FAILED: patch "[PATCH] nvme: skip the zoned limits update if the zone info query" failed to apply to 6.18-stable tree

FAILED: patch "[PATCH] nvme: skip the zoned limits update if the zone info query" failed to apply to 6.18-stable tree

[gregkh]

The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x 3838e80fcfb32e62baffb63c6dc0a60153665a4d
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090951-pusher-problem-219d@gregkh' --subject-prefix 'PATCH 6.18.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3838e80fcfb32e62baffb63c6dc0a60153665a4d Mon Sep 17 00:00:00 2001
From: Chao Shi <coshi036@gmail.com>
Date: Mon, 17 Aug 2026 13:58:59 -0400
Subject: [PATCH] nvme: skip the zoned limits update if the zone info query
 failed

nvme_query_zone_info() returns either a negative errno or a positive
NVMe status code, but nvme_update_ns_info_block() only tests for the
negative case:

	ret = nvme_query_zone_info(ns, lbaf, &zi);
	if (ret < 0)
		goto out;

If the device fails the Identify Namespace (I/O Command Set specific)
command, or the Identify Controller command issued by
nvme_set_max_append(), the positive status falls through and setup
continues with the zero-initialized zone info.  nvme_update_zone_info()
then marks the queue zoned with chunk_sectors and ns->head->zsze set to
zero.

blk_validate_zoned_limits() does not check chunk_sectors, so the limits
commit succeeds.  blk_revalidate_disk_zones() does reject the zero zone
size, but by then the limits are live and nothing rolls them back, so
I/O keeps being submitted to a zoned queue with a zero zone size and
disk_zone_no() shifts by ilog2(0):

  nvme0n1: Invalid non power of two zone size (0)
  UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16
  shift exponent -1 is negative
   disk_zone_no include/linux/blkdev.h:747 [inline]
   bio_straddles_zones include/linux/blkdev.h:1058 [inline]
   blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline]
   blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605
   blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196
   submit_bh_wbc+0x575/0x740 fs/buffer.c:2824
   __block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933

Any device, firmware or NVMe-oF target that fails this one command
reaches this.

Skip the zoned limits update in that case, and log which of the two
things happened: during a revalidation the queue keeps the zone
geometry it was last validated with, and on a first scan the namespace
is registered without zoned limits, so that it is still available as a
handle for admin commands.  Neither of the paths in
nvme_query_zone_info() that return a positive status logs anything, so
the failure would otherwise be silent.

zi.zone_size is an exact indicator: every path that returns a positive
status returns before it is assigned, and after that the only failure
left is -ENODEV, which the caller already handles.

Found by FuzzNvme.
Fixes: c85c9ab926a5 ("nvme: split nvme_update_zone_info")
Cc: stable@vger.kernel.org
Cc: Weidong Zhu <weizhu@fiu.edu>
Suggested-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chao Shi <coshi036@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 1322c678f4eb..74b7393dbe85 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2468,9 +2468,26 @@ static int nvme_update_ns_info_block(struct nvme_ns *ns,
 	if (!nvme_update_disk_info(ns, id, nvm, &lim))
 		capacity = 0;
 
+	/*
+	 * A failed zone info query leaves zi zero-initialized, so skip the
+	 * zoned limits update instead of configuring the queue from it.
+	 * During a revalidation that keeps the zone geometry the queue was
+	 * last validated with; on a first scan the namespace is registered
+	 * without zoned limits, so that it is still available as a handle
+	 * for admin commands.
+	 */
 	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
-	    ns->head->ids.csi == NVME_CSI_ZNS)
-		nvme_update_zone_info(ns, &lim, &zi);
+	    ns->head->ids.csi == NVME_CSI_ZNS) {
+		if (zi.zone_size)
+			nvme_update_zone_info(ns, &lim, &zi);
+		else
+			dev_warn(ns->ctrl->device,
+				 "zone info query failed for nsid %u, %s\n",
+				 ns->head->ns_id,
+				 blk_queue_is_zoned(ns->disk->queue) ?
+				 "keeping the previous zone limits" :
+				 "not enabling zoned mode");
+	}
 
 	if ((ns->ctrl->vwc & NVME_CTRL_VWC_PRESENT) && !info->no_vwc)
 		lim.features |= BLK_FEAT_WRITE_CACHE | BLK_FEAT_FUA;

