From: Jennifer Guo <guojy.bj@gmail.com>
To: linux-staging@lists.linux.dev
Cc: gregkh@linuxfoundation.org, guojy.bj@gmail.com
Subject: [PATCH 3/3] staging: rtl8723bs: delete empty comment lines in header files
Date: Thu, 10 Sep 2026 15:03:59 -0700 [thread overview]
Message-ID: <20260910220359.6683-4-guojy.bj@gmail.com> (raw)
In-Reply-To: <20260910220359.6683-1-guojy.bj@gmail.com>
Delete all empty comment lines in a bunch of include/ header files.
Add back a newline if needed for spacing, while avoiding multiple blank
lines.
Signed-off-by: Jennifer Guo <guojy.bj@gmail.com>
---
drivers/staging/rtl8723bs/include/HalPwrSeqCmd.h | 2 --
drivers/staging/rtl8723bs/include/basic_types.h | 2 --
drivers/staging/rtl8723bs/include/drv_types.h | 3 ---
drivers/staging/rtl8723bs/include/hal_com.h | 5 ++---
drivers/staging/rtl8723bs/include/hal_com_h2c.h | 2 --
drivers/staging/rtl8723bs/include/hal_data.h | 1 -
drivers/staging/rtl8723bs/include/hal_phy.h | 3 +--
drivers/staging/rtl8723bs/include/rtw_eeprom.h | 2 --
drivers/staging/rtl8723bs/include/rtw_efuse.h | 4 +---
drivers/staging/rtl8723bs/include/rtw_mlme_ext.h | 2 --
drivers/staging/rtl8723bs/include/rtw_recv.h | 2 --
drivers/staging/rtl8723bs/include/sta_info.h | 7 +------
12 files changed, 5 insertions(+), 30 deletions(-)
diff --git a/drivers/staging/rtl8723bs/include/HalPwrSeqCmd.h b/drivers/staging/rtl8723bs/include/HalPwrSeqCmd.h
index b81252d374ef..a0c4461557e7 100644
--- a/drivers/staging/rtl8723bs/include/HalPwrSeqCmd.h
+++ b/drivers/staging/rtl8723bs/include/HalPwrSeqCmd.h
@@ -98,9 +98,7 @@ struct wlan_pwr_cfg {
#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value
-/* */
/* Prototype of protected function. */
-/* */
u8 HalPwrSeqCmdParsing(
struct adapter *padapter,
u8 CutVersion,
diff --git a/drivers/staging/rtl8723bs/include/basic_types.h b/drivers/staging/rtl8723bs/include/basic_types.h
index aaa1e60f4295..ff6435e2ca68 100644
--- a/drivers/staging/rtl8723bs/include/basic_types.h
+++ b/drivers/staging/rtl8723bs/include/basic_types.h
@@ -25,9 +25,7 @@
* 3. After read integer from IO.
*/
-/* */
/* Byte Swapping routine. */
-/* */
#define EF1Byte (u8)
#define EF2Byte le16_to_cpu
#define EF4Byte le32_to_cpu
diff --git a/drivers/staging/rtl8723bs/include/drv_types.h b/drivers/staging/rtl8723bs/include/drv_types.h
index 20265770ed77..9de6a3f7364b 100644
--- a/drivers/staging/rtl8723bs/include/drv_types.h
+++ b/drivers/staging/rtl8723bs/include/drv_types.h
@@ -209,7 +209,6 @@ struct dvobj_priv {
s32 processing_dev_remove;
/* for local/global synchronization */
- /* */
spinlock_t lock;
int macid[NUM_STA];
@@ -377,9 +376,7 @@ struct adapter {
#define adapter_to_pwrctl(adapter) (dvobj_to_pwrctl(adapter->dvobj))
#define adapter_wdev_data(adapter) (&((adapter)->wdev_data))
-/* */
/* Function disabled. */
-/* */
#define DF_TX_BIT BIT(0)
#define DF_RX_BIT BIT(1)
#define DF_IO_BIT BIT(2)
diff --git a/drivers/staging/rtl8723bs/include/hal_com.h b/drivers/staging/rtl8723bs/include/hal_com.h
index 17bce0f88bac..6cf4f7f678d2 100644
--- a/drivers/staging/rtl8723bs/include/hal_com.h
+++ b/drivers/staging/rtl8723bs/include/hal_com.h
