* [PATCH] board: logicpd: Remove OMAP3 SOM support
@ 2026-09-13 15:52 Adam Ford
2026-09-30 17:17 ` Tom Rini
0 siblings, 1 reply; 2+ messages in thread
From: Adam Ford @ 2026-09-13 15:52 UTC (permalink / raw)
To: u-boot; +Cc: Tom Rini, Ilias Apalodimas, Peng Fan, Jaehoon Chung, Adam Ford
Remove the Logic PD OMAP35xx/DM37xx SOM-LV and Torpedo board support
along with its defconfigs, config header, U-Boot device tree overlays,
Kconfig target and the board specific MMC PBIAS quirk.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
.../logicpd-som-lv-35xx-devkit-u-boot.dtsi | 72 ------
.../logicpd-som-lv-37xx-devkit-u-boot.dtsi | 72 ------
.../logicpd-torpedo-35xx-devkit-u-boot.dtsi | 71 ------
.../logicpd-torpedo-37xx-devkit-u-boot.dtsi | 68 -----
arch/arm/mach-omap2/omap3/Kconfig | 13 -
board/logicpd/omap3som/Kconfig | 14 -
board/logicpd/omap3som/MAINTAINERS | 9 -
board/logicpd/omap3som/Makefile | 6 -
board/logicpd/omap3som/README | 56 ----
board/logicpd/omap3som/omap3logic.c | 240 ------------------
board/logicpd/omap3som/omap3logic.h | 237 -----------------
configs/omap35_logic_defconfig | 94 -------
configs/omap35_logic_somlv_defconfig | 103 --------
configs/omap3_logic_defconfig | 93 -------
configs/omap3_logic_somlv_defconfig | 104 --------
drivers/mmc/omap_hsmmc.c | 4 -
include/configs/omap3_logic.h | 152 -----------
17 files changed, 1408 deletions(-)
delete mode 100644 arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi
delete mode 100644 arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi
delete mode 100644 arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi
delete mode 100644 arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
delete mode 100644 board/logicpd/omap3som/Kconfig
delete mode 100644 board/logicpd/omap3som/MAINTAINERS
delete mode 100644 board/logicpd/omap3som/Makefile
delete mode 100644 board/logicpd/omap3som/README
delete mode 100644 board/logicpd/omap3som/omap3logic.c
delete mode 100644 board/logicpd/omap3som/omap3logic.h
delete mode 100644 configs/omap35_logic_defconfig
delete mode 100644 configs/omap35_logic_somlv_defconfig
delete mode 100644 configs/omap3_logic_defconfig
delete mode 100644 configs/omap3_logic_somlv_defconfig
delete mode 100644 include/configs/omap3_logic.h
diff --git a/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi
deleted file mode 100644
index d77fa38746f..00000000000
--- a/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017
- * Logic PD - http://www.logicpd.com
- */
-
-#include "omap3-u-boot.dtsi"
-
-/ {
- chosen {
- stdout-path = &uart1;
- };
-
- aliases {
- /delete-property/ serial1;
- /delete-property/ serial2;
- /delete-property/ mmc1;
- /delete-property/ mmc2;
- };
-
- ethernet@08000000 {
- compatible = "smsc,lan9221","smsc,lan9115";
- reg = <0x08000000 0xff>;
- bank-width = <2>;
- vddvario-supply = <&vddvario>;
- vdd33a-supply = <&vdd33a>;
- reg-io-width = <4>;
- smsc,save-mac-address;
- };
-};
-
-&gpio1 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio2 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio3 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio4 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio5 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio6 {
- /delete-property/ bootph-pre-ram;
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- /delete-property/ bootph-pre-ram;
-};
-
-&i2c2 {
- clock-frequency = <400000>;
- /delete-property/ bootph-pre-ram;
-};
-
-/delete-node/ &bandgap;
-/delete-node/ &uart2;
-/delete-node/ &uart3;
-/delete-node/ &mmc2;
-/delete-node/ &mmc3;
-/delete-node/ &thermal_zones;
-
diff --git a/arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi
deleted file mode 100644
index d77fa38746f..00000000000
--- a/arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017
- * Logic PD - http://www.logicpd.com
- */
-
-#include "omap3-u-boot.dtsi"
-
-/ {
- chosen {
- stdout-path = &uart1;
- };
-
- aliases {
- /delete-property/ serial1;
- /delete-property/ serial2;
- /delete-property/ mmc1;
- /delete-property/ mmc2;
- };
-
- ethernet@08000000 {
- compatible = "smsc,lan9221","smsc,lan9115";
- reg = <0x08000000 0xff>;
- bank-width = <2>;
- vddvario-supply = <&vddvario>;
- vdd33a-supply = <&vdd33a>;
- reg-io-width = <4>;
- smsc,save-mac-address;
- };
-};
-
-&gpio1 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio2 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio3 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio4 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio5 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio6 {
- /delete-property/ bootph-pre-ram;
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- /delete-property/ bootph-pre-ram;
-};
-
-&i2c2 {
- clock-frequency = <400000>;
- /delete-property/ bootph-pre-ram;
-};
-
-/delete-node/ &bandgap;
-/delete-node/ &uart2;
-/delete-node/ &uart3;
-/delete-node/ &mmc2;
-/delete-node/ &mmc3;
