[PATCH] drm/udl: reject short USB EDID control transfers and fix URB init cleanup

[PATCH] drm/udl: reject short USB EDID control transfers and fix URB init cleanup

[Hui Peng]

In drivers/gpu/drm/udl/ (udl_drv.c, udl_edid.c), check that
usb_control_msg() returns the full 2-byte response in
udl_read_edid_block() before copying read_buff[1], and clean up
allocated URBs if udl_Driver initialization fails.

Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Assisted-by: LLM
Signed-off-by: Hui Peng <benquike@gmail.com>
---
diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
index 1922988625eb..239a6983f49f 100644
--- a/drivers/gpu/drm/udl/udl_drv.c
+++ b/drivers/gpu/drm/udl/udl_drv.c
@@ -97,8 +97,10 @@ static int udl_usb_probe(struct usb_interface *interface,
 		return PTR_ERR(udl);
 
 	r = drm_dev_register(&udl->drm, 0);
-	if (r)
+	if (r) {
+		udl_drop_usb(udl);
 		return r;
+	}
 
 	DRM_INFO("Initialized udl on minor %d\n", udl->drm.primary->index);
 
diff --git a/drivers/gpu/drm/udl/udl_edid.c b/drivers/gpu/drm/udl/udl_edid.c
index af4cff2a7c51..b7c462436573 100644
--- a/drivers/gpu/drm/udl/udl_edid.c
+++ b/drivers/gpu/drm/udl/udl_edid.c
@@ -36,7 +36,7 @@ static int udl_read_edid_block(void *data, u8 *buf, unsigned int block, size_t l
 		if (ret < 0) {
 			drm_err(dev, "Read EDID byte %zu failed err %x\n", i, ret);
 			goto err_drm_dev_exit;
-		} else if (ret < 1) {
+		} else if (ret != 2) {
 			ret = -EIO;
 			drm_err(dev, "Read EDID byte %zu failed\n", i);
 			goto err_drm_dev_exit;

Re: [PATCH] drm/udl: reject short USB EDID control transfers and fix URB init cleanup

[Jani Nikula]

On Sat, 19 Sep 2026, Hui Peng <benquike@gmail.com> wrote:
> In drivers/gpu/drm/udl/ (udl_drv.c, udl_edid.c), check that
> usb_control_msg() returns the full 2-byte response in
> udl_read_edid_block() before copying read_buff[1], and clean up
> allocated URBs if udl_Driver initialization fails.

One change per patch please.

>
> Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
> Assisted-by: LLM
> Signed-off-by: Hui Peng <benquike@gmail.com>
> ---
> diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
> index 1922988625eb..239a6983f49f 100644
> --- a/drivers/gpu/drm/udl/udl_drv.c
> +++ b/drivers/gpu/drm/udl/udl_drv.c
> @@ -97,8 +97,10 @@ static int udl_usb_probe(struct usb_interface *interface,
>  		return PTR_ERR(udl);
>  
>  	r = drm_dev_register(&udl->drm, 0);
> -	if (r)
> +	if (r) {
> +		udl_drop_usb(udl);
>  		return r;
> +	}
>  
>  	DRM_INFO("Initialized udl on minor %d\n", udl->drm.primary->index);
>  
> diff --git a/drivers/gpu/drm/udl/udl_edid.c b/drivers/gpu/drm/udl/udl_edid.c
> index af4cff2a7c51..b7c462436573 100644
> --- a/drivers/gpu/drm/udl/udl_edid.c
> +++ b/drivers/gpu/drm/udl/udl_edid.c
> @@ -36,7 +36,7 @@ static int udl_read_edid_block(void *data, u8 *buf, unsigned int block, size_t l
>  		if (ret < 0) {
>  			drm_err(dev, "Read EDID byte %zu failed err %x\n", i, ret);
>  			goto err_drm_dev_exit;
> -		} else if (ret < 1) {
> +		} else if (ret != 2) {
>  			ret = -EIO;
>  			drm_err(dev, "Read EDID byte %zu failed\n", i);
>  			goto err_drm_dev_exit;

-- 
Jani Nikula, Intel

[PATCH v2 0/2] drm/udl: fix EDID short transfer check and probe USB cleanup

[Hui Peng]

This series fixes two error-handling issues in the udl DRM driver:

1. Reject short USB control transfers (ret != 2) in udl_read_edid_block()
   with -EIO so uninitialized or stale bytes from read_buff[1] are not
   copied into the EDID buffer.
2. Call udl_drop_usb(udl) when drm_dev_register() fails in udl_usb_probe()
   so the allocated URB list and DMA buffers are released.

Changes in v2:
- Split into two separate patches, as requested by Jani Nikula.

Hui Peng (2):
  drm/udl: reject short USB control transfers in udl_read_edid_block()
  drm/udl: clean up USB resources if drm_dev_register() fails

 drivers/gpu/drm/udl/udl_drv.c  | 4 +++-
 drivers/gpu/drm/udl/udl_edid.c | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)

-- 
2.55.0.1082.g2b9226bbc0-goog

[PATCH v2 1/2] drm/udl: reject short USB control transfers in udl_read_edid_block()

[Hui Peng]

In udl_read_edid_block(), usb_control_msg() requests 2 bytes into
read_buff for each EDID byte, and read_buff[1] is stored into buf[i].
Currently the short-transfer check tests ret < 1 instead of ret != 2, so
if a short USB control transfer returns 1 byte, read_buff[1] is not
written by usb_control_msg() and retains the previous iteration's byte (or
uninitialized kmalloc(2) memory on the first iteration), which is then
copied into buf[i].

Change the check from ret < 1 to ret != 2 so any short USB control
transfer fails with -EIO.

Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd and raw-gadget
emulating a DisplayLink UDL USB device: on the unfixed kernel, when
usb_control_msg() returned 1 byte for an EDID read (short transfer),
udl_read_edid_block() accepted ret = 1 and stored stale read_buff[1]
data into the EDID buffer; whereas with this fix applied, ret != 2
correctly fails with -EIO and prevents EDID buffer corruption.

Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Hui Peng <benquike@gmail.com>
---
Changes in v2:
- Split out as patch 1/2 as requested by Jani Nikula.
- Added testing details in QEMU on short USB EDID control transfers.

 drivers/gpu/drm/udl/udl_edid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/udl/udl_edid.c b/drivers/gpu/drm/udl/udl_edid.c
index af4cff2a7c51..b7c462436573 100644
--- a/drivers/gpu/drm/udl/udl_edid.c
+++ b/drivers/gpu/drm/udl/udl_edid.c
@@ -36,7 +36,7 @@ static int udl_read_edid_block(void *data, u8 *buf, unsigned int block, size_t l
 		if (ret < 0) {
 			drm_err(dev, "Read EDID byte %zu failed err %x\n", i, ret);
 			goto err_drm_dev_exit;
-		} else if (ret < 1) {
+		} else if (ret != 2) {
 			ret = -EIO;
 			drm_err(dev, "Read EDID byte %zu failed\n", i);
 			goto err_drm_dev_exit;
-- 
2.55.0.1082.g2b9226bbc0-goog

Re: [PATCH v2 1/2] drm/udl: reject short USB control transfers in udl_read_edid_block()

[Thomas Zimmermann]

Hi

Am 24.09.26 um 08:44 schrieb Hui Peng:
> In udl_read_edid_block(), usb_control_msg() requests 2 bytes into
> read_buff for each EDID byte, and read_buff[1] is stored into buf[i].
> Currently the short-transfer check tests ret < 1 instead of ret != 2, so
> if a short USB control transfer returns 1 byte, read_buff[1] is not
> written by usb_control_msg() and retains the previous iteration's byte (or
> uninitialized kmalloc(2) memory on the first iteration), which is then
> copied into buf[i].
>
> Change the check from ret < 1 to ret != 2 so any short USB control
> transfer fails with -EIO.
>
> Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd and raw-gadget
> emulating a DisplayLink UDL USB device: on the unfixed kernel, when
> usb_control_msg() returned 1 byte for an EDID read (short transfer),
> udl_read_edid_block() accepted ret = 1 and stored stale read_buff[1]
> data into the EDID buffer; whereas with this fix applied, ret != 2
> correctly fails with -EIO and prevents EDID buffer corruption.
>
> Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
> Cc: stable@vger.kernel.org
> Assisted-by: LLM
> Signed-off-by: Hui Peng <benquike@gmail.com>
> ---
> Changes in v2:
> - Split out as patch 1/2 as requested by Jani Nikula.
> - Added testing details in QEMU on short USB EDID control transfers.
>
>   drivers/gpu/drm/udl/udl_edid.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/udl/udl_edid.c b/drivers/gpu/drm/udl/udl_edid.c
> index af4cff2a7c51..b7c462436573 100644
> --- a/drivers/gpu/drm/udl/udl_edid.c
> +++ b/drivers/gpu/drm/udl/udl_edid.c
> @@ -36,7 +36,7 @@ static int udl_read_edid_block(void *data, u8 *buf, unsigned int block, size_t l
>   		if (ret < 0) {
>   			drm_err(dev, "Read EDID byte %zu failed err %x\n", i, ret);
>   			goto err_drm_dev_exit;
> -		} else if (ret < 1) {
> +		} else if (ret != 2) {

Please test for (ret < 2) instead. It makes the test a little less 
dependent on the earlier calls.

Best regards
Thomas

>   			ret = -EIO;
>   			drm_err(dev, "Read EDID byte %zu failed\n", i);
>   			goto err_drm_dev_exit;

-- 
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Stefan Gaiser, Jochen Jaser, Abhinav Puri, (HRB 36809, AG Nürnberg)

[PATCH v3 1/2] drm/udl: reject short USB control transfers in udl_read_edid_block()

[Hui Peng]

In udl_read_edid_block(), usb_control_msg() requests 2 bytes into
read_buff for each EDID byte, and read_buff[1] is stored into buf[i].
Currently the short-transfer check tests ret < 1 instead of ret < 2, so
if a short USB control transfer returns 1 byte, read_buff[1] is not
written by usb_control_msg() and retains the previous iteration's byte (or
uninitialized kmalloc(2) memory on the first iteration), which is then
copied into buf[i].

Change the check from ret < 1 to ret < 2 so any short USB control
transfer fails with -EIO.

Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd and raw-gadget
emulating a DisplayLink UDL USB device: on the unfixed kernel, when
usb_control_msg() returned 1 byte for an EDID read (short transfer),
udl_read_edid_block() accepted ret = 1 and stored stale read_buff[1]
data into the EDID buffer; whereas with this fix applied, ret < 2
correctly fails with -EIO and prevents EDID buffer corruption.

Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Assisted-by: LLM
Signed-off-by: Hui Peng <benquike@gmail.com>
---
Changes in v3:
- Change (ret != 2) to (ret < 2) in udl_read_edid_block(), as requested
  by Thomas Zimmermann.

Changes in v2:
- Split out as patch 1/2 as requested by Jani Nikula.
- Added testing details in QEMU on short USB EDID control transfers.

 drivers/gpu/drm/udl/udl_edid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/udl/udl_edid.c b/drivers/gpu/drm/udl/udl_edid.c
index af4cff2a7c51..2120e363b6eb 100644
--- a/drivers/gpu/drm/udl/udl_edid.c
+++ b/drivers/gpu/drm/udl/udl_edid.c
@@ -36,7 +36,7 @@ static int udl_read_edid_block(void *data, u8 *buf, unsigned int block, size_t l
 		if (ret < 0) {
 			drm_err(dev, "Read EDID byte %zu failed err %x\n", i, ret);
 			goto err_drm_dev_exit;
-		} else if (ret < 1) {
+		} else if (ret < 2) {
 			ret = -EIO;
 			drm_err(dev, "Read EDID byte %zu failed\n", i);
 			goto err_drm_dev_exit;
-- 
2.55.0.1082.g2b9226bbc0-goog

Re: [PATCH v3 1/2] drm/udl: reject short USB control transfers in udl_read_edid_block()

[Thomas Zimmermann]

Hi

Am 24.09.26 um 09:30 schrieb Hui Peng:
> In udl_read_edid_block(), usb_control_msg() requests 2 bytes into
> read_buff for each EDID byte, and read_buff[1] is stored into buf[i].
> Currently the short-transfer check tests ret < 1 instead of ret < 2, so
> if a short USB control transfer returns 1 byte, read_buff[1] is not
> written by usb_control_msg() and retains the previous iteration's byte (or
> uninitialized kmalloc(2) memory on the first iteration), which is then
> copied into buf[i].
>
> Change the check from ret < 1 to ret < 2 so any short USB control
> transfer fails with -EIO.
>
> Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd and raw-gadget
> emulating a DisplayLink UDL USB device: on the unfixed kernel, when
> usb_control_msg() returned 1 byte for an EDID read (short transfer),
> udl_read_edid_block() accepted ret = 1 and stored stale read_buff[1]
> data into the EDID buffer; whereas with this fix applied, ret < 2
> correctly fails with -EIO and prevents EDID buffer corruption.
>
> Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
> Cc: stable@vger.kernel.org
> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
> Assisted-by: LLM
> Signed-off-by: Hui Peng <benquike@gmail.com>

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>

Thanks for the fix.

Best regards
Thomas

> ---
> Changes in v3:
> - Change (ret != 2) to (ret < 2) in udl_read_edid_block(), as requested
>    by Thomas Zimmermann.
>
> Changes in v2:
> - Split out as patch 1/2 as requested by Jani Nikula.
> - Added testing details in QEMU on short USB EDID control transfers.
>
>   drivers/gpu/drm/udl/udl_edid.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/udl/udl_edid.c b/drivers/gpu/drm/udl/udl_edid.c
> index af4cff2a7c51..2120e363b6eb 100644
> --- a/drivers/gpu/drm/udl/udl_edid.c
> +++ b/drivers/gpu/drm/udl/udl_edid.c
> @@ -36,7 +36,7 @@ static int udl_read_edid_block(void *data, u8 *buf, unsigned int block, size_t l
>   		if (ret < 0) {
>   			drm_err(dev, "Read EDID byte %zu failed err %x\n", i, ret);
>   			goto err_drm_dev_exit;
> -		} else if (ret < 1) {
> +		} else if (ret < 2) {
>   			ret = -EIO;
>   			drm_err(dev, "Read EDID byte %zu failed\n", i);
>   			goto err_drm_dev_exit;

-- 
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Stefan Gaiser, Jochen Jaser, Abhinav Puri, (HRB 36809, AG Nürnberg)

[PATCH v2 2/2] drm/udl: clean up USB resources if drm_dev_register() fails

[Hui Peng]

In udl_usb_probe(), udl_driver_create() calls udl_init(udl), which
allocates USB URBs and DMA buffers via udl_alloc_urb_list() that are
normally freed by udl_drop_usb() in udl_usb_disconnect(). If
drm_dev_register() fails in udl_usb_probe(), udl_usb_probe() returns
without calling udl_drop_usb(udl), leaking the allocated URB list and DMA
buffers because udl_usb_disconnect() is not called when probe fails.

Call udl_drop_usb(udl) when drm_dev_register() fails in udl_usb_probe().

Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd by simulating
a registration error in drm_dev_register(): on the unfixed kernel,
udl_usb_probe() returned an error without calling udl_drop_usb(udl),
leaking 8 allocated URBs and DMA buffers; whereas with this fix applied,
udl_drop_usb(udl) is called on error, freeing all URB and DMA
allocations.

Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Hui Peng <benquike@gmail.com>
---
Changes in v2:
- Split out as patch 2/2 as requested by Jani Nikula.
- Added testing details in QEMU on drm_dev_register() failure cleanup.

 drivers/gpu/drm/udl/udl_drv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
index 1922988625eb..239a6983f49f 100644
--- a/drivers/gpu/drm/udl/udl_drv.c
+++ b/drivers/gpu/drm/udl/udl_drv.c
@@ -97,8 +97,10 @@ static int udl_usb_probe(struct usb_interface *interface,
 		return PTR_ERR(udl);
 
 	r = drm_dev_register(&udl->drm, 0);
-	if (r)
+	if (r) {
+		udl_drop_usb(udl);
 		return r;
+	}
 
 	DRM_INFO("Initialized udl on minor %d\n", udl->drm.primary->index);
 

Re: [PATCH v2 2/2] drm/udl: clean up USB resources if drm_dev_register() fails

[Thomas Zimmermann]

Am 24.09.26 um 08:44 schrieb Hui Peng:
> In udl_usb_probe(), udl_driver_create() calls udl_init(udl), which
> allocates USB URBs and DMA buffers via udl_alloc_urb_list() that are
> normally freed by udl_drop_usb() in udl_usb_disconnect(). If
> drm_dev_register() fails in udl_usb_probe(), udl_usb_probe() returns
> without calling udl_drop_usb(udl), leaking the allocated URB list and DMA
> buffers because udl_usb_disconnect() is not called when probe fails.
>
> Call udl_drop_usb(udl) when drm_dev_register() fails in udl_usb_probe().
>
> Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd by simulating
> a registration error in drm_dev_register(): on the unfixed kernel,
> udl_usb_probe() returned an error without calling udl_drop_usb(udl),
> leaking 8 allocated URBs and DMA buffers; whereas with this fix applied,
> udl_drop_usb(udl) is called on error, freeing all URB and DMA
> allocations.
>
> Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
> Cc: stable@vger.kernel.org
> Assisted-by: LLM
> Signed-off-by: Hui Peng <benquike@gmail.com>

