From: David Yang <mmyangfl@gmail.com>
To: netdev@vger.kernel.org
Cc: David Yang <mmyangfl@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next 2/7] net: dsa: motorcomm: Check port type with runtime info
Date: Thu, 10 Sep 2026 03:05:30 +0800 [thread overview]
Message-ID: <20260909190541.466476-3-mmyangfl@gmail.com> (raw)
In-Reply-To: <20260909190541.466476-1-mmyangfl@gmail.com>
The yt921x_port_is_internal/external() macros hardcoded the port layout:
they treat ports 8 and 9 as external on every chip and count the dummy
ports as internal. Drop them and identify the port type using chip info
and runtime configuration.
Signed-off-by: David Yang <mmyangfl@gmail.com>
---
drivers/net/dsa/motorcomm/chip.c | 36 ++++++++++++++++++++++----------
drivers/net/dsa/motorcomm/chip.h | 11 +++++-----
2 files changed, 31 insertions(+), 16 deletions(-)
diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index 64fdc5109cc6..946949a3aba8 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -3743,6 +3743,7 @@ yt921x_dsa_port_set_apptrust(struct dsa_switch *ds, int port, const u8 *sel,
static int yt921x_port_down(struct yt921x_priv *priv, int port)
{
+ const struct yt921x_info *info = priv->info;
u32 mask;
int res;
@@ -3751,12 +3752,13 @@ static int yt921x_port_down(struct yt921x_priv *priv, int port)
if (res)
return res;
- if (yt921x_port_is_external(port)) {
+ if (BIT(port) & info->serdes_mask) {
mask = YT921X_SERDES_LINK;
res = yt921x_reg_clear_bits(priv, YT921X_SERDESn(port), mask);
if (res)
return res;
-
+ }
+ if (BIT(port) & info->xmii_mask) {
mask = YT921X_XMII_LINK;
res = yt921x_reg_clear_bits(priv, YT921X_XMIIn(port), mask);
if (res)
@@ -3771,6 +3773,8 @@ yt921x_port_up(struct yt921x_priv *priv, int port, unsigned int mode,
phy_interface_t interface, int speed, int duplex,
bool tx_pause, bool rx_pause)
{
+ const struct yt921x_info *info = priv->info;
+ struct yt921x_port *pp = &priv->ports[port];
u32 mask;
u32 ctrl;
int res;
@@ -3805,7 +3809,10 @@ yt921x_port_up(struct yt921x_priv *priv, int port, unsigned int mode,
if (res)
return res;
- if (yt921x_port_is_external(port)) {
+ if (!(BIT(port) & (info->serdes_mask | info->xmii_mask)))
+ return 0;
+
+ if (pp->serdes) {
mask = YT921X_SERDES_SPEED_M;
switch (speed) {
case SPEED_10:
@@ -3841,7 +3848,7 @@ yt921x_port_up(struct yt921x_priv *priv, int port, unsigned int mode,
mask, ctrl);
if (res)
return res;
-
+ } else {
mask = YT921X_XMII_LINK;
res = yt921x_reg_set_bits(priv, YT921X_XMIIn(port), mask);
if (res)
@@ -3881,17 +3888,16 @@ static int
yt921x_port_config(struct yt921x_priv *priv, int port, unsigned int mode,
phy_interface_t interface)
{
+ const struct yt921x_info *info = priv->info;
+ struct yt921x_port *pp = &priv->ports[port];
struct device *dev = to_device(priv);
u32 mask;
u32 ctrl;
int res;
- if (!yt921x_port_is_external(port)) {
- if (interface != PHY_INTERFACE_MODE_INTERNAL) {
- dev_err(dev, "Wrong mode %d on port %d\n",
- interface, port);
- return -EINVAL;
- }
+ if (BIT(port) & info->internal_mask) {
+ if (interface != PHY_INTERFACE_MODE_INTERNAL)
+ goto err;
return 0;
}
@@ -3901,6 +3907,9 @@ yt921x_port_config(struct yt921x_priv *priv, int port, unsigned int mode,
case PHY_INTERFACE_MODE_100BASEX:
case PHY_INTERFACE_MODE_1000BASEX:
case PHY_INTERFACE_MODE_2500BASEX:
+ if (!(BIT(port) & info->serdes_mask))
+ goto err;
+
mask = YT921X_SERDES_CTRL_PORTn(port);
res = yt921x_reg_set_bits(priv, YT921X_SERDES_CTRL, mask);
if (res)
@@ -3933,13 +3942,18 @@ yt921x_port_config(struct yt921x_priv *priv, int port, unsigned int mode,
if (res)
return res;
+ pp->serdes = true;
break;
/* add XMII support here */
default:
- return -EINVAL;
+ goto err;
}
return 0;
+
+err:
+ dev_err(dev, "Wrong mode %d on port %d\n", interface, port);
+ return -EINVAL;
}
static void
diff --git a/drivers/net/dsa/motorcomm/chip.h b/drivers/net/dsa/motorcomm/chip.h
index bc2641ded101..6f0123d219e0 100644
--- a/drivers/net/dsa/motorcomm/chip.h
+++ b/drivers/net/dsa/motorcomm/chip.h
@@ -858,9 +858,6 @@ enum yt921x_fdb_entry_status {
#define YT921X_NAME "yt921x"
-#define yt921x_port_is_internal(port) ((port) < 8)
-#define yt921x_port_is_external(port) ((port) == 8 || (port) == 9)
-
struct yt921x_mib {
u64 rx_broadcast;
u64 rx_pause;
@@ -936,8 +933,12 @@ struct yt921x_acl_blk {
struct yt921x_port {
unsigned char index;
- bool hairpin;
- bool isolated;
+ /* SerDes in use */
+ bool serdes:1;
+ /* BR_HAIRPIN_MODE */
+ bool hairpin:1;
+ /* BR_ISOLATED */
+ bool isolated:1;
struct delayed_work mib_read;
struct yt921x_mib mib;
--
2.53.0
next prev parent reply other threads:[~2026-09-09 19:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-09 19:05 [PATCH net-next 0/7] net: dsa: motorcomm: Add SerDes PCS David Yang
2026-09-09 19:05 ` [PATCH net-next 1/7] net: dsa: motorcomm: Split xMII and SERDES port masks David Yang
2026-09-10 20:59 ` Andrew Lunn
2026-09-10 21:37 ` David Yang
2026-09-11 11:46 ` Andrew Lunn
2026-09-11 12:32 ` David Yang
2026-09-09 19:05 ` David Yang [this message]
2026-09-09 19:05 ` [PATCH net-next 3/7] net: dsa: motorcomm: Fix port control/status register bit field names David Yang
2026-09-09 19:05 ` [PATCH net-next 4/7] net: dsa: motorcomm: Introduce yt921x_speed David Yang
2026-09-09 19:05 ` [PATCH net-next 5/7] net: dsa: motorcomm: Hoist port_to_priv helper into chip.h David Yang
2026-09-09 19:05 ` [PATCH net-next 6/7] net: dsa: motorcomm: Split MDIO bus module David Yang
2026-09-09 19:05 ` [PATCH net-next 7/7] net: dsa: motorcomm: Add SerDes PCS David Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260909190541.466476-3-mmyangfl@gmail.com \
--to=mmyangfl@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.