-/delete-node/ &thermal_zones;
-
diff --git a/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi
deleted file mode 100644
index d14d68e458a..00000000000
--- a/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017
- * Logic PD - http://www.logicpd.com
- */
-
-#include "omap3-u-boot.dtsi"
-
-/ {
- chosen {
- stdout-path = &uart1;
- };
-
- aliases {
- /delete-property/ serial1;
- /delete-property/ serial2;
- /delete-property/ mmc1;
- /delete-property/ mmc2;
- };
-
- ethernet@08000000 {
- compatible = "smsc,lan9221","smsc,lan9115";
- reg = <0x08000000 0xff>;
- bank-width = <2>;
- vddvario-supply = <&vddvario>;
- vdd33a-supply = <&vdd33a>;
- reg-io-width = <4>;
- smsc,save-mac-address;
- };
-};
-
-&gpio1 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio2 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio3 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio4 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio5 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio6 {
- /delete-property/ bootph-pre-ram;
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- /delete-property/ bootph-pre-ram;
-};
-
-&i2c2 {
- clock-frequency = <400000>;
- /delete-property/ bootph-pre-ram;
-};
-
-/delete-node/ &bandgap;
-/delete-node/ &uart2;
-/delete-node/ &uart3;
-/delete-node/ &mmc2;
-/delete-node/ &mmc3;
-/delete-node/ &thermal_zones;
diff --git a/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
deleted file mode 100644
index 8e8e2e4096f..00000000000
--- a/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017
- * Logic PD - http://www.logicpd.com
- */
-
-#include "omap3-u-boot.dtsi"
-
-/ {
- aliases {
- /delete-property/ serial1;
- /delete-property/ serial2;
- /delete-property/ mmc1;
- /delete-property/ mmc2;
- };
-
- ethernet@08000000 {
- compatible = "smsc,lan9221","smsc,lan9115";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x08000000 0xff>;
- bank-width = <2>;
- vddvario-supply = <&vddvario>;
- vdd33a-supply = <&vdd33a>;
- reg-io-width = <4>;
- smsc,save-mac-address;
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- /delete-property/ bootph-pre-ram;
-};
-
-&i2c2 {
- clock-frequency = <400000>;
-};
-
-&gpio1 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio2 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio3 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio4 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio5 {
- /delete-property/ bootph-pre-ram;
-};
-
-&gpio6 {
- /delete-property/ bootph-pre-ram;
-};
-
-/delete-node/ &bandgap;
-/delete-node/ &uart2;
-/delete-node/ &uart3;
-/delete-node/ &mmc2;
-/delete-node/ &mmc3;
-/delete-node/ &thermal_zones;
diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig
index 79e24acba8d..61e1c1a2854 100644
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -70,18 +70,6 @@ config TARGET_OMAP3_PANDORA
select OMAP3_GPIO_4
select OMAP3_GPIO_6
-config TARGET_OMAP3_LOGIC
- bool "OMAP3 Logic"
- select BOARD_LATE_INIT
- select DM
- select DM_GPIO
- select DM_SERIAL
- select OMAP3_GPIO_3
- select OMAP3_GPIO_4
- select OMAP3_GPIO_6
- imply CMD_DM
- imply VIDEO_DAMAGE
-
config TARGET_TAO3530
bool "TAO3530"
select OMAP3_GPIO_2
@@ -132,7 +120,6 @@ config SYS_SOC
source "board/timll/devkit8000/Kconfig"
source "board/ti/omap3evm/Kconfig"
source "board/isee/igep00x0/Kconfig"
-source "board/logicpd/omap3som/Kconfig"
source "board/lg/sniper/Kconfig"
endif
diff --git a/board/logicpd/omap3som/Kconfig b/board/logicpd/omap3som/Kconfig
deleted file mode 100644
index 68d40dcd62d..00000000000
--- a/board/logicpd/omap3som/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-if TARGET_OMAP3_LOGIC
-
-config SYS_BOARD
- default "omap3som"
-
-config SYS_VENDOR
- default "logicpd"
-
-config SYS_CONFIG_NAME
- default "omap3_logic"
-
-source "board/ti/common/Kconfig"
-
-endif
diff --git a/board/logicpd/omap3som/MAINTAINERS b/board/logicpd/omap3som/MAINTAINERS
deleted file mode 100644
index 459393cf54c..00000000000
--- a/board/logicpd/omap3som/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-OMAP3SOM BOARD
-M: Adam Ford <aford173@gmail.com>
-S: Maintained
-F: board/logicpd/omap3som/
-F: include/configs/omap3_logic.h
-F: configs/omap3_logic_defconfig
-F: configs/omap35_logic_defconfig
-F: configs/omap35_logic_somlv_defconfig
-F: configs/omap3_logic_somlv_defconfig
diff --git a/board/logicpd/omap3som/Makefile b/board/logicpd/omap3som/Makefile
deleted file mode 100644
index 61ef14e87a0..00000000000
--- a/board/logicpd/omap3som/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y := omap3logic.o
diff --git a/board/logicpd/omap3som/README b/board/logicpd/omap3som/README
deleted file mode 100644
index 5aaf58f0a69..00000000000
--- a/board/logicpd/omap3som/README
+++ /dev/null
@@ -1,56 +0,0 @@
-Summary
-=======
-
-The source for omap3logic.c encompases the OMAP35 and DM3730 SOM-LV and DM3730 Torpedo platforms, but there are device trees custom taylored to each board.
