From: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>,
Rakesh Kota <rakesh.kota@oss.qualcomm.com>,
Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH v6 0/4] arm64: dts: qcom: Add PMIC thermal support for Shikra platforms
Date: Fri, 11 Sep 2026 22:10:38 +0530 [thread overview]
Message-ID: <20260911-shikra_adc_support-v6-0-e4b2da5cd55c@oss.qualcomm.com> (raw)
This series adds the following:
- VADC and temp-alarm devices for PM4125 and temp-alarm device for PM8005
which are used for thermal mitigation on Shikra CQ2390M SoM platform
- ADC thermistor channels and thermal configurations for same on Shikra CQ2390M SoM
- ADC thermistor channels and their thermal configurations on Shikra IQ2390S SoM
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
---
Changes in v6:
- Rebased to latest kernel tip.
- Link to v5: https://patch.msgid.link/20260809-shikra_adc_support-v5-0-bf6882d18bad@oss.qualcomm.com
Changes in v5:
- Collected Konrad's Reviewed-by tag on patch 2.
- Rebased to latest kernel tip.
- Link to v4: https://patch.msgid.link/20260715-shikra_adc_support-v4-0-5e07b6d21429@oss.qualcomm.com
Changes in v4:
- Collected Reviewed-by tags.
- Updated the pm8005-thermal trips to hot and critical.
- Link to v3: https://patch.msgid.link/20260710-shikra_adc_support-v3-0-ddc840fca0a0@oss.qualcomm.com
Changes in v3:
- Dropping the polling-delay = <0> property from all thermal-zones as suggested by Konrad.
- Link to v2: https://patch.msgid.link/20260709-shikra_adc_support-v2-0-8dda38f7bf3d@oss.qualcomm.com
Changes in v2:
- Move thermal zones to their respective PMIC files (PM4125, PM8005) as suggested by Dmitry Baryshkov
- Rename generic-adc-thermal bridge nodes to therm-bridge suffix (msm-therm-bridge, pa-therm-bridge,
quiet-therm-bridge) as suggested by Dmitry Baryshkov
- Update commit messages accordingly
- Link to v1: https://patch.msgid.link/20260613-shikra_adc_support-v1-0-57d5e6c7f47d@oss.qualcomm.com
---
Jishnu Prakash (4):
arm64: dts: qcom: pm4125: Add VADC and temp alarm nodes
arm64: dts: qcom: pm8005: Add temp alarm node
arm64: dts: qcom: Add PMIC thermal support for Shikra CQ2390M SoM platform
arm64: dts: qcom: Add PMIC thermal support for Shikra IQ2390S SoM platform
arch/arm64/boot/dts/qcom/pm4125.dtsi | 104 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/pm8005.dtsi | 35 ++++++++
arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi | 120 +++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi | 113 +++++++++++++++++++++++++
4 files changed, 372 insertions(+)
---
base-commit: 68142f986ff04b2b70b31db00f719bf690f64a9a
change-id: 20260613-shikra_adc_support-0079650eb76c
Best regards,
--
Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
next reply other threads:[~2026-09-11 16:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-11 16:40 Jishnu Prakash [this message]
2026-09-11 16:40 ` [PATCH v6 1/4] arm64: dts: qcom: pm4125: Add VADC and temp alarm nodes Jishnu Prakash
2026-09-12 15:35 ` Abel Vesa
2026-09-11 16:40 ` [PATCH v6 2/4] arm64: dts: qcom: pm8005: Add temp alarm node Jishnu Prakash
2026-09-11 16:51 ` sashiko-bot
2026-09-12 15:35 ` Abel Vesa
2026-09-11 16:40 ` [PATCH v6 3/4] arm64: dts: qcom: Add PMIC thermal support for Shikra CQ2390M SoM platform Jishnu Prakash
2026-09-11 16:51 ` sashiko-bot
2026-09-12 15:36 ` Abel Vesa
2026-09-11 16:40 ` [PATCH v6 4/4] arm64: dts: qcom: Add PMIC thermal support for Shikra IQ2390S " Jishnu Prakash
2026-09-11 16:49 ` sashiko-bot
2026-09-12 15:36 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260911-shikra_adc_support-v6-0-e4b2da5cd55c@oss.qualcomm.com \
--to=jishnu.prakash@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kamal.wadhwa@oss.qualcomm.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rakesh.kota@oss.qualcomm.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.