[PATCH 6.18.y 1/2] nvme: fold nvme_config_discard() into nvme_update_disk_info()

[Sasha Levin]

From: Caleb Sander Mateos <csander@purestorage.com>

[ Upstream commit 9110b85244f142ca4bcaea27be408c778d3c48d0 ]

The choice of what queue limits are set in nvme_update_disk_info() vs.
nvme_config_discard() seems a bit arbitrary. A subsequent commit will
compute the discard_granularity limit using struct nvme_id_ns, which is
only passed to nvme_update_disk_info() currently. So move the logic in
nvme_config_discard() to nvme_update_disk_info(). Replace several
instances of ns->ctrl in nvme_update_disk_info() with the ctrl variable
brought from nvme_config_discard().

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Stable-dep-of: 3838e80fcfb3 ("nvme: skip the zoned limits update if the zone info query failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 43 ++++++++++++++++++----------------------
 1 file changed, 19 insertions(+), 24 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index d7199fc97f189..18685653f9b45 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1882,26 +1882,6 @@ static bool nvme_init_integrity(struct nvme_ns_head *head,
 	return true;
 }
 
-static void nvme_config_discard(struct nvme_ns *ns, struct queue_limits *lim)
-{
-	struct nvme_ctrl *ctrl = ns->ctrl;
-
-	if (ctrl->dmrsl && ctrl->dmrsl <= nvme_sect_to_lba(ns->head, UINT_MAX))
-		lim->max_hw_discard_sectors =
-			nvme_lba_to_sect(ns->head, ctrl->dmrsl);
-	else if (ctrl->oncs & NVME_CTRL_ONCS_DSM)
-		lim->max_hw_discard_sectors = UINT_MAX;
-	else
-		lim->max_hw_discard_sectors = 0;
-
-	lim->discard_granularity = lim->logical_block_size;
-
-	if (ctrl->dmrl)
-		lim->max_discard_segments = ctrl->dmrl;
-	else
-		lim->max_discard_segments = NVME_DSM_MAX_RANGES;
-}
-
 static bool nvme_ns_ids_equal(struct nvme_ns_ids *a, struct nvme_ns_ids *b)
 {
 	return uuid_equal(&a->uuid, &b->uuid) &&
@@ -2084,6 +2064,7 @@ static bool nvme_update_disk_info(struct nvme_ns *ns, struct nvme_id_ns *id,
 		struct queue_limits *lim)
 {
 	struct nvme_ns_head *head = ns->head;
+	struct nvme_ctrl *ctrl = ns->ctrl;
 	u32 bs = 1U << head->lba_shift;
 	u32 atomic_bs, phys_bs, io_opt = 0;
 	bool valid = true;
@@ -2118,11 +2099,26 @@ static bool nvme_update_disk_info(struct nvme_ns *ns, struct nvme_id_ns *id,
 	lim->physical_block_size = min(phys_bs, atomic_bs);
 	lim->io_min = phys_bs;
 	lim->io_opt = io_opt;
-	if ((ns->ctrl->quirks & NVME_QUIRK_DEALLOCATE_ZEROES) &&
-	    (ns->ctrl->oncs & NVME_CTRL_ONCS_DSM))
+	if ((ctrl->quirks & NVME_QUIRK_DEALLOCATE_ZEROES) &&
+	    (ctrl->oncs & NVME_CTRL_ONCS_DSM))
 		lim->max_write_zeroes_sectors = UINT_MAX;
 	else
-		lim->max_write_zeroes_sectors = ns->ctrl->max_zeroes_sectors;
+		lim->max_write_zeroes_sectors = ctrl->max_zeroes_sectors;
+
+	if (ctrl->dmrsl && ctrl->dmrsl <= nvme_sect_to_lba(ns->head, UINT_MAX))
+		lim->max_hw_discard_sectors =
+			nvme_lba_to_sect(ns->head, ctrl->dmrsl);
+	else if (ctrl->oncs & NVME_CTRL_ONCS_DSM)
+		lim->max_hw_discard_sectors = UINT_MAX;
+	else
+		lim->max_hw_discard_sectors = 0;
+
+	lim->discard_granularity = lim->logical_block_size;
+
+	if (ctrl->dmrl)
+		lim->max_discard_segments = ctrl->dmrl;
+	else
+		lim->max_discard_segments = NVME_DSM_MAX_RANGES;
 	return valid;
 }
 
