From: Aaron Kling <webgeek1234@gmail.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Aaron Kling <webgeek1234@gmail.com>
Subject: [PATCH v2 3/4] drm/panel: visionox-vtdr6130: Modularize panel config
Date: Fri, 25 Sep 2026 02:08:21 -0500 [thread overview]
Message-ID: <20260925-rp6-panel-v2-3-19c425e523de@gmail.com> (raw)
In-Reply-To: <20260925-rp6-panel-v2-0-19c425e523de@gmail.com>
The vtdr6130 is a DDIC, a common chip that is used by multiple panels.
Prepare the driver for more panels.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
drivers/gpu/drm/panel/panel-visionox-vtdr6130.c | 91 +++++++++++++++++--------
1 file changed, 61 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
index b66d6c7128c75..278f5acc2d661 100644
--- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
+++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
@@ -19,11 +19,24 @@
struct visionox_vtdr6130 {
struct drm_panel panel;
- struct drm_dsc_config dsc;
struct mipi_dsi_device *dsi;
struct gpio_desc *reset_gpio;
struct regulator_bulk_data *supplies;
enum drm_panel_orientation orientation;
+ struct visionox_vtdr6130_desc *desc;
+};
+
+struct visionox_vtdr6130_desc {
+ unsigned int bpc;
+ unsigned int lanes;
+ unsigned long mode_flags;
+ enum mipi_dsi_pixel_format format;
+
+ const struct drm_display_mode *modes;
+ unsigned int num_modes;
+ int (*init_sequence)(struct visionox_vtdr6130 *ctx);
+
+ struct drm_dsc_config dsc;
};
static const struct regulator_bulk_data visionox_vtdr6130_supplies[] = {
@@ -162,7 +175,7 @@ static int visionox_vtdr6130_prepare(struct drm_panel *panel)
visionox_vtdr6130_reset(ctx);
- ret = visionox_vtdr6130_on(ctx);
+ ret = ctx->desc->init_sequence(ctx);
if (ret < 0) {
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(visionox_vtdr6130_supplies),
@@ -187,26 +200,50 @@ static int visionox_vtdr6130_unprepare(struct drm_panel *panel)
return 0;
}
-static const struct drm_display_mode visionox_vtdr6130_mode = {
- .clock = (1080 + 20 + 2 + 20) * (2400 + 20 + 2 + 18) * 144 / 1000,
- .hdisplay = 1080,
- .hsync_start = 1080 + 20,
- .hsync_end = 1080 + 20 + 2,
- .htotal = 1080 + 20 + 2 + 20,
- .vdisplay = 2400,
- .vsync_start = 2400 + 20,
- .vsync_end = 2400 + 20 + 2,
- .vtotal = 2400 + 20 + 2 + 18,
- .width_mm = 71,
- .height_mm = 157,
+static const struct drm_display_mode visionox_vtdr6130_modes[] = {
+ {
+ .clock = (1080 + 20 + 2 + 20) * (2400 + 20 + 2 + 18) * 144 / 1000,
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 20,
+ .hsync_end = 1080 + 20 + 2,
+ .htotal = 1080 + 20 + 2 + 20,
+ .vdisplay = 2400,
+ .vsync_start = 2400 + 20,
+ .vsync_end = 2400 + 20 + 2,
+ .vtotal = 2400 + 20 + 2 + 18,
+ .width_mm = 71,
+ .height_mm = 157,
+ },
+};
+
+static struct visionox_vtdr6130_desc visionox_vtdr6130_panel_desc = {
+ .modes = visionox_vtdr6130_modes,
+ .num_modes = ARRAY_SIZE(visionox_vtdr6130_modes),
+ .bpc = 8,
+ .lanes = 4,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS,
+ .init_sequence = visionox_vtdr6130_on,
+ .dsc = {
+ .dsc_version_major = 0x1,
+ .dsc_version_minor = 0x2,
+ .slice_height = 40,
+ .slice_width = 540,
+ .slice_count = 2,
+ .bits_per_component = 8,
+ .bits_per_pixel = 8 << 4,
+ .block_pred_enable = true,
+ },
};
static int visionox_vtdr6130_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
+ struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
struct drm_display_mode *mode;
- mode = drm_mode_duplicate(connector->dev, &visionox_vtdr6130_mode);
+ mode = drm_mode_duplicate(connector->dev, ctx->desc->modes);
if (!mode)
return -ENOMEM;
@@ -284,23 +321,17 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
"Failed to get reset-gpios\n");
