[PATCH v4 5/6] arm: dts: sunplus: add Tibbo LTPP3G2 board

[Andrew Gaylard <ag@ffroot.co.za>]

Add a DTS for the Tibbo LTPP3G2 board, which uses the Sunplus SP7021
SoC. The initial DTS was provided by Sunplus Technology Co. and has
been adapted for upstream with permission.

The board features eMMC, SPI, a bit-banged I2C EEPROM (Atmel 24C16),
PWM output to a buzzer, a watchdog, RTC, and two GPIO LEDs (heartbeat
and MMC activity).

Signed-off-by: Andrew Gaylard <ag@ffroot.co.za>
---
 MAINTAINERS                                   |   6 +
 arch/arm/boot/dts/sunplus/Makefile            |   5 +-
 .../dts/sunplus/sunplus-sp7021-ltpp3g2.dts    | 193 ++++++++++++++++++
 3 files changed, 201 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/sunplus/sunplus-sp7021-ltpp3g2.dts

diff --git a/MAINTAINERS b/MAINTAINERS
index 6e50747a621c..313107bea748 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3737,6 +3737,12 @@ F:	drivers/reset/reset-sunplus.c
 F:	include/dt-bindings/clock/sunplus,sp7021-clkc.h
 F:	include/dt-bindings/reset/sunplus,sp7021-reset.h
 
