From: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
To: Bryan O'Donoghue <bod@kernel.org>,
Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Bryan O'Donoghue <bod@kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
"Joerg Roedel (AMD)" <joro@8bytes.org>,
Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Stanimir Varbanov <stanimir.k.varbanov@gmail.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
iommu@lists.linux.dev, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Vishnu Reddy <busanna.reddy@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH v11 8/9] arm64: dts: qcom: glymur: Add iris video node
Date: Thu, 17 Sep 2026 10:30:27 +0530 [thread overview]
Message-ID: <20260917-glymur-v11-8-e0c8bc914742@oss.qualcomm.com> (raw)
In-Reply-To: <20260917-glymur-v11-0-e0c8bc914742@oss.qualcomm.com>
Add iris video codec to glymur SoC, which comes with significantly
different powering up sequence than previous platforms, thus different
clocks and resets.
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/glymur.dtsi | 120 +++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 7dedace8c3c4..cea1d22bba4b 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -5744,6 +5744,126 @@ mdss_dp3_out: endpoint {
};
};
+ iris: video-codec@aa00000 {
+ compatible = "qcom,glymur-iris";
+ reg = <0x0 0x0aa00000 0x0 0xf0000>;
+
+ clocks = <&gcc GCC_VIDEO_AXI0C_CLK>,
+ <&videocc VIDEO_CC_MVS0C_CLK>,
+ <&videocc VIDEO_CC_MVS0_CLK>,
+ <&gcc GCC_VIDEO_AXI0_CLK>,
+ <&videocc VIDEO_CC_MVS0C_FREERUN_CLK>,
+ <&videocc VIDEO_CC_MVS0_FREERUN_CLK>,
+ <&gcc GCC_VIDEO_AXI1_CLK>,
+ <&videocc VIDEO_CC_MVS1_CLK>,
+ <&videocc VIDEO_CC_MVS1_FREERUN_CLK>;
+ clock-names = "core_iface",
+ "core",
+ "vcodec0_core",
+ "vcodec0_iface",
+ "core_freerun",
+ "vcodec0_core_freerun",
+ "vcodec1_iface",
+ "vcodec1_core",
+ "vcodec1_core_freerun";
+
+ dma-coherent;
+
+ interconnects = <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cpu-cfg",
+ "video-mem";
+
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+ memory-region = <&video_mem>;
+
+ operating-points-v2 = <&iris_opp_table>;
+
+ power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+ <&videocc VIDEO_CC_MVS0_GDSC>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_MMCX>,
+ <&videocc VIDEO_CC_MVS1_GDSC>;
+ power-domain-names = "venus",
+ "vcodec0",
+ "mxc",
+ "mmcx",
+ "vcodec1";
+
+ resets = <&gcc GCC_VIDEO_AXI0C_CLK_ARES>,
+ <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+ <&videocc VIDEO_CC_MVS0C_FREERUN_CLK_ARES>,
+ <&videocc VIDEO_CC_MVS0_FREERUN_CLK_ARES>,
+ <&gcc GCC_VIDEO_AXI1_CLK_ARES>,
+ <&videocc VIDEO_CC_MVS1_FREERUN_CLK_ARES>;
+ reset-names = "core_bus",
+ "vcodec0_bus",
+ "core",
+ "vcodec0_core",
+ "vcodec1_bus",
+ "vcodec1_core";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges = <0x0 0x0 0x0 0xffe00000>;
+
+ status = "disabled";
+
+ non-pixel {
+ iommus = <&apps_smmu 0x1940 0x0>,
+ <&apps_smmu 0x1944 0x0>,
+ <&apps_smmu 0x19e0 0x0>;
+ iommu-ranges = <0x25800000 0xda600000>;
+ };
+
+ pixel {
+ iommus = <&apps_smmu 0x1943 0x0>;
+ };
+
+ iris_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-240000000 {
+ opp-hz = /bits/ 64 <240000000 240000000 360000000>;
+ required-opps = <&rpmhpd_opp_svs>,
+ <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-338000000 {
+ opp-hz = /bits/ 64 <338000000 338000000 507000000>;
+ required-opps = <&rpmhpd_opp_svs>,
+ <&rpmhpd_opp_svs>;
+ };
+
+ opp-366000000 {
+ opp-hz = /bits/ 64 <366000000 366000000 549000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-444000000 {
+ opp-hz = /bits/ 64 <444000000 444000000 666000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_nom>;
+ };
+
+ opp-533333334 {
+ opp-hz = /bits/ 64 <533333334 533333334 800000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_turbo>;
+ };
+
+ opp-655000000 {
+ opp-hz = /bits/ 64 <655000000 655000000 982000000>;
+ required-opps = <&rpmhpd_opp_nom>,
+ <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
videocc: clock-controller@aaf0000 {
compatible = "qcom,glymur-videocc";
reg = <0x0 0x0aaf0000 0x0 0x10000>;
--
2.34.1
next prev parent reply other threads:[~2026-09-17 5:02 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-17 5:00 [PATCH v11 0/9] media: iris: Add support for glymur platform Vishnu Reddy
2026-09-17 5:00 ` [PATCH v11 1/9] dt-bindings: media: qcom,glymur-iris: Add glymur video codec Vishnu Reddy
2026-09-22 12:59 ` Dmitry Baryshkov
2026-09-23 5:41 ` Vishnu Reddy
2026-09-17 5:00 ` [PATCH v11 2/9] media: iris: Enable Secure PAS support with IOMMU managed by Linux Vishnu Reddy
2026-09-17 5:00 ` [PATCH v11 3/9] media: iris: Replace enum-indexed clock and power domain tables with per-block structures Vishnu Reddy
2026-09-22 13:03 ` Dmitry Baryshkov
2026-09-22 18:09 ` Vikash Garodia
2026-09-17 5:00 ` [PATCH v11 4/9] media: iris: Add power sequence for glymur Vishnu Reddy
2026-09-22 13:02 ` Dmitry Baryshkov
2026-09-17 5:00 ` [PATCH v11 5/9] media: iris: Handle CPU_CS_SCIACMDARG3 register write via program bootup registers hook Vishnu Reddy
2026-09-22 18:10 ` Vikash Garodia
2026-09-17 5:00 ` [PATCH v11 6/9] media: iris: Add support to select core for dual core platforms Vishnu Reddy
2026-09-22 18:11 ` Vikash Garodia
2026-09-17 5:00 ` [PATCH v11 7/9] media: iris: Add platform data for glymur Vishnu Reddy
2026-09-17 5:00 ` Vishnu Reddy [this message]
2026-09-17 5:00 ` [PATCH v11 9/9] arm64: dts: qcom: glymur-crd: Enable iris video codec node Vishnu Reddy
2026-09-17 7:09 ` [PATCH v11 0/9] media: iris: Add support for glymur platform Krzysztof Kozlowski
2026-09-17 7:11 ` Krzysztof Kozlowski
2026-09-18 6:57 ` Vishnu Reddy
2026-09-18 7:00 ` Krzysztof Kozlowski
2026-09-22 12:45 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260917-glymur-v11-8-e0c8bc914742@oss.qualcomm.com \
--to=busanna.reddy@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=abhinav.kumar@linux.dev \
--cc=andersson@kernel.org \
--cc=bod@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=stanimir.k.varbanov@gmail.com \
--cc=vikash.garodia@oss.qualcomm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.