Re: [PATCH v2 03/11] drm/panel: s6e3ha8: Really assert reset on the failure

[Petr Vorel <petr.vorel@gmail.com>]

Hi all,

LGTM.
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>

Kind regards,
Petr

> Due to incorrect implementation 0 == asserted, thus when driver fails it
> needs to assert reset.

> Minimal fix for stable; the polarity convention is corrected properly
> later in this series.

> Fixes: 779679d3c1640 ("drm/panel: Add support for S6E3HA8 panel driver")
> Cc: stable@vger.kernel.org
> Assisted-by: LLM
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
> index 078523df48860..835121b322f4a 100644
> --- a/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
> @@ -179,17 +179,17 @@ static int s6e3ha8_amb577px01_wqhd_prepare(struct drm_panel *panel)
>  	ret = regulator_bulk_enable(ARRAY_SIZE(s6e3ha8_supplies), priv->supplies);
>  	if (ret < 0)
>  		return ret;
>  	mipi_dsi_msleep(&ctx, 120);
>  	s6e3ha8_amb577px01_wqhd_reset(priv);

>  	ret = s6e3ha8_amb577px01_wqhd_on(priv);
>  	if (ret < 0) {
> -		gpiod_set_value_cansleep(priv->reset_gpio, 1);
> +		gpiod_set_value_cansleep(priv->reset_gpio, 0);
>  		goto err;
>  	}

>  	drm_dsc_pps_payload_pack(&pps, &priv->dsc);

>  	samsung_dsi_test_key_on_lvl1(&ctx);
>  	mipi_dsi_picture_parameter_set_multi(&ctx, &pps);
>  	samsung_dsi_test_key_off_lvl1(&ctx);