@@ -15,10 +15,9 @@
/*------------------------------ Tx Desc definition Macro ------------------------*/
/* pragma mark -- Tx Desc related definition. -- */
-/* */
-/* */
+
/* Rate */
-/* */
+
/* CCK Rates, TxHT = 0 */
#define DESC_RATE1M 0x00
#define DESC_RATE2M 0x01
diff --git a/drivers/staging/rtl8723bs/include/hal_com_h2c.h b/drivers/staging/rtl8723bs/include/hal_com_h2c.h
index a59d13090565..889b12719e2e 100644
--- a/drivers/staging/rtl8723bs/include/hal_com_h2c.h
+++ b/drivers/staging/rtl8723bs/include/hal_com_h2c.h
@@ -14,9 +14,7 @@
#define H2C_MACID_CFG_LEN 7
#define H2C_RSSI_SETTING_LEN 4
-/* */
/* Structure -------------------------------------------------- */
-/* */
struct rsvdpage_loc {
u8 LocProbeRsp;
u8 LocPsPoll;
diff --git a/drivers/staging/rtl8723bs/include/hal_data.h b/drivers/staging/rtl8723bs/include/hal_data.h
index 614fd885451b..07a956cc47f6 100644
--- a/drivers/staging/rtl8723bs/include/hal_data.h
+++ b/drivers/staging/rtl8723bs/include/hal_data.h
@@ -174,7 +174,6 @@ struct hal_com_data {
/* RF: at most 2 = AB = 0/1 */
/* CCK = 0 OFDM = 1 HT-MCS 0-7 = 2 */
s8 TxPwrByRateOffset[MAX_RF_PATH_NUM][TX_PWR_BY_RATE_NUM_RATE];
- /* */
/* Power Limit Table for 2.4G */
s8 TxPwrLimit_2_4G[MAX_REGULATION_NUM]
diff --git a/drivers/staging/rtl8723bs/include/hal_phy.h b/drivers/staging/rtl8723bs/include/hal_phy.h
index ec9bc47816db..2e519a3044d8 100644
--- a/drivers/staging/rtl8723bs/include/hal_phy.h
+++ b/drivers/staging/rtl8723bs/include/hal_phy.h
@@ -6,10 +6,9 @@
******************************************************************************/
#ifndef __HAL_PHY_H__
#define __HAL_PHY_H__
-/* */
+
/* Antenna detection method, i.e., using single tone detection or RSSI reported from each antenna detected. */
/* Added by Roger, 2013.05.22. */
-/* */
#define ANT_DETECT_BY_SINGLE_TONE BIT(0)
#define ANT_DETECT_BY_RSSI BIT(1)
#define IS_ANT_DETECT_SUPPORT_SINGLE_TONE(__Adapter) ((GET_HAL_DATA(__Adapter)->AntDetection) & ANT_DETECT_BY_SINGLE_TONE)
diff --git a/drivers/staging/rtl8723bs/include/rtw_eeprom.h b/drivers/staging/rtl8723bs/include/rtw_eeprom.h
index 9b84105af816..4294b021f1bd 100644
--- a/drivers/staging/rtl8723bs/include/rtw_eeprom.h
+++ b/drivers/staging/rtl8723bs/include/rtw_eeprom.h
@@ -34,14 +34,12 @@
#define eeprom_cis0_sz 17
#define eeprom_cis1_sz 50
-/* */
/* Customer ID, note that: */
/* This variable is initiailzed through EEPROM or registry, */
/* however, its definition may be different with that in EEPROM for */
/* EEPROM size consideration. So, we have to perform proper translation between them. */
/* Besides, CustomerID of registry has precedence of that of EEPROM. */
/* defined below. 060703, by rcnjko. */
-/* */
enum {
RT_CID_DEFAULT = 0,
RT_CID_8187_ALPHA0 = 1,
diff --git a/drivers/staging/rtl8723bs/include/rtw_efuse.h b/drivers/staging/rtl8723bs/include/rtw_efuse.h
index 1e5d61f4587b..865a47637b5a 100644
--- a/drivers/staging/rtl8723bs/include/rtw_efuse.h
+++ b/drivers/staging/rtl8723bs/include/rtw_efuse.h
@@ -30,13 +30,11 @@ enum {
#define EFUSE_REPEAT_THRESHOLD_ 3
-/* */
/* The following is for BT Efuse definition */