@@ -2387,7 +2383,6 @@ static int nvme_update_ns_info_block(struct nvme_ns *ns,
 	if (!nvme_update_disk_info(ns, id, &lim))
 		capacity = 0;
 
-	nvme_config_discard(ns, &lim);
 	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
 	    ns->head->ids.csi == NVME_CSI_ZNS)
 		nvme_update_zone_info(ns, &lim, &zi);
-- 
2.53.0

[PATCH 6.18.y 2/2] nvme: skip the zoned limits update if the zone info query failed

[Sasha Levin]

From: Chao Shi <coshi036@gmail.com>

[ Upstream commit 3838e80fcfb32e62baffb63c6dc0a60153665a4d ]

nvme_query_zone_info() returns either a negative errno or a positive
NVMe status code, but nvme_update_ns_info_block() only tests for the
negative case:

	ret = nvme_query_zone_info(ns, lbaf, &zi);
	if (ret < 0)
		goto out;

If the device fails the Identify Namespace (I/O Command Set specific)
command, or the Identify Controller command issued by
nvme_set_max_append(), the positive status falls through and setup
continues with the zero-initialized zone info.  nvme_update_zone_info()
then marks the queue zoned with chunk_sectors and ns->head->zsze set to
zero.

blk_validate_zoned_limits() does not check chunk_sectors, so the limits
commit succeeds.  blk_revalidate_disk_zones() does reject the zero zone
size, but by then the limits are live and nothing rolls them back, so
I/O keeps being submitted to a zoned queue with a zero zone size and
disk_zone_no() shifts by ilog2(0):

  nvme0n1: Invalid non power of two zone size (0)
  UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16
  shift exponent -1 is negative
   disk_zone_no include/linux/blkdev.h:747 [inline]
   bio_straddles_zones include/linux/blkdev.h:1058 [inline]
   blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline]
   blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605
   blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196
   submit_bh_wbc+0x575/0x740 fs/buffer.c:2824
   __block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933

Any device, firmware or NVMe-oF target that fails this one command
reaches this.

Skip the zoned limits update in that case, and log which of the two
things happened: during a revalidation the queue keeps the zone
geometry it was last validated with, and on a first scan the namespace
is registered without zoned limits, so that it is still available as a
handle for admin commands.  Neither of the paths in
nvme_query_zone_info() that return a positive status logs anything, so
the failure would otherwise be silent.

zi.zone_size is an exact indicator: every path that returns a positive
status returns before it is assigned, and after that the only failure
left is -ENODEV, which the caller already handles.

Found by FuzzNvme.
Fixes: c85c9ab926a5 ("nvme: split nvme_update_zone_info")
Cc: stable@vger.kernel.org
Cc: Weidong Zhu <weizhu@fiu.edu>
Suggested-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chao Shi <coshi036@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 18685653f9b45..eb8c4ed246972 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2383,9 +2383,26 @@ static int nvme_update_ns_info_block(struct nvme_ns *ns,
 	if (!nvme_update_disk_info(ns, id, &lim))
 		capacity = 0;
 
+	/*
+	 * A failed zone info query leaves zi zero-initialized, so skip the
+	 * zoned limits update instead of configuring the queue from it.
+	 * During a revalidation that keeps the zone geometry the queue was
+	 * last validated with; on a first scan the namespace is registered
+	 * without zoned limits, so that it is still available as a handle
+	 * for admin commands.
+	 */
 	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
-	    ns->head->ids.csi == NVME_CSI_ZNS)
-		nvme_update_zone_info(ns, &lim, &zi);
+	    ns->head->ids.csi == NVME_CSI_ZNS) {
+		if (zi.zone_size)
+			nvme_update_zone_info(ns, &lim, &zi);
+		else
+			dev_warn(ns->ctrl->device,
+				 "zone info query failed for nsid %u, %s\n",
+				 ns->head->ns_id,
+				 blk_queue_is_zoned(ns->disk->queue) ?
+				 "keeping the previous zone limits" :
+				 "not enabling zoned mode");
+	}
 
 	if ((ns->ctrl->vwc & NVME_CTRL_VWC_PRESENT) && !info->no_vwc)
 		lim.features |= BLK_FEAT_WRITE_CACHE | BLK_FEAT_FUA;
-- 
2.53.0