* [PATCH v3 1/2] dt-bindings: arm: rockchip: add ALIENTEK QuarkPi-CA2 [not found] <179086058377.25869.5809349568462938314@163.com> @ 2026-10-01 13:16 ` BG9OXA 2026-10-01 13:16 ` BG9OXA 1 sibling, 0 replies; 5+ messages in thread From: BG9OXA @ 2026-10-01 13:16 UTC (permalink / raw) To: linux-rockchip; +Cc: linux-arm-kernel, devicetree, Heiko Stuebner Document the ALIENTEK QuarkPi-CA2, an RK3588S based single board computer. Signed-off-by: BG9OXA <bg9oxa@163.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index a799bb843..a3191bb90 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -182,6 +182,11 @@ properties: - const: alientek,clrv1126f - const: rockchip,rv1126 + - description: Alientek QuarkPi-CA2 board + items: + - const: alientek,quarkpi-ca2 + - const: rockchip,rk3588s + - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards items: - const: edgeble,neural-compute-module-2-io # Edgeble Neural Compute Module 2 IO Board -- 2.47.3 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 1/2] dt-bindings: arm: rockchip: add ALIENTEK QuarkPi-CA2 @ 2026-10-01 13:16 ` BG9OXA 0 siblings, 0 replies; 5+ messages in thread From: BG9OXA @ 2026-10-01 13:16 UTC (permalink / raw) To: linux-rockchip; +Cc: linux-arm-kernel, devicetree, Heiko Stuebner Document the ALIENTEK QuarkPi-CA2, an RK3588S based single board computer. Signed-off-by: BG9OXA <bg9oxa@163.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index a799bb843..a3191bb90 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -182,6 +182,11 @@ properties: - const: alientek,clrv1126f - const: rockchip,rv1126 + - description: Alientek QuarkPi-CA2 board + items: + - const: alientek,quarkpi-ca2 + - const: rockchip,rk3588s + - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards items: - const: edgeble,neural-compute-module-2-io # Edgeble Neural Compute Module 2 IO Board -- 2.47.3 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 2/2] arm64: dts: rockchip: add ALIENTEK QuarkPi-CA2 [not found] <179086058377.25869.5809349568462938314@163.com> @ 2026-10-01 13:16 ` BG9OXA 2026-10-01 13:16 ` BG9OXA 1 sibling, 0 replies; 5+ messages in thread From: BG9OXA @ 2026-10-01 13:16 UTC (permalink / raw) To: linux-rockchip; +Cc: linux-arm-kernel, devicetree, Heiko Stuebner The QuarkPi-CA2 is an RK3588S based single board computer with LPDDR4X RAM, eMMC, microSD, one Gigabit Ethernet port (YT8531 PHY), HDMI 2.1, DisplayPort over USB-C, M.2 PCIe 2.0 x1, USB 2.0 and 3.0 host ports, an ES8388 audio codec with headphone amplifier, a MIPI CSI camera connector, an IR receiver, a PWM controlled fan, ADC keys and a 40-pin GPIO header. The GbE MAC receives its reference clock from the PHY, and the PHY keeps its clock output enabled while the link is down so that the MAC can be initialised. The MDIO bus is described with separate mdio and mdio-child nodes, and the RK3588S RGMII delays are applied on the MAC side (tx_delay). Signed-off-by: BG9OXA <bg9oxa@163.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588s-quarkpi-ca2.dts | 1149 +++++++++++++++++ 2 files changed, 1150 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index e7936a21c..34423e8cf 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -231,6 +231,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-lubancat-4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-quarkpi-ca2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts new file mode 100644 index 000000000..3f971ff8a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts @@ -0,0 +1,1149 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/media/video-interfaces.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/thermal/thermal.h> +#include "rk3588s.dtsi" +/ { + model = "Alientek QuarkPI-CA2"; + compatible = "alientek,quarkpi-ca2", "rockchip,rk3588s"; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops: ramoops@118000 { + compatible = "ramoops"; + reg = <0 0x118000 0 0xd8000>; + console-size = <0x80000>; + ftrace-size = <0x00000>; + pmsg-size = <0x30000>; + record-size = <0x14000>; + }; + }; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + ethernet0 = &gmac1; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-vol-up { + label = "volume up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17000>; + }; + + button-vol-down { + label = "volume down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <417000>; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + work_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_pin>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + pwms = <&pwm7 0 50000 