-/* */
#define EFUSE_BT_MAX_MAP_LEN 1024
#define EFUSE_MAX_BANK 4
#define EFUSE_MAX_BT_BANK (EFUSE_MAX_BANK-1)
-/* */
+
/*--------------------------Define Parameters-------------------------------*/
#define EFUSE_MAX_WORD_UNIT 4
diff --git a/drivers/staging/rtl8723bs/include/rtw_mlme_ext.h b/drivers/staging/rtl8723bs/include/rtw_mlme_ext.h
index d486cd462509..eaa3e9e9d58f 100644
--- a/drivers/staging/rtl8723bs/include/rtw_mlme_ext.h
+++ b/drivers/staging/rtl8723bs/include/rtw_mlme_ext.h
@@ -70,14 +70,12 @@ extern unsigned char WMM_INFO_OUI[];
extern unsigned char WMM_PARA_OUI[];
-/* */
/* Channel Plan Type. */
/* Note: */
/* We just add new channel plan when the new channel plan is different from any of the following */
/* channel plan. */
/* If you just want to customize the actions(scan period or join actions) about one of the channel plan, */
/* customize them in rt_channel_info in the RT_CHANNEL_LIST. */
-/* */
enum {
/* old channel plan mapping ===== */
RT_CHANNEL_DOMAIN_FCC = 0x00,
diff --git a/drivers/staging/rtl8723bs/include/rtw_recv.h b/drivers/staging/rtl8723bs/include/rtw_recv.h
index 5c197bd6915f..3c94f97d86db 100644
--- a/drivers/staging/rtl8723bs/include/rtw_recv.h
+++ b/drivers/staging/rtl8723bs/include/rtw_recv.h
@@ -296,8 +296,6 @@ struct recv_frame_hdr {
void *precvbuf;
-
- /* */
struct sta_info *psta;
/* for A-MPDU Rx reordering buffer control */
diff --git a/drivers/staging/rtl8723bs/include/sta_info.h b/drivers/staging/rtl8723bs/include/sta_info.h
index bc78c32192c0..9fa5d5319997 100644
--- a/drivers/staging/rtl8723bs/include/sta_info.h
+++ b/drivers/staging/rtl8723bs/include/sta_info.h
@@ -189,16 +189,13 @@ struct sta_info {
/* ODM_STA_INFO_T */
/* ================ODM Relative Info ======================= */
/* Please be care, dont declare too much structure here. It will cost memory * STA support num. */
- /* */
- /* */
/* 2011/10/20 MH Add for ODM STA info. */
- /* */
/* Driver Write */
u8 bValid; /* record the sta status link or not? */
u8 IOTPeer; /* Enum value. HT_IOT_PEER_E */
/* ODM Write */
/* 1 PHY_STATUS_INFO */
- u8 RSSI_Path[4]; /* */
+ u8 RSSI_Path[4];
u8 RSSI_Ave;
u8 RXEVM[4];
u8 RXSNR[4];
@@ -207,9 +204,7 @@ struct sta_info {
/* ODM Write */
/* 1 TX_INFO (may changed by IC) */
/* TX_INFO_T pTxInfo; Define in IC folder. Move lower layer. */
- /* */
/* ================ODM Relative Info ======================= */
- /* */
/* To store the sequence number of received management frame */
u16 rx_mgmt_frame_seq_num;
--
2.34.1
prev parent reply other threads:[~2026-09-10 22:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 22:03 [PATCH 0/3] staging: rtl8723bs: delete empty comment lines Jennifer Guo
2026-09-10 22:03 ` [PATCH 1/3] staging: rtl8723bs: delete empty comment lines in hal_com_reg.h Jennifer Guo
2026-09-10 22:03 ` [PATCH 2/3] staging: rtl8723bs: delete empty comment lines in rtl8723b_*.h files Jennifer Guo
2026-09-10 22:03 ` Jennifer Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260910220359.6683-4-guojy.bj@gmail.com \
--to=guojy.bj@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.