From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
To: "Paul E . McKenney" <paulmck@kernel.org>
Cc: linux-kernel@vger.kernel.org,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Boqun Feng <boqun@kernel.org>,
Bradley Morgan <brads@mainlining.org>,
Gary Guo <gary@garyguo.net>,
rcu@vger.kernel.org, lkmm@lists.linux.dev
Subject: [PATCH hazptr 4/4] hazptr: Introduce "try acquire" fast path, fallback to overflow list
Date: Sun, 27 Sep 2026 11:51:31 -0400 [thread overview]
Message-ID: <20260927155134.4740-5-mathieu.desnoyers@efficios.com> (raw)
In-Reply-To: <20260927155134.4740-1-mathieu.desnoyers@efficios.com>
Introduce a "try acquire" hazard pointer fast path, which performs an
early load of the address to store it into the hazard pointer slot, and
then re-loads that address after a barrier to check whether it has
changed meanwhile.
On comparison failure, rather than re-try, guarantee forward progress by
falling back to the __hazptr_acquire slow path on failure.
The acquire slow path attempts a try-acquire for any available per-CPU
slot. If that fails, it chains the backup slot into the overflow list,
therefore guaranteeing forward progress for both hazard pointer
read-side and synchronize:
- Readers set the wildcard, and then proceed to set the more
specific address to replace the wildcard.
- One synchronize alternates between two overflow list periods,
scanning each one while readers are added to the other period,
thus preventing a steady flow of readers from preventing
synchronize forward progress.
With this change, the scan on per-CPU slots don't need to expect a
wildcard anymore, because none can be produced by readers. Wildcards are
only expected within overflow lists.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Boqun Feng <boqun@kernel.org>
Cc: Bradley Morgan <brads@mainlining.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: <rcu@vger.kernel.org>
Cc: <lkmm@lists.linux.dev>
---
include/linux/hazptr.h | 47 +++++++++++--------
kernel/hazptr.c | 103 ++++++++++++++++++++---------------------
2 files changed, 76 insertions(+), 74 deletions(-)
diff --git a/include/linux/hazptr.h b/include/linux/hazptr.h
index d1670121947a..fcf017ca2255 100644
--- a/include/linux/hazptr.h
+++ b/include/linux/hazptr.h
@@ -29,9 +29,6 @@
/* 4 slots (each sizeof(hazptr_slot_item)) fit in a single 64-byte cache line. */
#define NR_HAZPTR_PERCPU_SLOTS 4
-/* The current hazard pointer wildcard. */
-extern void *hazptr_wildcard;
-
/*
* Hazard pointer slot.
*/
@@ -190,6 +187,31 @@ void hazptr_note_context_switch(void)
}
}
+/* Try hazard pointer protection. */
+static inline
+void *__hazptr_try_acquire(struct hazptr_ctx *ctx, void * const *addr_p, struct hazptr_slot *slot)
+{
+ void *early_addr, *addr;
+
+ if (unlikely(slot->addr))
+ return NULL;
+ early_addr = READ_ONCE(*addr_p); /* Early load. */
+ WRITE_ONCE(slot->addr, early_addr); /* Store B */
+ /* Memory ordering: Store B before Load A. */
+ smp_mb();
+ addr = READ_ONCE(*addr_p); /* Load A */
+ /*
+ * Validate that address did not change between Early load and Load A.
+ * Use ptr_eq() to make sure that result from Load A is returned to the
+ * caller to preserve address dependency.
+ */
+ if (unlikely(!ptr_eq(addr, early_addr))) {
+ WRITE_ONCE(slot->addr, NULL);
+ return NULL;
+ }
+ return addr;
+}
+
/**
* hazptr_acquire - Load pointer at address and protect with hazard pointer.
*
@@ -245,24 +267,9 @@ void *hazptr_acquire(struct hazptr_ctx *ctx, void * const *addr_p)
ctx->acquire_cpu = smp_processor_id();
ctx->acquire_caller = _THIS_IP_;
#endif
- if (unlikely(slot->addr))
+ addr = __hazptr_try_acquire(ctx, addr_p, slot);
+ if (unlikely(!addr))
return __hazptr_acquire(ctx, addr_p);
- WRITE_ONCE(slot->addr, READ_ONCE(hazptr_wildcard)); /* Store B */
-
- /* Memory ordering: Store B before Load A. */
- smp_mb();
-
- /*
- * Load @addr_p after storing wildcard to the hazard pointer slot.