-
-omap3_logic_defconfig = DM37 Torpedo / Torpedo + Wireless
-omap35_logic_defconfig = OMAP35 Torpedo
-omap3_logic_somlv_defconfig = DM37 SOM-LV
-omap35_logic_somlv_defconfig = OMAP35 SOM-LV
-
-The device tree included with each of the defconfig files will also direct the board as to which dtb file to load when loading the kernel, so it is not
-recomended to mix and match the defconfig files.
-
-Falcon Mode: FAT SD cards
-=========================
-
-In this case the additional file is written to the filesystem. In this
-example we assume that the uImage and device tree to be used are already on
-the FAT filesystem (only the uImage MUST be for this to function
-afterwards) along with a Falcon Mode aware MLO and the FAT partition has
-already been created and marked bootable:
-
-U-Boot # mmc rescan
-# Load kernel and device tree into memory, perform export
-U-Boot # fatload mmc 0 ${loadaddr} uImage
-U-Boot # run loadfdt
-U-Boot # setenv optargs quiet
-U-Boot # run mmcargs
-U-Boot # run common_bootargs
-U-Boot # spl export fdt ${loadaddr} - ${fdtaddr}
-
-This will print a number of lines and then end with something like:
- Loading Device Tree to 8dec9000, end 8dee0295 ... OK
-
-So then note the starting address and write the args to mmc/sd:
-
-U-Boot # fatwrite mmc 0:1 0x8dec9000 args 0x20000
-
-The size of 0x20000 matches the CMD_SPL_WRITE_SIZE.
-
-Falcon Mode: NAND
-=================
-
-In this case the additional data is written to another partition of the
-NAND. In this example we assume that the uImage and device tree to be are
-already located on the NAND somewhere (such as filesystem or mtd partition)
-along with a Falcon Mode aware MLO written to the correct locations for
-booting and mtdparts have been configured correctly for the board:
-
-U-Boot # nand read ${loadaddr} kernel
-U-Boot # load nand rootfs ${fdtaddr} /boot/am335x-evm.dtb
-U-Boot # run nandargs
-U-Boot # run common_bootargs
-U-Boot # spl export fdt ${loadaddr} - ${fdtaddr}
-U-Boot # nand erase.part u-boot-spl-os
-U-Boot # nand write ${fdtaddr} u-boot-spl-os
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
deleted file mode 100644
index 352b519b451..00000000000
--- a/board/logicpd/omap3som/omap3logic.c
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2011
- * Logic Product Development <www.logicpd.com>
- *
- * Author :
- * Peter Barada <peter.barada@logicpd.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <khasim@ti.com>
- */
-#include <config.h>
-#include <dm.h>
-#include <init.h>
-#include <net.h>
-#include <ns16550.h>
-#include <nand.h>
-#include <i2c.h>
-#include <serial.h>
-#include <twl4030.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/omap_mmc.h>
-#include <asm/mach-types.h>
-#include <linux/mtd/rawnand.h>
-#include <asm/omap_musb.h>
-#include <linux/errno.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/musb.h>
-#include "omap3logic.h"
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG1 0x00011203
-#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG2 0x000A1302
-#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG3 0x000F1302
-#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG4 0x0A021303
-#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG5 0x00120F18
-#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG6 0x0A030000
-#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG7 0x00000C50
-
-#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG1 0x00011203
-#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG2 0x00091102
-#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG3 0x000D1102
-#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG4 0x09021103
-#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG5 0x00100D15
-#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG6 0x09030000
-#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG7 0x00000C50
-
-#define CFG_SMC911X_BASE 0x08000000
-
-#ifdef CONFIG_SPL_OS_BOOT
-int spl_start_uboot(void)
-{
- /* break into full u-boot on 'c' */
- return serial_tstc() && serial_getc() == 'c';
-}
-#endif
-
-#if defined(CONFIG_XPL_BUILD)
-/*
- * Routine: get_board_mem_timings
- * Description: If we use SPL then there is no x-loader nor config header
- * so we have to setup the DDR timings ourself on the first bank. This
- * provides the timing values back to the function that configures
- * the memory.