+ ctx->desc = (struct visionox_vtdr6130_desc *)of_device_get_match_data(dev);
+ if (!ctx->desc)
+ return -ENODEV;
+
ctx->dsi = dsi;
mipi_dsi_set_drvdata(dsi, ctx);
- ctx->dsc.dsc_version_major = 0x1;
- ctx->dsc.dsc_version_minor = 0x2;
- ctx->dsc.slice_height = 40;
- ctx->dsc.slice_width = 540;
- ctx->dsc.slice_count = 2;
- ctx->dsc.bits_per_component = 8;
- ctx->dsc.bits_per_pixel = 8 << 4;
- ctx->dsc.block_pred_enable = true;
-
- dsi->dsc = &ctx->dsc;
- dsi->lanes = 4;
- dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
- MIPI_DSI_CLOCK_NON_CONTINUOUS;
+ dsi->dsc = &ctx->desc->dsc;
+ dsi->lanes = ctx->desc->lanes;
+ dsi->format = ctx->desc->format;
+ dsi->mode_flags = ctx->desc->mode_flags;
ctx->panel.prepare_prev_first = true;
ret = drm_of_get_panel_orientation(dev->of_node, &ctx->orientation);
@@ -322,7 +353,7 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
}
static const struct of_device_id visionox_vtdr6130_of_match[] = {
- { .compatible = "visionox,vtdr6130" },
+ { .compatible = "visionox,vtdr6130", .data = &visionox_vtdr6130_panel_desc },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, visionox_vtdr6130_of_match);
--
2.54.0
WARNING: multiple messages have this Message-ID (diff)
From: Aaron Kling via B4 Relay <devnull+webgeek1234.gmail.com@kernel.org>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Aaron Kling <webgeek1234@gmail.com>
Subject: [PATCH v2 3/4] drm/panel: visionox-vtdr6130: Modularize panel config
Date: Fri, 25 Sep 2026 02:08:21 -0500 [thread overview]
Message-ID: <20260925-rp6-panel-v2-3-19c425e523de@gmail.com> (raw)
In-Reply-To: <20260925-rp6-panel-v2-0-19c425e523de@gmail.com>
From: Aaron Kling <webgeek1234@gmail.com>
The vtdr6130 is a DDIC, a common chip that is used by multiple panels.
Prepare the driver for more panels.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
drivers/gpu/drm/panel/panel-visionox-vtdr6130.c | 91 +++++++++++++++++--------
1 file changed, 61 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
index b66d6c7128c75..278f5acc2d661 100644
--- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
+++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
@@ -19,11 +19,24 @@
struct visionox_vtdr6130 {
struct drm_panel panel;
- struct drm_dsc_config dsc;
struct mipi_dsi_device *dsi;
struct gpio_desc *reset_gpio;
struct regulator_bulk_data *supplies;
enum drm_panel_orientation orientation;
+ struct visionox_vtdr6130_desc *desc;
+};
+
+struct visionox_vtdr6130_desc {
+ unsigned int bpc;
+ unsigned int lanes;
+ unsigned long mode_flags;
+ enum mipi_dsi_pixel_format format;
+
+ const struct drm_display_mode *modes;
+ unsigned int num_modes;
+ int (*init_sequence)(struct visionox_vtdr6130 *ctx);
+
+ struct drm_dsc_config dsc;
};
static const struct regulator_bulk_data visionox_vtdr6130_supplies[] = {
@@ -162,7 +175,7 @@ static int visionox_vtdr6130_prepare(struct drm_panel *panel)
visionox_vtdr6130_reset(ctx);
- ret = visionox_vtdr6130_on(ctx);
+ ret = ctx->desc->init_sequence(ctx);
if (ret < 0) {
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(visionox_vtdr6130_supplies),
@@ -187,26 +200,50 @@ static int visionox_vtdr6130_unprepare(struct drm_panel *panel)
return 0;
}
-static const struct drm_display_mode visionox_vtdr6130_mode = {
- .clock = (1080 + 20 + 2 + 20) * (2400 + 20 + 2 + 18) * 144 / 1000,
- .hdisplay = 1080,
- .hsync_start = 1080 + 20,
- .hsync_end = 1080 + 20 + 2,
- .htotal = 1080 + 20 + 2 + 20,
- .vdisplay = 2400,
- .vsync_start = 2400 + 20,
- .vsync_end = 2400 + 20 + 2,
- .vtotal = 2400 + 20 + 2 + 18,
- .width_mm = 71,
- .height_mm = 157,
+static const struct drm_display_mode visionox_vtdr6130_modes[] = {
