From: Primoz Fiser <primoz.fiser@norik.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, upstream@lists.phytec.de
Subject: [PATCH 0/2] ARM: dts: imx6: phytec-mira: phyBOARD-Mira fixes
Date: Wed, 30 Sep 2026 12:34:23 +0200 [thread overview]
Message-ID: <20260930103425.2315286-1-primoz.fiser@norik.com> (raw)
Two small fixes for the PHYTEC phyBOARD-Mira-i.MX6 boards:
- The i.MX6DL NAND variant was still described as the LC (Low Cost)
board, missing CAN/PCIe and capped at 100Mbps Ethernet, while every
other in-tree phyBOARD-Mira .dts is the FF (Full Featured) variant.
Sync it to match its siblings (1/2).
- Since commit 888e5fad9b78 ("Input: stmpe - add axis inversion and
swapping capability") landed, the touchscreen axis inversion these
boards need can be described in devicetree instead of userspace (2/2).
Primoz Fiser (2):
ARM: dts: imx6dl-phytec-mira-nand: Enable all peripherals
ARM: dts: imx6qdl-phytec-mira: Add touchscreen-inverted properties
arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts | 8 ++++++--
arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi | 2 ++
2 files changed, 8 insertions(+), 2 deletions(-)
--
2.34.1
next reply other threads:[~2026-09-30 10:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-30 10:34 Primoz Fiser [this message]
2026-09-30 10:34 ` [PATCH 1/2] ARM: dts: imx6dl-phytec-mira-nand: Enable all peripherals Primoz Fiser
2026-09-30 10:40 ` sashiko-bot
2026-09-30 13:51 ` Primoz Fiser
2026-09-30 10:34 ` [PATCH 2/2] ARM: dts: imx6qdl-phytec-mira: Add touchscreen-inverted properties Primoz Fiser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260930103425.2315286-1-primoz.fiser@norik.com \
--to=primoz.fiser@norik.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=upstream@lists.phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.