Re: [PATCH v1 1/7] dt-bindings: arm: fsl: Add Lino iMX91/iMX93

[Krzysztof Kozlowski <krzk@kernel.org>]

On Thu, Sep 10, 2026 at 12:16:07PM +0200, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> Add bindings for the Toradex Lino iMX91 and Lino iMX93 SoMs, based on
> the NXP i.MX91 and i.MX93 SoCs, respectively.
> 
> Lino SoMs use two board-to-board connectors to interface with a carrier
> board. They can also be mounted on the Lino-Verdin Adapter, which
> converts the Lino interface to the Toradex Verdin family pinout and
> allows the SoM to be used with Verdin-compatible carrier boards.
> 
> The Lino-Verdin Adapter also provides a Wi-Fi/Bluetooth module, an
> Ethernet PHY and a GPIO expander.
> 
> Add compatibles for systems consisting of a Lino SoM mounted on a
> Lino-Verdin Adapter and connected to either a Verdin Development Board
> or a Dahlia carrier board.
> 
> Link: https://www.toradex.com/computer-on-modules/lino-arm-family/nxp-imx91
> Link: https://www.toradex.com/computer-on-modules/lino-arm-family/nxp-imx93
> Link: https://www.toradex.com/accessories/lino-verdin-adapter
> Link: https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
> Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof