[PATCH v4 3/6] arm: dts: sunplus: add PWM, watchdog and MMC nodes to SP7021 DTSI

[Andrew Gaylard <ag@ffroot.co.za>]

Add device nodes for the peripherals that have upstream drivers:
- PWM controller
- Watchdog controller
- eMMC controller

Add a label to the gpio-leds node so board DTS files can override it.

Move the memory node from the DTS into the DTSI; this chip has the RAM
integrated and it's not possible to add external RAM.

Signed-off-by: Andrew Gaylard <ag@ffroot.co.za>
---
 .../dts/sunplus/sunplus-sp7021-demo-v3.dts    |  4 -
 arch/arm/boot/dts/sunplus/sunplus-sp7021.dtsi | 74 ++++++++-----------
 2 files changed, 32 insertions(+), 46 deletions(-)

diff --git a/arch/arm/boot/dts/sunplus/sunplus-sp7021-demo-v3.dts b/arch/arm/boot/dts/sunplus/sunplus-sp7021-demo-v3.dts
index d5c5ffc20565..d764fc1f946e 100644
--- a/arch/arm/boot/dts/sunplus/sunplus-sp7021-demo-v3.dts
+++ b/arch/arm/boot/dts/sunplus/sunplus-sp7021-demo-v3.dts
@@ -23,8 +23,4 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
 };
diff --git a/arch/arm/boot/dts/sunplus/sunplus-sp7021.dtsi b/arch/arm/boot/dts/sunplus/sunplus-sp7021.dtsi
index ae9bbe0320b8..9963501b6a41 100644
--- a/arch/arm/boot/dts/sunplus/sunplus-sp7021.dtsi
+++ b/arch/arm/boot/dts/sunplus/sunplus-sp7021.dtsi
@@ -17,6 +17,11 @@ / {
 	compatible = "sunplus,sp7021";
 	model = "Sunplus SP7021";
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512MB integrated */
+	};
+
 	clocks {
 		extclk: osc0 {
 			compatible = "fixed-clock";
@@ -84,50 +89,10 @@ pctl: pinctrl@100 {
 			clocks = <&clkc CLK_GPIO>;
 			resets = <&rstc RST_GPIO>;
 
-			emac_pins: pinmux-emac-pins {
-				sunplus,pins = <
-					SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
-					SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
-					SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
-					SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
-					SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
-					SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
-					SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
-					SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
-					SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
-					SPPCTL_IOPAD(45,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXER,0)
-					SPPCTL_IOPAD(59,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXEN,0)
-					SPPCTL_IOPAD(57,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD0,0)
-					SPPCTL_IOPAD(58,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD1,0)
-					SPPCTL_IOPAD(54,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_CRSDV,0)
-					SPPCTL_IOPAD(55,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD0,0)
-					SPPCTL_IOPAD(56,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD1,0)
-					SPPCTL_IOPAD(53,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXER,0)
-				>;
-				sunplus,zerofunc = <
-					MUXF_L2SW_LED_FLASH0
-					MUXF_L2SW_LED_FLASH1
-					MUXF_L2SW_LED_ON0
-					MUXF_L2SW_LED_ON1
-					MUXF_DAISY_MODE
-				>;
-			};
-
-			emmc_pins: pinmux-emmc-pins {
-				function = "CARD0_EMMC";
-				groups = "CARD0_EMMC";
-			};
-
 			leds_pins: pinmux-leds-pins {
 				sunplus,pins = < SPPCTL_IOPAD(0,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT) >;
 			};
 
-			sdcard_pins: pinmux-sdcard-pins {
-				function = "SD_CARD";
-				groups = "SD_CARD";
-				sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
-			};
-
 			spi0_pins: pinmux-spi0-pins {
 				sunplus,pins = <
 					SPPCTL_IOPAD(26,SPPCTL_PCTL_G_GPIO,0,0)
@@ -291,13 +256,38 @@ uart4: serial@8780 {
 			pinctrl-0 = <&uart4_pins>;
 			status = "disabled";
 		};
+
+		pwm: pwm@7a00 {
+			#pwm-cells = <2>;
+			compatible = "sunplus,sp7021-pwm";
+			reg = <0x7a00 0x80>;
+			clocks = <&clkc CLK_DISP_PWM>;
+			status = "disabled";
+		};
+
+		wdt: watchdog@630 {
+			compatible = "sunplus,sp7021-wdt";
+			reg = <0x630 0x08>, <0x274 0x04>;
+			clocks = <&clkc CLK_STC0>;
+			resets = <&rstc RST_STC0>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@3b00 {
+			compatible = "sunplus,sp7021-mmc";
+			reg = <0x3b00 0x180>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_CARD_CTL0>;
+			resets = <&rstc RST_CARD_CTL0>;
+			status = "disabled";
+		};
 	};
 
-	leds {
+	leds: leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&leds_pins>;
-		system-led {
+		led-0 {
 			label = "system-led";
 			gpios = <&pctl 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-- 
2.53.0