From: Pablo Mazzini <pmazzini@gmail.com>
To: Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>
Cc: Pablo Mazzini <pmazzini@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-rtc@vger.kernel.org,
linux-sunxi@lists.linux.dev
Subject: [PATCH v2 00/11] ARM: sunxi: add Allwinner B288 and the PocketBook Verse
Date: Sun, 27 Sep 2026 16:10:05 +0100 [thread overview]
Message-ID: <20260927151016.186493-1-pmazzini@gmail.com> (raw)
The Allwinner B288 (sun8iw10p1) is a dual Cortex-A7 SoC used in e-book
readers. This series adds the CCU and pin controller drivers, the RTC,
I2C, MMC and NMI compatibles, the SoC .dtsi, and one board: the
PocketBook Verse (PB629), a 6" reader.
The B288 is closest to the A64: most of its PLLs are bit-identical.
The clock and pin descriptions come from Allwinner's BSP, cross-checked
against ccu-sun50i-a64.c. Tested on a PB629, boots to userspace.
Changes since v1:
- Add this cover letter.
- Drop both new bindings; add the compatibles to the existing
allwinner,sun4i-a10-{ccu,pinctrl}.yaml instead.
- Rewrite the pinctrl driver in the DT-provided pinmux style.
Pablo Mazzini (11):
dt-bindings: clock: sun4i-a10-ccu: add Allwinner B288
clk: sunxi-ng: add Allwinner B288 CCU driver
dt-bindings: pinctrl: sun4i-a10: add Allwinner B288
pinctrl: sunxi: add Allwinner B288 pin controller driver
dt-bindings: rtc: sun6i-a31: add Allwinner B288
rtc: sun6i: add Allwinner B288 compatible
dt-bindings: i2c: mv64xxx: add Allwinner B288
dt-bindings: mmc: sun4i-a10-mmc: add Allwinner B288
dt-bindings: interrupt-controller: add Allwinner B288 NMI
dt-bindings: arm: sunxi: add PocketBook Verse
ARM: sunxi: add B288 and the PocketBook Verse board
.../devicetree/bindings/arm/sunxi.yaml | 5 +
.../clock/allwinner,sun4i-a10-ccu.yaml | 1 +
.../bindings/i2c/marvell,mv64xxx-i2c.yaml | 1 +
.../allwinner,sun7i-a20-sc-nmi.yaml | 1 +
.../bindings/mmc/allwinner,sun4i-a10-mmc.yaml | 2 +
.../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 23 +
.../bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 2 +
arch/arm/boot/dts/allwinner/Makefile | 1 +
.../allwinner/sun8i-b288-pocketbook-verse.dts | 122 ++++
arch/arm/boot/dts/allwinner/sun8i-b288.dtsi | 304 ++++++++
arch/arm/mach-sunxi/sunxi.c | 1 +
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-b288.c | 660 ++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-b288.h | 10 +
drivers/pinctrl/sunxi/Kconfig | 10 +
drivers/pinctrl/sunxi/Makefile | 1 +
drivers/pinctrl/sunxi/pinctrl-sun8i-b288.c | 53 ++
drivers/rtc/rtc-sun6i.c | 1 +
include/dt-bindings/clock/sun8i-b288-ccu.h | 88 +++
include/dt-bindings/reset/sun8i-b288-ccu.h | 45 ++
21 files changed, 1337 insertions(+)
create mode 100644 arch/arm/boot/dts/allwinner/sun8i-b288-pocketbook-verse.dts
create mode 100644 arch/arm/boot/dts/allwinner/sun8i-b288.dtsi
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-b288.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-b288.h
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-b288.c
create mode 100644 include/dt-bindings/clock/sun8i-b288-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-b288-ccu.h
--
2.53.0
next reply other threads:[~2026-09-27 15:11 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-27 15:10 Pablo Mazzini [this message]
2026-09-27 15:10 ` [PATCH v2 01/11] dt-bindings: clock: sun4i-a10-ccu: add Allwinner B288 Pablo Mazzini
2026-09-30 10:08 ` Krzysztof Kozlowski
2026-09-27 15:10 ` [PATCH v2 02/11] clk: sunxi-ng: add Allwinner B288 CCU driver Pablo Mazzini
2026-09-27 15:23 ` sashiko-bot
2026-09-27 15:10 ` [PATCH v2 03/11] dt-bindings: pinctrl: sun4i-a10: add Allwinner B288 Pablo Mazzini
2026-09-27 15:18 ` sashiko-bot
2026-09-27 15:10 ` [PATCH v2 04/11] pinctrl: sunxi: add Allwinner B288 pin controller driver Pablo Mazzini
2026-09-27 15:26 ` sashiko-bot
2026-09-27 15:10 ` [PATCH v2 05/11] dt-bindings: rtc: sun6i-a31: add Allwinner B288 Pablo Mazzini
2026-09-27 15:17 ` sashiko-bot
2026-09-30 10:10 ` Krzysztof Kozlowski
2026-09-30 10:47 ` Pablo Mazzini
2026-09-27 15:10 ` [PATCH v2 06/11] rtc: sun6i: add Allwinner B288 compatible Pablo Mazzini
2026-09-27 15:18 ` sashiko-bot
2026-09-27 15:10 ` [PATCH v2 07/11] dt-bindings: i2c: mv64xxx: add Allwinner B288 Pablo Mazzini
2026-09-28 10:00 ` Andi Shyti
2026-09-30 10:11 ` Krzysztof Kozlowski
2026-09-27 15:10 ` [PATCH v2 08/11] dt-bindings: mmc: sun4i-a10-mmc: " Pablo Mazzini
2026-09-30 10:15 ` Krzysztof Kozlowski
2026-09-30 16:04 ` Ulf Hansson
2026-09-27 15:10 ` [PATCH v2 09/11] dt-bindings: interrupt-controller: add Allwinner B288 NMI Pablo Mazzini
2026-09-30 10:17 ` Krzysztof Kozlowski
2026-09-27 15:10 ` [PATCH v2 10/11] dt-bindings: arm: sunxi: add PocketBook Verse Pablo Mazzini
2026-09-27 15:27 ` sashiko-bot
2026-09-27 15:10 ` [PATCH v2 11/11] ARM: sunxi: add B288 and the PocketBook Verse board Pablo Mazzini
2026-09-27 15:29 ` sashiko-bot
2026-09-30 12:01 ` Andre Przywara
2026-09-30 17:52 ` Pablo Mazzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260927151016.186493-1-pmazzini@gmail.com \
--to=pmazzini@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=samuel@sholland.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.