- */
- addr = READ_ONCE(*addr_p); /* Load A */
-
- /*
- * We don't care about ordering of Store C. It will simply
- * replace the wildcard by a more specific address. If addr is
- * NULL, we simply store NULL into the slot.
- */
- WRITE_ONCE(slot->addr, addr); /* Store C */
slot_item->ctx.ctx = ctx;
ctx->slot = slot;
return addr;
diff --git a/kernel/hazptr.c b/kernel/hazptr.c
index 13faa5ba7677..3ca73b56a5c2 100644
--- a/kernel/hazptr.c
+++ b/kernel/hazptr.c
@@ -13,17 +13,9 @@
#include <linux/list.h>
#include <linux/export.h>
-static DEFINE_MUTEX(hazptr_phase_lock); /* Protect the wildcard and list phase flip. */
+#define HAZPTR_WILDCARD ((void *) 1UL)
-/*
- * The current hazard pointer wildcard. Flips between 1UL and 2UL to guarantee
- * hazptr_synchronize forward progress even with a steady stream of readers.
- * This wildcard value is used by acquire to temporarily tag the per-CPU slots.
- * This also affects the overflow list selection: the current list used by
- * readers is array[(unsigned long) hazptr_wildcard - 1].
- */
-void *hazptr_wildcard = (void *) 1UL;
-EXPORT_SYMBOL_GPL(hazptr_wildcard);
+static DEFINE_MUTEX(hazptr_phase_lock); /* Protect the list phase flip. */
/* The current overflow list phase. */
static unsigned int hazptr_overflow_list_phase;
@@ -41,6 +33,10 @@ struct hazptr_overflow_list {
* successively iterates on both lists. Therefore, only list removals
* can cause the iteration to retry, and the number of removals is
* limited to the number of list elements.
+ *
+ * Due to the overflow list raw spin lock, the hazard pointer readers are
+ * blocking, starvation-free with bounded waiting, assuming bounded critical
+ * sections and no NMI or virtualization-induced holder preemption.
*/
struct hazptr_overflow_list_flip {
struct hazptr_overflow_list array[2];
@@ -51,26 +47,12 @@ static DEFINE_PER_CPU(struct hazptr_overflow_list_flip, percpu_overflow_list_fli
DEFINE_PER_CPU(struct hazptr_percpu_slots, hazptr_percpu_slots);
EXPORT_PER_CPU_SYMBOL_GPL(hazptr_percpu_slots);
-static
-void *flip_wildcard(void *wildcard)
-{
- return ((unsigned long) wildcard == 1UL) ? (void *) 2UL : (void *) 1UL;
-}
-
static
unsigned int flip_list_phase(unsigned int phase)
{
return 1 - phase;
}
-static
-bool is_wildcard(void *addr)
-{
- if ((unsigned long) addr == 1UL || (unsigned long) addr == 2UL)
- return true;
- return false;
-}
-
static
struct hazptr_slot *hazptr_get_free_percpu_slot(struct hazptr_ctx *ctx)
{
@@ -96,16 +78,36 @@ struct hazptr_slot *hazptr_get_free_percpu_slot(struct hazptr_ctx *ctx)
*/
void *__hazptr_acquire(struct hazptr_ctx *ctx, void * const *addr_p)
{
- struct hazptr_slot *slot = hazptr_get_free_percpu_slot(ctx);
+ struct hazptr_slot *slot;
void *addr;
/*
- * If all the per-CPU slots are already in use, fallback
- * to the backup slot.
+ * In case we are called due to nested use of hazard pointers,
+ * try a slot protection with per-CPU slots.
*/
- if (unlikely(!slot))
- slot = hazptr_chain_backup_slot(ctx);
- WRITE_ONCE(slot->addr, READ_ONCE(hazptr_wildcard)); /* Store B */
+ slot = hazptr_get_free_percpu_slot(ctx);
+ if (likely(slot)) {
+ addr = __hazptr_try_acquire(ctx, addr_p, slot);
+ if (addr) {
+ ctx->slot = slot;
+ return addr;
+ }
+ }
+
+ /*
+ * The backup slot overflow list guarantees forward progress of both
+ * hazard pointer readers and synchronize:
+ *
+ * - Readers set the wildcard, and then proceed to set the more
+ * specific address to replace the wildcard.
