Re: [PATCH RFC 03/12] dt-bindings: usb: Add Qualcomm 1st-gen PMIC Type-C

[sashiko-bot@kernel.org]

> From: David Heidelberg <david@ixit.cz>
> 
> Add a binding for the first generation of the Qualcomm PMIC USB Type-C
> port controller, found on the PM660 and PMI8998 PMICs.
> 
> Unlike the later standalone Type-C peripheral at 0x1500 (e.g. PM8150B),
> the gen1 Type-C CC logic is part of the charger's USBIN peripheral
> (base 0x1300) and signals all Type-C events (CC state change,
> tCCDebounce done, VBUS change and error) through a single aggregate
> "type-c-change" interrupt. The USB PD PHY at 0x1700 is register
> compatible with PM8150B.
> 
> The different interrupt set and register layout make it a separate
> binding rather than another variant of qcom,pmic-typec. As with PM8150B,
> the Type-C block and PD PHY are described as a separate SPMI node from
> the charger.
> 
> Allow typec nodes of the Qualcomm SPMI PMIC to use the new binding as
> well.
> 
> Assisted-by: LLM
> Signed-off-by: David Heidelberg <david@ixit.cz>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260926-typec-v1-0-31adc19f32c6@ixit.cz?part=3