0>; + cooling-levels = <0 50 100 150 200 255>; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_3v3_sd_s0: vcc-3v3-sd-s0 { + compatible = "regulator-fixed"; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_s0_pwr>; + regulator-name = "vcc_3v3_sd_s0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + gpio-controller; + #gpio-cells = <2>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vcc_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m0_xfer>; + status = "okay"; + + vdd_npu_s0: vdd_npu_mem_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + husb311: husb311@4e { + status = "okay"; + compatible = "hynetek,husb311", "richtek,rt1711h"; + reg = <0x4e>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&vbus5v0_typec>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <0x401912c>; + sink-pdos = <0x4019064>; + op-sink-microwatt = <1000000>; + + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0xffffffff>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_hs: endpoint { + remote-endpoint = <&usb_host0_hs_ep>; + }; + }; + + port@1 { + reg = <1>; + usbc0_ss: endpoint { + remote-endpoint = <&usb_host0_ss_ep>; + }; + }; + + port@2 { + reg = <2>; + usbc0_sbu: endpoint { + remote-endpoint = <&usbdp_phy0_dp_out>; + }; + }; + }; + }; + }; + }; + + &cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; + mem-supply = <&vdd_cpu_lit_mem_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; + mem-supply = <&vdd_cpu_lit_mem_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; + mem-supply = <&vdd_cpu_lit_mem_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; + mem-supply = <&vdd_cpu_lit_mem_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; + mem-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; + mem-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; + mem-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; + mem-supply = <&vdd_cpu_big1_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&rknn_core_0 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_mem_s0>; + status = "okay"; +}; + +&rknn_core_1 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_mem_s0>; + status = "okay"; +}; + +&rknn_core_2 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_mem_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_1v8_s3>; + status = "okay"; +}; + +&sdmmc { + max-frequency = <150000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&gmac1 { + phy-mode = "rgmii"; + clock_in_out = "input"; + + snps,reset-gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 20000 100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus + &gmac1_clkinout>; + + tx_delay = <0x2f>; + rx_delay = <0x00>; + + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + }; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&pwm7 { + pinctrl-0 = <&pwm7m0_pins>; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8_s0>; +}; + +&tsadc { + status = "okay"; +}; + +&pinctrl { + sdmmc { + sd_s0_pwr: sd-s0-pwr { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie2x1l2_perstn: pcie2x1l2-perstn { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + typec5v_pwren: typec5v-pwren { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbc0_int: usbc0-int { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_pin: work-led-pin { + rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&package_thermal { + polling-delay = <1000>; + + trips { + fan_trip0: fan-trip0 { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + fan_trip1: fan-trip1 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + fan_trip2: fan-trip2 { + temperature = <60000>; + hysteresis = <2000>; + type = "active"; + }; + + fan_trip3: fan-trip3 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + + fan_trip4: fan-trip4 { + temperature = <70000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&fan_trip0>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map1 { + trip = <&fan_trip1>; + cooling-device = <&fan 1 2>; + }; + + map2 { + trip = <&fan_trip2>; + cooling-device = <&fan 2 3>; + }; + + map3 { + trip = <&fan_trip3>; + cooling-device = <&fan 3 4>; + }; + + map4 { + trip = <&fan_trip4>; + cooling-device = <&fan 4 THERMAL_NO_LIMIT>; + }; + }; +}; + +&hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdptxphy0 { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; + +&i2s5_8ch { + status = "okay"; +}; + +&hdmi0_sound { + status = "okay"; +}; + +&sata0 { + status = "disabled"; +}; + +&combphy0_ps { + status = "okay"; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2x1l2_perstn>; + reset-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_s3>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&usb_host2_xhci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_host0_hs_ep: endpoint { + remote-endpoint = <&usbc0_hs>; + }; + }; + + port@1 { + reg = <1>; + usb_host0_ss_ep: endpoint { + remote-endpoint = <&usbc0_ss>; + }; + }; + }; +}; + +/ { + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + vbus5v0_typec: vbus5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc5v0_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1m4_xfer>; + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388", "everest,es8328"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT_TO_IO>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + AVDD-supply = <&vcc_3v3_s0>; + DVDD-supply = <&vcc_1v8_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + #sound-dai-cells = <0>; + }; + }; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck &i2s0_mclk &i2s0_sclk &i2s0_sdi0 &i2s0_sdo0>; + status = "okay"; +}; + +&pinctrl { + headphone { + hp_det: hp-det { + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hp_con: hp-con { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +/ { + analog_sound: analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det &hp_con>; + simple-audio-card,name = "QuarkPi-CA2 ES8388"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_cpu>; + simple-audio-card,frame-master = <&sound_cpu>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,aux-devs = <&hp_amp>; + simple-audio-card,hp-det-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; + simple-audio-card,pin-switches = "Headphones"; + simple-audio-card,widgets = + "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Microphone", "Main Mic"; + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "Headphones", "Headphone Power OUTL", + "Headphones", "Headphone Power OUTR", + "Headphone Power INL", "LOUT1", + "Headphone Power INR", "ROUT1", + "Headphone Power INL", "LOUT2", + "Headphone Power INR", "ROUT2", + "LINPUT1", "Headset Mic", + "LINPUT2", "Main Mic", + "RINPUT1", "Headset Mic", + "RINPUT2", "Main Mic"; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + hp_amp: audio-amplifier-hp { + compatible = "simple-audio-amplifier"; + sound-name-prefix = "Headphone Power"; + enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m1_xfer>; + status = "okay"; +}; + + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5m1_xfer>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0m3_pins>, <&spi0m3_cs0>, <&spi0m3_cs1>; + num-cs = <2>; + status = "okay"; + +}; + +&rga3_core0 {}; + +&rga3_core1 {}; + +&pinctrl { + ir { + ir_receiver_pin: ir-receiver-pin { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + + +&{/} { + ir_receiver: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_receiver_pin>; + }; +}; + + +&dp0 { + status = "okay"; +}; + +&dp0_in { + dp0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dp0>; + }; +}; + +&dp0_out { + dp0_out_con: endpoint { + remote-endpoint = <&usbdp_phy0_dp_in>; + }; +}; + +&vp1 { + vp1_out_dp0: endpoint@a { + reg = <ROCKCHIP_VOP2_EP_DP0>; + remote-endpoint = <&dp0_in_vp1>; + }; +}; + +&usbdp_phy0 { + orientation-switch; + mode-switch; + sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + rockchip,dp-lane-mux = <2 3>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy0_dp_in: endpoint@2 { + reg = <2>; + remote-endpoint = <&dp0_out_con>; + }; + + usbdp_phy0_dp_out: endpoint@3 { + reg = <3>; + remote-endpoint = <&usbc0_sbu>; + }; + }; +}; -- 2.47.3 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 2/2] arm64: dts: rockchip: add ALIENTEK QuarkPi-CA2 @ 2026-10-01 13:16 ` BG9OXA 0 siblings, 0 replies; 5+ messages in thread From: BG9OXA @ 2026-10-01 13:16 UTC (permalink / raw) To: linux-rockchip; +Cc: linux-arm-kernel, devicetree, Heiko Stuebner The QuarkPi-CA2 is an RK3588S based single board computer with LPDDR4X RAM, eMMC, microSD, one Gigabit Ethernet port (YT8531 PHY), HDMI 2.1, DisplayPort over USB-C, M.2 PCIe 2.0 x1, USB 2.0 and 3.0 host ports, an ES8388 audio codec with headphone amplifier, a MIPI CSI camera connector, an IR receiver, a PWM controlled fan, ADC keys and a 40-pin GPIO header. The GbE MAC receives its reference clock from the PHY, and the PHY keeps its clock output enabled while the link is down so that the MAC can be initialised. The MDIO bus is described with separate mdio and mdio-child nodes, and the RK3588S RGMII delays are applied on the MAC side (tx_delay). Signed-off-by: BG9OXA <bg9oxa@163.