+ *
+ * - One synchronize alternates between two overflow list periods,
+ * scanning each one while readers are added to the other period,
+ * thus preventing a steady flow of readers from preventing
+ * synchronize forward progress.
+ */
+ slot = hazptr_chain_backup_slot(ctx);
+ WRITE_ONCE(slot->addr, HAZPTR_WILDCARD); /* Store B */
/* Memory ordering: Store B before Load A. */
smp_mb();
@@ -121,20 +123,21 @@ void *__hazptr_acquire(struct hazptr_ctx *ctx, void * const *addr_p)
* NULL, we simply store NULL into the slot.
*/
WRITE_ONCE(slot->addr, addr); /* Store C */
+
ctx->slot = slot;
- if (!addr && hazptr_slot_is_backup(ctx, slot))
+ if (!addr)
hazptr_unchain_backup_slot(ctx);
return addr;
}
EXPORT_SYMBOL_GPL(__hazptr_acquire);
/*
- * Perform piecewise iteration on overflow list waiting until "addr" is
- * not present. Raw spinlock is released and taken between each list
- * item and busy loop iteration. The overflow list generation is checked
- * each time the lock is taken to validate that the list has not changed
- * before resuming iteration or busy wait. If the generation has
- * changed, retry the entire list traversal.
+ * Perform piecewise iteration on overflow list waiting until "addr" and
+ * wildcard are not present. Raw spinlock is released and taken between each
+ * list item and busy loop iteration. The overflow list generation is checked
+ * each time the lock is taken to validate that the list has not changed before
+ * resuming iteration or busy wait. If the generation has changed, retry the
+ * entire list traversal.
*/
static
void hazptr_synchronize_overflow_list(struct hazptr_overflow_list *overflow_list, void *addr)
@@ -147,13 +150,11 @@ void hazptr_synchronize_overflow_list(struct hazptr_overflow_list *overflow_list
retry:
snapshot_gen = overflow_list->gen;
hlist_for_each_entry(backup_slot, &overflow_list->head, overflow_node) {
- /* Busy-wait if node is found. */
+ /* Busy-wait if addr or wildcard are found. */
for (;;) {
void *load_addr = smp_load_acquire(&backup_slot->slot.addr); /* Load B */
- /* We don't expect wildcards in overflow list. */
- WARN_ON_ONCE(is_wildcard(load_addr));
- if (load_addr != addr)
+ if (load_addr != addr && load_addr != HAZPTR_WILDCARD)
break;
raw_spin_unlock_irqrestore(&overflow_list->lock, flags);
cpu_relax();
@@ -174,7 +175,7 @@ void hazptr_synchronize_overflow_list(struct hazptr_overflow_list *overflow_list
}
static
-void hazptr_synchronize_cpu_slots(int cpu, void *addr, void *scan_wildcard)
+void hazptr_synchronize_cpu_slots(int cpu, void *addr)
{
struct hazptr_percpu_slots *percpu_slots = per_cpu_ptr(&hazptr_percpu_slots, cpu);
unsigned int idx;
@@ -182,13 +183,13 @@ void hazptr_synchronize_cpu_slots(int cpu, void *addr, void *scan_wildcard)
for (idx = 0; idx < NR_HAZPTR_PERCPU_SLOTS; idx++) {
struct hazptr_slot_item *item = &percpu_slots->items[idx];
- /* Busy-wait if node is found. */
- smp_cond_load_acquire(&item->slot.addr, VAL != addr && VAL != scan_wildcard); /* Load B */
+ /* Busy-wait if addr is found. */
+ smp_cond_load_acquire(&item->slot.addr, VAL != addr); /* Load B */
}
}
static
-void hazptr_scan_cpu_slots_period(void *addr, void *scan_wildcard)
+void hazptr_scan_cpu_slots(void *addr)
{
int cpu;
@@ -196,16 +197,13 @@ void hazptr_scan_cpu_slots_period(void *addr, void *scan_wildcard)
for_each_possible_cpu(cpu) {
/*
* Scan CPU slots.
- * Forward progress against recurring wildcards is guaranteed
- * by scanning for one wildcard while new elements use the
- * other wildcard value (1UL vs 2UL).