+ARM/TIBBO LTPP3G2 BOARD
+M:	Andrew Gaylard <ag@ffroot.co.za>
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	arch/arm/boot/dts/sunplus/sunplus-sp7021-ltpp3g2.dts
+
 ARM/Synaptics SoC support
 M:	Jisheng Zhang <jszhang@kernel.org>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
diff --git a/arch/arm/boot/dts/sunplus/Makefile b/arch/arm/boot/dts/sunplus/Makefile
index 868f2ea0c127..25ba2e530c35 100644
--- a/arch/arm/boot/dts/sunplus/Makefile
+++ b/arch/arm/boot/dts/sunplus/Makefile
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_SOC_SP7021) += \
-	sunplus-sp7021-demo-v3.dtb
-dtb-$(CONFIG_SOC_SP7021) += \
-	sunplus-sp7021-demo-v3.dtb
+	sunplus-sp7021-demo-v3.dtb \
+	sunplus-sp7021-ltpp3g2.dtb
diff --git a/arch/arm/boot/dts/sunplus/sunplus-sp7021-ltpp3g2.dts b/arch/arm/boot/dts/sunplus/sunplus-sp7021-ltpp3g2.dts
new file mode 100644
index 000000000000..2d321c41067c
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus/sunplus-sp7021-ltpp3g2.dts
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Tibbo LTPP board G2
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+/dts-v1/;
+
+#include "sunplus-sp7021-achip.dtsi"
+
+/ {
+	compatible = "tibbo,ltpp3g2", "sunplus,sp7021";
+	model = "Tibbo LTPP3G2";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c_tps: i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pctl 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&pctl 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2ctps>;
+		eeprom: eeprom@50 {
+			compatible = "atmel,24c16";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+};
+
+&leds {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&gpio_leds_pins>;
+	pinctrl-1 = <&leds_s0_slp>;
+	led-0 {
+		label = "system-led";
+		gpios = <&pctl 6 GPIO_ACTIVE_HIGH>;
+		default-state = "off";
+		linux,default-trigger = "heartbeat";
+	};
+	led-1 {
+		label = "SG";
+		gpios = <&pctl 7 GPIO_ACTIVE_HIGH>;
+		linux,default-trigger = "mmc0";
+		default-state = "off";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_pwm>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart1>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart3>;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_btuart &pins_bt_reset>;
+	status = "disabled";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	max-frequency = <52000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-3_3v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&pctl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_gpio_nobinded>;
+
+	emmc_pins: pinmux-emmc-pins {
+		function = "CARD0_EMMC";
+		groups = "CARD0_EMMC";
+	};
+
+	pins_pwm: pinmux-pwm-pins {
+		sunplus,pins = <
+			SPPCTL_IOPAD(48, SPPCTL_PCTL_G_PMUX, MUXF_PWM0, 0)
+		>;
+	};
+
+	pins_gpio_nobinded: pinmux-gpio-nobinded-pins {
+		sunplus,pins = <
+			SPPCTL_IOPAD(30, SPPCTL_PCTL_G_GPIO, 0, 0)   /* was L2SW_LED_FLASH1 */
+			SPPCTL_IOPAD(39, SPPCTL_PCTL_G_GPIO, 0, 0)   /* was L2SW_LED_ON1  */
+		>;
+	};
+
+	pins_i2ctps: pinmux-i2c-pins {
+		sunplus,pins = <
+			SPPCTL_IOPAD(1, SPPCTL_PCTL_G_GPIO, 0,
+				     SPPCTL_PCTL_L_OU1 | SPPCTL_PCTL_L_ODR)
+			SPPCTL_IOPAD(2, SPPCTL_PCTL_G_GPIO, 0,
+				     SPPCTL_PCTL_L_OU1 | SPPCTL_PCTL_L_ODR)
+		>;
+	};
+
+	gpio_leds_pins: pinmux-gpio-leds-pins {
+		sunplus,pins = <
+			SPPCTL_IOPAD(6, SPPCTL_PCTL_G_GPIO, 0, SPPCTL_PCTL_L_OUT)
+			SPPCTL_IOPAD(7, SPPCTL_PCTL_G_GPIO, 0, SPPCTL_PCTL_L_OUT)
+		>;
+	};
+
+	leds_s0_slp: pinmux-user-leds-s0-slp-pins {
+		sunplus,pins = <
+			SPPCTL_IOPAD(6, SPPCTL_PCTL_G_GPIO, 0, 0)
+			SPPCTL_IOPAD(7, SPPCTL_PCTL_G_GPIO, 0, 0)
+		>;
+	};
+
+	pins_uart1: pinmux-uart1-pins {
+		sunplus,pins = <
+			SPPCTL_IOPAD(8, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+			SPPCTL_IOPAD(9, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+			SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0)
+			SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0)
+		>;
+	};
+
+	pins_uart2: pinmux-uart2-pins {
+		sunplus,pins = <
+			SPPCTL_IOPAD(12, SPPCTL_PCTL_G_PMUX, MUXF_UA2_TX, 0)
+			SPPCTL_IOPAD(13, SPPCTL_PCTL_G_PMUX, MUXF_UA2_RX, 0)
+			SPPCTL_IOPAD(14, SPPCTL_PCTL_G_PMUX, MUXF_UA2_RTS, 0)
+			SPPCTL_IOPAD(15, SPPCTL_PCTL_G_PMUX, MUXF_UA2_CTS, 0)
+		>;
+	};
+
+	pins_uart3: pinmux-uart3-pins {
+		sunplus,pins = <
+			SPPCTL_IOPAD(16, SPPCTL_PCTL_G_PMUX, MUXF_UA3_TX, 0)
+			SPPCTL_IOPAD(17, SPPCTL_PCTL_G_PMUX, MUXF_UA3_RX, 0)
+			SPPCTL_IOPAD(18, SPPCTL_PCTL_G_PMUX, MUXF_UA3_RTS, 0)
+			SPPCTL_IOPAD(19, SPPCTL_PCTL_G_PMUX, MUXF_UA3_CTS, 0)
+		>;
+	};
+
+	/* AP6256 Bluetooth */
+	pins_btuart: pinmux-btuart-pins {
+		sunplus,pins = <
+			SPPCTL_IOPAD(40, SPPCTL_PCTL_G_PMUX, MUXF_UA4_RX, 0)
+			SPPCTL_IOPAD(41, SPPCTL_PCTL_G_PMUX, MUXF_UA4_TX, 0)
+			SPPCTL_IOPAD(56, SPPCTL_PCTL_G_PMUX, MUXF_UA4_RTS, 0)
+			SPPCTL_IOPAD(49, SPPCTL_PCTL_G_PMUX, MUXF_UA4_CTS, 0)
+		>;
+	};
+
+	pins_bt_reset: pinmux-bt-reset-pins {
+		sunplus,pins = < SPPCTL_IOPAD(82, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+	};
+
+};
-- 
2.53.0