- */
-void get_board_mem_timings(struct board_sdrc_timings *timings)
-{
- timings->mr = MICRON_V_MR_165;
-
- if (get_cpu_family() == CPU_OMAP36XX) {
- /* 200 MHz works for OMAP36/DM37 */
- /* 256MB DDR */
- timings->mcfg = MICRON_V_MCFG_200(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
- } else {
- /* 165 MHz works for OMAP35 */
- timings->mcfg = MICRON_V_MCFG_165(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_165;
- timings->ctrlb = MICRON_V_ACTIMB_165;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
- }
-}
-
-#define GPMC_NAND_COMMAND_0 (OMAP34XX_GPMC_BASE + 0x7c)
-#define GPMC_NAND_DATA_0 (OMAP34XX_GPMC_BASE + 0x84)
-#define GPMC_NAND_ADDRESS_0 (OMAP34XX_GPMC_BASE + 0x80)
-
-void spl_board_prepare_for_linux(void)
-{
- /* The Micron NAND starts locked which
- * prohibits mounting the NAND as RW
- * The following commands are what unlocks
- * the NAND to become RW Falcon Mode does not
- * have as many smarts as U-Boot, but Logic PD
- * only makes NAND with 512MB so these hard coded
- * values should work for all current models
- */
-
- writeb(0x70, GPMC_NAND_COMMAND_0);
- writeb(-1, GPMC_NAND_DATA_0);
- writeb(0x7a, GPMC_NAND_COMMAND_0);
- writeb(0x00, GPMC_NAND_ADDRESS_0);
- writeb(0x00, GPMC_NAND_ADDRESS_0);
- writeb(0x00, GPMC_NAND_ADDRESS_0);
- writeb(-1, GPMC_NAND_COMMAND_0);
-
- /* Begin address 0 */
- writeb(NAND_CMD_UNLOCK1, 0x6e00007c);
- writeb(0x00, GPMC_NAND_ADDRESS_0);
- writeb(0x00, GPMC_NAND_ADDRESS_0);
- writeb(0x00, GPMC_NAND_ADDRESS_0);
- writeb(-1, GPMC_NAND_DATA_0);
-
- /* Ending address at the end of Flash */
- writeb(NAND_CMD_UNLOCK2, GPMC_NAND_COMMAND_0);
- writeb(0xc0, GPMC_NAND_ADDRESS_0);
- writeb(0xff, GPMC_NAND_ADDRESS_0);
- writeb(0x03, GPMC_NAND_ADDRESS_0);
- writeb(-1, GPMC_NAND_DATA_0);
- writeb(0x79, GPMC_NAND_COMMAND_0);
- writeb(-1, GPMC_NAND_DATA_0);
- writeb(-1, GPMC_NAND_DATA_0);
-}
-#endif
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
- twl4030_power_init();
- twl4030_power_mmc_init(0);
- omap_die_id_display();
- return 0;
-}
-
-#if defined(CONFIG_FLASH_CFI_DRIVER)
-static const u32 gpmc_dm37_c2nor_config[] = {
- LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG1,
- LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG2,
- LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG3,
- LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG4,
- LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG5,
- LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG6,
- LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG7
-};
-
-static const u32 gpmc_omap35_c2nor_config[] = {
- LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG1,
- LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG2,
- LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG3,
- LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG4,
- LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG5,
- LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG6,
- LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG7
-};
-#endif
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-#if defined(CONFIG_FLASH_CFI_DRIVER)
- if (get_cpu_family() == CPU_OMAP36XX) {
- /* Enable CS2 for NOR Flash */
- enable_gpmc_cs_config(gpmc_dm37_c2nor_config, &gpmc_cfg->cs[2],
- 0x10000000, GPMC_SIZE_64M);
- } else {
- enable_gpmc_cs_config(gpmc_omap35_c2nor_config, &gpmc_cfg->cs[2],
- 0x10000000, GPMC_SIZE_64M);
- }
-#endif
- return 0;
-}
-
-#ifdef CONFIG_BOARD_LATE_INIT
-
-static void unlock_nand(void)
-{
- int dev = nand_curr_device;
- struct mtd_info *mtd;
-
- mtd = get_nand_dev_by_index(dev);
- nand_unlock(mtd, 0, mtd->size, 0);
-}
-
-#ifdef CONFIG_SMC911X
-/* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
-static const u32 gpmc_lan92xx_config[] = {
- NET_LAN92XX_GPMC_CONFIG1,
- NET_LAN92XX_GPMC_CONFIG2,
- NET_LAN92XX_GPMC_CONFIG3,
- NET_LAN92XX_GPMC_CONFIG4,
- NET_LAN92XX_GPMC_CONFIG5,
- NET_LAN92XX_GPMC_CONFIG6,
-};
-#endif
-
-int board_late_init(void)
-{
-#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
- unlock_nand();
-#endif
-
-#ifdef CONFIG_SMC911X
- enable_gpmc_cs_config(gpmc_lan92xx_config, &gpmc_cfg->cs[1],
- CFG_SMC911X_BASE, GPMC_SIZE_16M);
-#endif
- return 0;
-}
-#endif
-
-#if defined(CONFIG_MMC)
-void board_mmc_power_init(void)
-{
- twl4030_power_mmc_init(0);
-}
-#endif
diff --git a/board/logicpd/omap3som/omap3logic.h b/board/logicpd/omap3som/omap3logic.h
deleted file mode 100644
index 55d8f429513..00000000000
--- a/board/logicpd/omap3som/omap3logic.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Logic Product Development <www.logicpd.com>
- *
- * Author:
- * Peter Barada <peter.barada@logicpd.com>
- */
-#ifndef _OMAP3LOGIC_H_
-#define _OMAP3LOGIC_H_
-
-/*
- * OMAP3 GPMC register settings for CS1 LAN922x
- */
-#define NET_LAN92XX_GPMC_CONFIG1 0x00001000
-#define NET_LAN92XX_GPMC_CONFIG2 0x00080801
-#define NET_LAN92XX_GPMC_CONFIG3 0x00000000
-#define NET_LAN92XX_GPMC_CONFIG4 0x08010801
-#define NET_LAN92XX_GPMC_CONFIG5 0x00080a0a
-#define NET_LAN92XX_GPMC_CONFIG6 0x03000280
-
-const omap3_sysinfo sysinfo = {
- DDR_DISCRETE,
- "Logic DM37x/OMAP35x reference board",
- "NAND",
-};
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/
- MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*SDRC_CKE0*/
- MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | DIS | M0)) /*SDRC_CKE1*/
-
- MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/
- MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/
- MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/
- MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/
- MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/
- MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/
- MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/
- MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/
- MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/
- MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/
- MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/
- MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/
- MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/
- MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/
- MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/
- MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/
- MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/
- MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/
- MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/
- MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/
- MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/
- MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/
- MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/
- MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/
- MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/
- MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/
- MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/
- MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) /*GPMC_nCS4*/
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/
- MUX_VAL(CP(GPMC_NCS6), (IEN | PTU | EN | M0)) /*GPMC_nCS6*/
- MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)) /*GPMC_nCS7*/
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) /*GPMC_CLK*/
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*GPMC_nBE0_CLE*/
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) /*GPMC_nBE1*/
- MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/
-
- MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/
-
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/
- MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/
-
- MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/
- MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/
- MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/
- MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/
- MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/
-
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) /*ETK_CLK*/
- MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) /*ETK_CTL*/
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)) /*ETK_D0*/
- MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)) /*ETK_D1*/
- MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)) /*ETK_D2*/
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)) /*ETK_D3*/
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)) /*ETK_D4*/
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)) /*ETK_D5*/
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)) /*ETK_D6*/
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)) /*ETK_D7*/
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)) /*ETK_D8*/
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)) /*ETK_D9*/
-#ifndef CONFIG_USB_EHCI_OMAP /* Torpedo does not use EHCI_OMAP */
- MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) /*ETK_D10*/
- MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) /*ETK_D11*/
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) /*ETK_D12*/
- MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) /*ETK_D13*/
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) /*ETK_D14*/
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) /*ETK_D15*/
-#endif
-
- MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/
- MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/
- MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/
- MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/
- MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/
- MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/
- MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/
- MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/
- MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/
- MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/
- MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/
- MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/
- MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/
- MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/
- MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/
- MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/
- MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/
- MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/
- MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/
- MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/
- MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/
- MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/
- MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/
- MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/
- MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/
- MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/
- MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/
- MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/
- MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/
- MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/
- MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/
- MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/
- MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/
- MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/
- MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/
- MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/
- MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/
- MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/
- MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */
- MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */
- MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/
- MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/
- MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/
- MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/
- MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/
- MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/
- MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/
- MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/
- MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/
- MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/
- MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/
- MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/
- MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/
- MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/
- MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/
- MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/
- MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/
- MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/
- MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/
- MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/
- MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/
- MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/
- MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/
-}
-
-#endif
diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
deleted file mode 100644
index 61d8003af66..00000000000
--- a/configs/omap35_logic_defconfig
+++ /dev/null
@@ -1,94 +0,0 @@
-CONFIG_ARM=y
-# CONFIG_SPL_USE_ARCH_MEMCPY is not set
-# CONFIG_SPL_USE_ARCH_MEMSET is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TEXT_BASE=0x80100000
-CONFIG_SYS_MALLOC_F_LEN=0x3000
-CONFIG_TI_COMMON_CMD_OPTIONS=y
-# CONFIG_SPL_GPIO is not set
-CONFIG_DEFAULT_DEVICE_TREE="ti/omap/logicpd-torpedo-35xx-devkit"
-CONFIG_TARGET_OMAP3_LOGIC=y
-# CONFIG_SPL_OMAP3_ID_NAND is not set
-CONFIG_SPL=y
-CONFIG_LTO=y
-CONFIG_ANDROID_BOOT_IMAGE=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run autoboot"
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv preboot;saveenv;"
-CONFIG_DEFAULT_FDT_FILE="logicpd-torpedo-35xx-devkit.dtb"
-CONFIG_SYS_PBSIZE=1054
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_FS_EXT4 is not set
-# CONFIG_SPL_I2C is not set
-CONFIG_SPL_MTD=y
-CONFIG_SPL_NAND_DRIVERS=y
-CONFIG_SPL_NAND_ECC=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
-CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
-CONFIG_SPL_FALCON_BOOT_MMCSD=y
-CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
-CONFIG_SYS_PROMPT="OMAP Logic # "
-# CONFIG_CMD_IMI is not set
-CONFIG_CMD_SPL_NAND_OFS=0x240000
-CONFIG_CMD_SPL_WRITE_SIZE=0x20000
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_LOCK_UNLOCK=y
-CONFIG_SYS_DISABLE_AUTOLOAD=y
-CONFIG_CMD_UUID=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
-CONFIG_ENV_OVERWRITE=y
-# CONFIG_ENV_IS_IN_FAT is not set
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
-CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
-CONFIG_SYS_NAND_MAX_OOBFREE=2
-CONFIG_SYS_NAND_MAX_ECCPOS=56
-CONFIG_SMC911X=y
-CONFIG_SMC911X_32_BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_DM_PMIC=y
-# CONFIG_SPL_PMIC_CHILDREN is not set
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_OMAP is not set
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_TWL4030_USB=y
-CONFIG_BCH=y
diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig
deleted file mode 100644
index ac792437a28..00000000000
--- a/configs/omap35_logic_somlv_defconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-CONFIG_ARM=y
-# CONFIG_SPL_USE_ARCH_MEMCPY is not set
-# CONFIG_SPL_USE_ARCH_MEMSET is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TEXT_BASE=0x80100000
-CONFIG_SYS_MALLOC_F_LEN=0x3000
-CONFIG_TI_COMMON_CMD_OPTIONS=y
-# CONFIG_SPL_GPIO is not set
-CONFIG_DEFAULT_DEVICE_TREE="ti/omap/logicpd-som-lv-35xx-devkit"
-CONFIG_TARGET_OMAP3_LOGIC=y
-# CONFIG_SPL_OMAP3_ID_NAND is not set
-CONFIG_SPL=y
-CONFIG_LTO=y
-CONFIG_SYS_MONITOR_BASE=0x10000000
-CONFIG_ANDROID_BOOT_IMAGE=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run autoboot"
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv preboot;saveenv;"
-CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-35xx-devkit.dtb"
-CONFIG_SYS_PBSIZE=1054
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_FS_EXT4 is not set
-# CONFIG_SPL_I2C is not set
-CONFIG_SPL_MTD=y
-CONFIG_SPL_NAND_DRIVERS=y
-CONFIG_SPL_NAND_ECC=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
-CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
-CONFIG_SPL_FALCON_BOOT_MMCSD=y
-CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
-# CONFIG_SPL_POWER is not set
-CONFIG_SYS_PROMPT="OMAP Logic # "
-# CONFIG_CMD_IMI is not set
-CONFIG_CMD_SPL_NAND_OFS=0x240000
-CONFIG_CMD_SPL_WRITE_SIZE=0x20000
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_LOCK_UNLOCK=y
-CONFIG_SYS_DISABLE_AUTOLOAD=y
-CONFIG_CMD_UUID=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0,nor0=physmap-flash.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs);physmap-flash.0:-(nor)"
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
-CONFIG_ENV_OVERWRITE=y
-# CONFIG_ENV_IS_IN_FAT is not set
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_SPL_DM=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y
-CONFIG_FLASH_SHOW_PROGRESS=0
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_MAX_FLASH_SECT=256
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
-CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
