVEL=9
> -
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH 1/1] doc: board/qualcomm: Fix kconfig formatting
2026-09-09 18:32 [PATCH 1/1] doc: board/qualcomm: Fix kconfig formatting Petr Vorel
2026-09-10 4:10 ` Balaji Selvanathan
@ 2026-09-10 13:13 ` Casey Connolly
1 sibling, 0 replies; 3+ messages in thread
From: Casey Connolly @ 2026-09-10 13:13 UTC (permalink / raw)
To: Petr Vorel, u-boot-qcom; +Cc: Neil Armstrong, Sumit Garg, Tom Rini, u-boot
Hi Petr,
Thanks for this!
On 9/9/26 20:32, Petr Vorel wrote:
> Fixes: d9252fcde12 ("doc: board/qualcomm: document generic targets")
> Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
> ---
> doc/board/qualcomm/debugging.rst | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/doc/board/qualcomm/debugging.rst b/doc/board/qualcomm/debugging.rst
> index 42821f6546c..fb6b0d397e4 100644
> --- a/doc/board/qualcomm/debugging.rst
> +++ b/doc/board/qualcomm/debugging.rst
> @@ -18,6 +18,8 @@ Newer boards (SDM845 and newer, those with GENI SE UART)
>
> Open ``configs/qcom_defconfig`` and add the following snippet to the bottom:
>
> +.. code-block:: kconfig
> +
> CONFIG_BAUDRATE=115200
>
> # Uncomment to enable UART pre-relocation
> @@ -42,6 +44,8 @@ Older boards (db410c and db820c)
>
> Open ``configs/dragonboard<BOARD>_defconfig``
>
> +.. code-block:: kconfig
> +
> CONFIG_DEBUG_UART=y
> CONFIG_DEBUG_UART_ANNOUNCE=y
> # db410c - 0x78b0000
> @@ -56,4 +60,3 @@ Open ``configs/dragonboard<BOARD>_defconfig``
> CONFIG_LOG_MAX_LEVEL=9
> CONFIG_LOG_DEFAULT_LEVEL=9
> CONFIG_LOGLEVEL=9
> -
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-09-10 13:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-09 18:32 [PATCH 1/1] doc: board/qualcomm: Fix kconfig formatting Petr Vorel
2026-09-10 4:10 ` Balaji Selvanathan
2026-09-10 13:13 ` Casey Connolly
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.