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>

> ---
> Changes in v2:
> - Split out as patch 2/2 as requested by Jani Nikula.
> - Added testing details in QEMU on drm_dev_register() failure cleanup.
>
>   drivers/gpu/drm/udl/udl_drv.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
> index 1922988625eb..239a6983f49f 100644
> --- a/drivers/gpu/drm/udl/udl_drv.c
> +++ b/drivers/gpu/drm/udl/udl_drv.c
> @@ -97,8 +97,10 @@ static int udl_usb_probe(struct usb_interface *interface,
>   		return PTR_ERR(udl);
>   
>   	r = drm_dev_register(&udl->drm, 0);
> -	if (r)
> +	if (r) {
> +		udl_drop_usb(udl);
>   		return r;
> +	}
>   
>   	DRM_INFO("Initialized udl on minor %d\n", udl->drm.primary->index);
>   

-- 
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Stefan Gaiser, Jochen Jaser, Abhinav Puri, (HRB 36809, AG Nürnberg)

[PATCH v3 2/2] drm/udl: clean up USB resources if drm_dev_register() fails

[Hui Peng]

In udl_usb_probe(), udl_driver_create() calls udl_init(udl), which
allocates USB URBs and DMA buffers via udl_alloc_urb_list() that are
normally freed by udl_drop_usb() in udl_usb_disconnect(). If
drm_dev_register() fails in udl_usb_probe(), udl_usb_probe() returns
without calling udl_drop_usb(udl), leaking the allocated URB list and DMA
buffers because udl_usb_disconnect() is not called when probe fails.

Call udl_drop_usb(udl) when drm_dev_register() fails in udl_usb_probe().

Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd by simulating
a registration error in drm_dev_register(): on the unfixed kernel,
udl_usb_probe() returned an error without calling udl_drop_usb(udl),
leaking 8 allocated URBs and DMA buffers; whereas with this fix applied,
udl_drop_usb(udl) is called on error, freeing all URB and DMA
allocations.

Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Assisted-by: LLM
Signed-off-by: Hui Peng <benquike@gmail.com>
---
Changes in v3:
- Add Reviewed-by tag from Thomas Zimmermann.

Changes in v2:
- Split out as patch 2/2 as requested by Jani Nikula.
- Added testing details in QEMU on drm_dev_register() failure cleanup.

 drivers/gpu/drm/udl/udl_drv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
index 1922988625eb..239a6983f49f 100644
--- a/drivers/gpu/drm/udl/udl_drv.c
+++ b/drivers/gpu/drm/udl/udl_drv.c
@@ -97,8 +97,10 @@ static int udl_usb_probe(struct usb_interface *interface,
 		return PTR_ERR(udl);
 
 	r = drm_dev_register(&udl->drm, 0);
-	if (r)
+	if (r) {
+		udl_drop_usb(udl);
 		return r;
+	}
 
 	DRM_INFO("Initialized udl on minor %d\n", udl->drm.primary->index);

[PATCH v3 0/2] drm/udl: fix EDID short transfer check and probe USB cleanup

[Hui Peng]

This series fixes two error-handling issues in the udl DRM driver:

1. Reject short USB control transfers (ret < 2) in udl_read_edid_block()
   with -EIO so uninitialized or stale bytes from read_buff[1] are not
   copied into the EDID buffer.
2. Call udl_drop_usb(udl) when drm_dev_register() fails in udl_usb_probe()
   so the allocated URB list and DMA buffers are released.

Changes in v3:
- Change (ret != 2) to (ret < 2) in udl_read_edid_block(), as requested
  by Thomas Zimmermann.
- Add Reviewed-by tag from Thomas Zimmermann to both patches.

Changes in v2:
- Split into two separate patches, as requested by Jani Nikula.

Hui Peng (2):
  drm/udl: reject short USB control transfers in udl_read_edid_block()
  drm/udl: clean up USB resources if drm_dev_register() fails

 drivers/gpu/drm/udl/udl_drv.c  | 4 +++-
 drivers/gpu/drm/udl/udl_edid.c | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)