+ {
+ .clock = (1080 + 20 + 2 + 20) * (2400 + 20 + 2 + 18) * 144 / 1000,
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 20,
+ .hsync_end = 1080 + 20 + 2,
+ .htotal = 1080 + 20 + 2 + 20,
+ .vdisplay = 2400,
+ .vsync_start = 2400 + 20,
+ .vsync_end = 2400 + 20 + 2,
+ .vtotal = 2400 + 20 + 2 + 18,
+ .width_mm = 71,
+ .height_mm = 157,
+ },
+};
+
+static struct visionox_vtdr6130_desc visionox_vtdr6130_panel_desc = {
+ .modes = visionox_vtdr6130_modes,
+ .num_modes = ARRAY_SIZE(visionox_vtdr6130_modes),
+ .bpc = 8,
+ .lanes = 4,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS,
+ .init_sequence = visionox_vtdr6130_on,
+ .dsc = {
+ .dsc_version_major = 0x1,
+ .dsc_version_minor = 0x2,
+ .slice_height = 40,
+ .slice_width = 540,
+ .slice_count = 2,
+ .bits_per_component = 8,
+ .bits_per_pixel = 8 << 4,
+ .block_pred_enable = true,
+ },
};
static int visionox_vtdr6130_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
+ struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
struct drm_display_mode *mode;
- mode = drm_mode_duplicate(connector->dev, &visionox_vtdr6130_mode);
+ mode = drm_mode_duplicate(connector->dev, ctx->desc->modes);
if (!mode)
return -ENOMEM;
@@ -284,23 +321,17 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
"Failed to get reset-gpios\n");
+ ctx->desc = (struct visionox_vtdr6130_desc *)of_device_get_match_data(dev);
+ if (!ctx->desc)
+ return -ENODEV;
+
ctx->dsi = dsi;
mipi_dsi_set_drvdata(dsi, ctx);
- ctx->dsc.dsc_version_major = 0x1;
- ctx->dsc.dsc_version_minor = 0x2;
- ctx->dsc.slice_height = 40;
- ctx->dsc.slice_width = 540;
- ctx->dsc.slice_count = 2;
- ctx->dsc.bits_per_component = 8;
- ctx->dsc.bits_per_pixel = 8 << 4;
- ctx->dsc.block_pred_enable = true;
-
- dsi->dsc = &ctx->dsc;
- dsi->lanes = 4;
- dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
- MIPI_DSI_CLOCK_NON_CONTINUOUS;
+ dsi->dsc = &ctx->desc->dsc;
+ dsi->lanes = ctx->desc->lanes;
+ dsi->format = ctx->desc->format;
+ dsi->mode_flags = ctx->desc->mode_flags;
ctx->panel.prepare_prev_first = true;
ret = drm_of_get_panel_orientation(dev->of_node, &ctx->orientation);
@@ -322,7 +353,7 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
}
static const struct of_device_id visionox_vtdr6130_of_match[] = {
- { .compatible = "visionox,vtdr6130" },
+ { .compatible = "visionox,vtdr6130", .data = &visionox_vtdr6130_panel_desc },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, visionox_vtdr6130_of_match);
--
2.54.0
next prev parent reply other threads:[~2026-09-25 7:08 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-25 7:08 [PATCH v2 0/4] drm/panel: Support Retroid Pocket 6 panel Aaron Kling
2026-09-25 7:08 ` Aaron Kling via B4 Relay
2026-09-25 7:08 ` [PATCH v2 1/4] dt-bindings: display: visionox,vtdr6130: Add " Aaron Kling
2026-09-25 7:08 ` Aaron Kling via B4 Relay
2026-09-25 7:12 ` sashiko-bot
2026-09-25 7:08 ` [PATCH v2 2/4] drm/panel: visionox-vtdr6130: Add panel orientation support Aaron Kling
2026-09-25 7:08 ` Aaron Kling via B4 Relay
2026-09-25 7:08 ` Aaron Kling [this message]
2026-09-25 7:08 ` [PATCH v2 3/4] drm/panel: visionox-vtdr6130: Modularize panel config Aaron Kling via B4 Relay
2026-09-25 7:15 ` sashiko-bot
2026-09-25 8:48 ` Neil Armstrong
2026-09-25 7:08 ` [PATCH v2 4/4] drm/panel: visionox-vtdr6130: Add Retroid Pocket 6 panel Aaron Kling
2026-09-25 7:08 ` Aaron Kling via B4 Relay
2026-09-25 7:16 ` sashiko-bot
2026-10-02 9:16 ` [PATCH v2 0/4] drm/panel: Support " Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260925-rp6-panel-v2-3-19c425e523de@gmail.com \
--to=webgeek1234@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.