[PATCH v8 13/20] drm/xe/vsec: Add base_offset to allow for more flexibilty

["Michael J. Ruhl" <michael.j.ruhl@intel.com>]

Current pmt_telem_read() usage is a fixed (for BMG) offset.
In order to support other devices this must be settable.

Add a base offset for more flexibility.
Add a check to verify that it has been set before allowing
device access.

Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
---
 drivers/gpu/drm/xe/xe_device_types.h | 2 ++
 drivers/gpu/drm/xe/xe_vsec.c         | 9 ++++++++-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/xe/xe_device_types.h b/drivers/gpu/drm/xe/xe_device_types.h
index 4661bfce2f4e..ebdc271ebeae 100644
--- a/drivers/gpu/drm/xe/xe_device_types.h
+++ b/drivers/gpu/drm/xe/xe_device_types.h
@@ -473,6 +473,8 @@ struct xe_device {
 	struct {
 		/** @pmt.lock: protect access for telemetry data */
 		struct mutex lock;
+		/** @pmt.base_offset: device specific base offset */
+		u64 base_offset;
 	} pmt;
 
 	/** @soc_remapper: SoC remapper object */
diff --git a/drivers/gpu/drm/xe/xe_vsec.c b/drivers/gpu/drm/xe/xe_vsec.c
index ca8414441a69..856973473fd7 100644
--- a/drivers/gpu/drm/xe/xe_vsec.c
+++ b/drivers/gpu/drm/xe/xe_vsec.c
@@ -173,14 +173,15 @@ static int xe_guid_decode(u32 guid, int *index, u32 *offset)
  * Return:
  * * -ENODEV device is not available (hotplug)
  * * -EINVAL for VF and PMT WATCHER requests
+ * * -EAGAIN base_offset has not been set, so init path has not yet been done.
  * * count   number of bytes read on success
  */
 int xe_pmt_telem_read(struct device *dev, u32 guid, u64 *data, loff_t user_offset,
 		      u32 count)
 {
 	struct xe_device *xe = kdev_to_xe_device(dev);
-	void __iomem *telem_addr = xe->mmio.regs + BMG_TELEMETRY_OFFSET;
 	u32 cap_type = FIELD_GET(GUID_CAP_TYPE, guid);
+	void __iomem *telem_addr = xe->mmio.regs + xe->pmt.base_offset;
 	u32 mem_region;
 	u32 offset;
 	int ret = 0;
@@ -194,6 +195,11 @@ int xe_pmt_telem_read(struct device *dev, u32 guid, u64 *data, loff_t user_offse
 		goto dev_exit;
 	}
 
+	if (!xe->pmt.base_offset) {
+		ret = -EAGAIN;
+		goto dev_exit;
+	}
+
 	ret = xe_guid_decode(guid, &mem_region, &offset);
 	if (ret)
 		goto dev_exit;
@@ -272,6 +278,7 @@ void xe_vsec_init(struct xe_device *xe)
 	case XE_VSEC_BMG:
 		if (IS_SRIOV_VF(xe))
 			return;
+		xe->pmt.base_offset = BMG_TELEMETRY_OFFSET;
 		info->priv_data = &xe_pmt_cb;
 		break;
 	default:
-- 
2.43.0