* Forward progress against recurring single hazard pointer
* values is guaranteed by the fact that a hazard pointer
* is not reclaimed nor reused until the scan for that hazard
* pointer completes, which prevents a steady flow of readers
* to acquire that same hazard pointer value.
*/
- hazptr_synchronize_cpu_slots(cpu, addr, scan_wildcard);
+ hazptr_synchronize_cpu_slots(cpu, addr);
}
}
@@ -237,7 +235,6 @@ void hazptr_scan_overflow_list_period(void *addr, unsigned int scan_idx)
void hazptr_synchronize(void *addr)
{
unsigned int scan_list_phase;
- void *scan_wildcard;
/*
* Busy-wait should only be done from preemptible context.
@@ -251,16 +248,14 @@ void hazptr_synchronize(void *addr)
*/
if (!addr)
return;
+
/* Memory ordering: Store A before Load B. */
smp_mb();
guard(mutex)(&hazptr_phase_lock);
/* Scan per-CPU slots. */
- scan_wildcard = flip_wildcard(hazptr_wildcard);
- hazptr_scan_cpu_slots_period(addr, scan_wildcard);
- WRITE_ONCE(hazptr_wildcard, scan_wildcard); /* Flip the current wildcard. */
- hazptr_scan_cpu_slots_period(addr, flip_wildcard(scan_wildcard));
+ hazptr_scan_cpu_slots(addr);
/*
* Scan overflow lists *after* scanning per-CPU slots. See
--
2.43.0
next prev parent reply other threads:[~2026-09-27 15:51 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-27 15:51 [PATCH hazptr 0/4] Hazard pointer updates Mathieu Desnoyers
2026-09-27 15:51 ` [PATCH hazptr 1/4] hazptr: Fix two-phase hazptr_synchronize race with detach Mathieu Desnoyers
2026-09-27 15:51 ` [PATCH hazptr 2/4] compiler.h: Introduce ptr_eq() to preserve address dependency Mathieu Desnoyers
2026-09-29 14:47 ` Linus Torvalds
2026-09-29 15:04 ` Mathieu Desnoyers
2026-09-29 15:16 ` Linus Torvalds
2026-09-29 15:42 ` Mathieu Desnoyers
2026-09-29 16:22 ` Gary Guo
2026-09-27 15:51 ` [PATCH hazptr 3/4] Documentation: RCU: Refer to ptr_eq() Mathieu Desnoyers
2026-09-27 15:51 ` Mathieu Desnoyers [this message]
2026-09-27 16:40 ` [PATCH hazptr 4/4] hazptr: Introduce "try acquire" fast path, fallback to overflow list Boqun Feng
2026-09-27 17:15 ` Mathieu Desnoyers
2026-09-27 17:24 ` Boqun Feng
2026-09-27 17:36 ` Mathieu Desnoyers
2026-09-27 18:16 ` Boqun Feng
2026-09-30 16:53 ` Paul E. McKenney
2026-09-27 17:26 ` Boqun Feng
2026-09-27 22:39 ` Gary Guo
2026-09-28 9:12 ` Boqun Feng
2026-09-28 11:32 ` Gary Guo
2026-09-28 14:56 ` Bradley Morgan
2026-09-28 15:32 ` Boqun Feng
2026-09-30 16:55 ` Paul E. McKenney
2026-09-28 9:27 ` Kunwu Chan
2026-10-06 8:01 ` Gary Guo
2026-09-27 16:07 ` [PATCH hazptr 0/4] Hazard pointer updates Bradley Morgan
2026-09-27 16:27 ` Mathieu Desnoyers
2026-09-27 16:33 ` Bradley Morgan
2026-09-27 16:45 ` Mathieu Desnoyers
2026-09-30 17:01 ` Paul E. McKenney
2026-09-27 16:15 ` Boqun Feng
2026-09-27 16:20 ` Mathieu Desnoyers
2026-09-27 16:22 ` Bradley Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260927155134.4740-5-mathieu.desnoyers@efficios.com \
--to=mathieu.desnoyers@efficios.com \
--cc=boqun@kernel.org \
--cc=brads@mainlining.org \
--cc=gary@garyguo.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lkmm@lists.linux.dev \
--cc=paulmck@kernel.org \
--cc=rcu@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.