-CONFIG_SYS_NAND_MAX_OOBFREE=2
-CONFIG_SYS_NAND_MAX_ECCPOS=56
-CONFIG_SMC911X=y
-CONFIG_SMC911X_32_BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_DM_PMIC=y
-# CONFIG_SPL_PMIC_CHILDREN is not set
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_TWL4030_USB=y
-CONFIG_BCH=y
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
deleted file mode 100644
index 6eebb9cc4e1..00000000000
--- a/configs/omap3_logic_defconfig
+++ /dev/null
@@ -1,93 +0,0 @@
-CONFIG_ARM=y
-# CONFIG_SPL_USE_ARCH_MEMCPY is not set
-# CONFIG_SPL_USE_ARCH_MEMSET is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TEXT_BASE=0x80100000
-CONFIG_SYS_MALLOC_F_LEN=0x3000
-CONFIG_TI_COMMON_CMD_OPTIONS=y
-# CONFIG_SPL_GPIO is not set
-CONFIG_DEFAULT_DEVICE_TREE="ti/omap/logicpd-torpedo-37xx-devkit"
-CONFIG_TARGET_OMAP3_LOGIC=y
-# CONFIG_SPL_OMAP3_ID_NAND is not set
-CONFIG_SPL=y
-CONFIG_LTO=y
-CONFIG_ANDROID_BOOT_IMAGE=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run autoboot"
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv preboot;saveenv;"
-CONFIG_SYS_PBSIZE=1054
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_FS_EXT4 is not set
-# CONFIG_SPL_I2C is not set
-CONFIG_SPL_MTD=y
-CONFIG_SPL_NAND_DRIVERS=y
-CONFIG_SPL_NAND_ECC=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
-CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
-CONFIG_SPL_FALCON_BOOT_MMCSD=y
-CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
-CONFIG_SYS_PROMPT="OMAP Logic # "
-# CONFIG_CMD_IMI is not set
-CONFIG_CMD_SPL_NAND_OFS=0x240000
-CONFIG_CMD_SPL_WRITE_SIZE=0x20000
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_LOCK_UNLOCK=y
-CONFIG_SYS_DISABLE_AUTOLOAD=y
-CONFIG_CMD_UUID=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
-CONFIG_ENV_OVERWRITE=y
-# CONFIG_ENV_IS_IN_FAT is not set
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_SPL_DM=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MMC_OMAP36XX_PINS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
-CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
-CONFIG_SYS_NAND_MAX_OOBFREE=2
-CONFIG_SYS_NAND_MAX_ECCPOS=56
-CONFIG_SMC911X=y
-CONFIG_SMC911X_32_BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_DM_PMIC=y
-# CONFIG_SPL_PMIC_CHILDREN is not set
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_OMAP is not set
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_TWL4030_USB=y
-CONFIG_BCH=y
diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig
deleted file mode 100644
index f2b4f83ff19..00000000000
--- a/configs/omap3_logic_somlv_defconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-CONFIG_ARM=y
-# CONFIG_SPL_USE_ARCH_MEMCPY is not set
-# CONFIG_SPL_USE_ARCH_MEMSET is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TEXT_BASE=0x80100000
-CONFIG_SYS_MALLOC_F_LEN=0x3000
-CONFIG_TI_COMMON_CMD_OPTIONS=y
-# CONFIG_SPL_GPIO is not set
-CONFIG_DEFAULT_DEVICE_TREE="ti/omap/logicpd-som-lv-37xx-devkit"
-CONFIG_TARGET_OMAP3_LOGIC=y
-# CONFIG_SPL_OMAP3_ID_NAND is not set
-CONFIG_SPL=y
-CONFIG_LTO=y
-CONFIG_SYS_MONITOR_BASE=0x10000000
-CONFIG_ANDROID_BOOT_IMAGE=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run autoboot"
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv preboot;saveenv;"
-CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-37xx-devkit.dtb"
-CONFIG_SYS_PBSIZE=1054
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_FS_EXT4 is not set
-# CONFIG_SPL_I2C is not set
-CONFIG_SPL_MTD=y
-CONFIG_SPL_NAND_DRIVERS=y
-CONFIG_SPL_NAND_ECC=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
-CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
-CONFIG_SPL_FALCON_BOOT_MMCSD=y
-CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
-# CONFIG_SPL_POWER is not set
-CONFIG_SYS_PROMPT="OMAP Logic # "
-# CONFIG_CMD_IMI is not set
-CONFIG_CMD_SPL_NAND_OFS=0x240000
-CONFIG_CMD_SPL_WRITE_SIZE=0x20000
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_LOCK_UNLOCK=y
-CONFIG_SYS_DISABLE_AUTOLOAD=y
-CONFIG_CMD_UUID=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0,nor0=physmap-flash.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs);physmap-flash.0:-(nor)"
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_UPSTREAM=y
-CONFIG_ENV_OVERWRITE=y
-# CONFIG_ENV_IS_IN_FAT is not set
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_SPL_DM=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MMC_OMAP36XX_PINS=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y
-CONFIG_FLASH_SHOW_PROGRESS=0
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_MAX_FLASH_SECT=256
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
-CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
-CONFIG_SYS_NAND_MAX_OOBFREE=2
-CONFIG_SYS_NAND_MAX_ECCPOS=56
-CONFIG_SMC911X=y
-CONFIG_SMC911X_32_BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_DM_PMIC=y
-# CONFIG_SPL_PMIC_CHILDREN is not set
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_TWL4030_USB=y
-CONFIG_BCH=y
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index ae742080643..2cf3e4e5d34 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -226,10 +226,6 @@ static unsigned char mmc_board_init(struct mmc *mmc)
/* for cairo board, we need to set up 1.8 Volt bias level on MMC1 */
pbias_lite &= ~PBIASLITEVMODE0;
#endif
-#ifdef CONFIG_TARGET_OMAP3_LOGIC
- /* For Logic PD board, 1.8V bias to go enable gpio127 for mmc_cd */
- pbias_lite &= ~PBIASLITEVMODE1;
-#endif
#ifdef CONFIG_MMC_OMAP36XX_PINS
if (get_cpu_family() == CPU_OMAP36XX) {
/* Disable extended drain IO before changing PBIAS */
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
deleted file mode 100644
index 957f1c369e6..00000000000
--- a/include/configs/omap3_logic.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
- * Peter Barada <peter.barada@logicpd.com>
- *
- * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
- * reference boards.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* High Level Configuration Options */
-
-#include <configs/ti_omap3_common.h>
-
-/* Board NAND Info. */
-#ifdef CONFIG_MTD_RAW_NAND
- /* NAND devices */
-#define CFG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
- 13, 14, 16, 17, 18, 19, 20, 21, 22, \
- 23, 24, 25, 26, 27, 28, 30, 31, 32, \
- 33, 34, 35, 36, 37, 38, 39, 40, 41, \
- 42, 44, 45, 46, 47, 48, 49, 50, 51, \
- 52, 53, 54, 55, 56}
-
-#define CFG_SYS_NAND_ECCSIZE 512
-#define CFG_SYS_NAND_ECCBYTES 13
-#endif
-
-/* Environment information */
-
-#define CFG_EXTRA_ENV_SETTINGS \
- DEFAULT_LINUX_BOOT_ENV \
- "mmcdev=0\0" \
- "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
- "mmcrootfstype=ext4 rootwait\0" \
- "nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
- "nandrootfstype=ubifs rootwait\0" \
- "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "run defaultboot;" \
- "fi; " \
- "else run defaultboot; fi\0" \
- "defaultboot=run mmcramboot\0" \
- "consoledevice=ttyS0\0" \
- "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
- "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
- "rotation=0\0" \
- "vrfb_arg=if itest ${rotation} -ne 0; then " \
- "setenv bootargs ${bootargs} omapfb.vrfb=y " \
- "omapfb.rotate=${rotation}; " \
- "fi\0" \
- "optargs=ignore_loglevel early_printk no_console_suspend\0" \
- "common_bootargs=run setconsole; setenv bootargs " \
- "${bootargs} "\
- "console=${console} " \
- "${mtdparts} "\
- "${optargs}; " \
- "run vrfb_arg\0" \
- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- "bootscript=echo 'Running bootscript from mmc ...'; " \
- "source ${loadaddr}\0" \
- "loadimage=mmc rescan; " \
- "load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
- "ramdisksize=64000\0" \
- "ramdiskimage=rootfs.ext2.gz.uboot\0" \
- "loadramdisk=mmc rescan; " \
- "load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \
- "ramargs=setenv bootargs "\
- "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
- "mmcargs=setenv bootargs "\
- "root=PARTUUID=${uuid} " \
- "rootfstype=${mmcrootfstype} rw\0" \
- "nandargs=setenv bootargs "\
- "root=${nandroot} " \
- "rootfstype=${nandrootfstype}\0" \
- "nfsargs=setenv serverip ${tftpserver}; " \
- "setenv bootargs root=/dev/nfs " \
- "nfsroot=${nfsrootpath} " \
- "ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
- "nfsrootpath=/opt/nfs-exports/omap\0" \
- "fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
- "loadfdt=mmc rescan; " \
- "load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
- "mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
- "run finduuid; "\
- "run mmcargs; " \
- "run common_bootargs; " \
- "run dump_bootargs; " \
- "run loadimage; " \
- "run loadfdt;\0 " \
- "mmcbootz=setenv bootfile zImage; " \
- "run mmcbootcommon; "\
- "bootz ${loadaddr} - ${fdtaddr}\0" \
- "mmcboot=setenv bootfile uImage; "\
- "run mmcbootcommon; "\
- "bootm ${loadaddr} - ${fdtaddr}\0" \
- "mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \
- "run ramargs; " \
- "run common_bootargs; " \
- "run dump_bootargs; " \
- "run loadimage; " \
- "run loadfdt; " \
- "run loadramdisk\0" \
- "mmcramboot=setenv bootfile uImage; " \
- "run mmcrambootcommon; " \
- "bootm ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
- "mmcrambootz=setenv bootfile zImage; " \
- "run mmcrambootcommon; " \
- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
- "tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
- "run ramargs; " \
- "run common_bootargs; " \
- "run dump_bootargs; " \
- "tftpboot ${loadaddr} ${zimage}; " \
- "tftpboot ${rdaddr} ${ramdiskimage}; " \
- "bootm ${loadaddr} ${rdaddr}\0" \
- "tftpbootz=echo 'Booting kernel NFS rootfs...'; " \
- "dhcp;" \
- "run nfsargs;" \
- "run common_bootargs;" \
- "run dump_bootargs;" \
- "tftpboot $loadaddr zImage;" \
- "bootz $loadaddr\0" \
- "nandbootcommon=echo 'Booting kernel from NAND...';" \
- "run nandargs;" \
- "run common_bootargs;" \
- "run dump_bootargs;" \
- "nand read ${loadaddr} kernel;" \
- "nand read ${fdtaddr} spl-os;\0" \
- "nandbootz=run nandbootcommon; "\
- "bootz ${loadaddr} - ${fdtaddr}\0"\
- "nandboot=run nandbootcommon; "\
- "bootm ${loadaddr} - ${fdtaddr}\0"\
-
-/* Miscellaneous configurable options */
-
-/* memtest works on */
-
-/* FLASH and environment organization */
-
-/* **** PISMO SUPPORT *** */
-#if defined(CONFIG_CMD_NAND)
-#define CFG_SYS_FLASH_BASE 0x10000000
-#endif
-
-#define CFG_SYS_FLASH_SIZE 0x4000000
-
-#endif /* __CONFIG_H */
--
2.53.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] board: logicpd: Remove OMAP3 SOM support
2026-09-13 15:52 [PATCH] board: logicpd: Remove OMAP3 SOM support Adam Ford
@ 2026-09-30 17:17 ` Tom Rini
0 siblings, 0 replies; 2+ messages in thread
From: Tom Rini @ 2026-09-30 17:17 UTC (permalink / raw)
To: u-boot, Adam Ford; +Cc: Ilias Apalodimas, Peng Fan, Jaehoon Chung
On Sun, 13 Sep 2026 10:52:05 -0500, Adam Ford wrote:
> Remove the Logic PD OMAP35xx/DM37xx SOM-LV and Torpedo board support
> along with its defconfigs, config header, U-Boot device tree overlays,
> Kconfig target and the board specific MMC PBIAS quirk.
>
>
Applied to u-boot/main, thanks!
[1/1] board: logicpd: Remove OMAP3 SOM support
commit: 036a1201cf5580ed8a42ba26884cf432bf92e3e3
--
Tom
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-09-30 17:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-13 15:52 [PATCH] board: logicpd: Remove OMAP3 SOM support Adam Ford
2026-09-30 17:17 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.