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588s-quarkpi-ca2.dts | 1149 +++++++++++++++++ 2 files changed, 1150 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index e7936a21c..34423e8cf 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -231,6 +231,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-lubancat-4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-quarkpi-ca2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts new file mode 100644 index 000000000..3f971ff8a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts @@ -0,0 +1,1149 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/media/video-interfaces.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/thermal/thermal.h> +#include "rk3588s.dtsi" +/ { + model = "Alientek QuarkPI-CA2"; + compatible = "alientek,quarkpi-ca2", "rockchip,rk3588s"; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops: ramoops@118000 { + compatible = "ramoops"; + reg = <0 0x118000 0 0xd8000>; + console-size = <0x80000>; + ftrace-size = <0x00000>; + pmsg-size = <0x30000>; + record-size = <0x14000>; + }; + }; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + ethernet0 = &gmac1; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-vol-up { + label = "volume up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17000>; + }; + + button-vol-down { + label = "volume down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <417000>; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + work_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_pin>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + pwms = <&pwm7 0 50000 0>; + cooling-levels = <0 50 100 150 200 255>; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_3v3_sd_s0: vcc-3v3-sd-s0 { + compatible = "regulator-fixed"; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_s0_pwr>; + regulator-name = "vcc_3v3_sd_s0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + gpio-controller; + #gpio-cells = <2>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vcc_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m0_xfer>; + status = "okay"; + + vdd_npu_s0: vdd_npu_mem_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + husb311: husb311@4e { + status = "okay"; + compatible = "hynetek,husb311", "richtek,rt1711h"; + reg = <0x4e>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&vbus5v0_typec>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <0x401912c>; + sink-pdos = <0x4019064>; + op-sink-microwatt = <1000000>; + + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0xffffffff>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_hs: endpoint { + remote-endpoint = <&usb_host0_hs_ep>; + }; + }; + + port@1 { + reg = <1>; + usbc0_ss: endpoint { + remote-endpoint = <&usb_host0_ss_ep>; + }; + }; + + port@2 { + reg = <2>; + usbc0_sbu: endpoint { + remote-endpoint = <&usbdp_phy0_dp_out>; + }; + }; + }; + }; + }; + }; + + &cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; + mem-supply = <&vdd_cpu_lit_mem_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; + mem-supply = <&vdd_cpu_lit_mem_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; + mem-supply = <&vdd_cpu_lit_mem_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; + mem-supply = <&vdd_cpu_lit_mem_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; + mem-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; + mem-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; + mem-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; + mem-supply = <&vdd_cpu_big1_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&rknn_core_0 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_mem_s0>; + status = "okay"; +}; + +&rknn_core_1 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_mem_s0>; + status = "okay"; +}; + +&rknn_core_2 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_mem_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_1v8_s3>; + status = "okay"; +}; + +&sdmmc { + max-frequency = <150000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&gmac1 { + phy-mode = "rgmii"; + clock_in_out = "input"; + + snps,reset-gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 20000 100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus + &gmac1_clkinout>; + + tx_delay = <0x2f>; + rx_delay = <0x00>; + + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + }; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&pwm7 { + pinctrl-0 = <&pwm7m0_pins>; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8_s0>; +}; + +&tsadc { + status = "okay"; +}; + +&pinctrl { + sdmmc { + sd_s0_pwr: sd-s0-pwr { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie2x1l2_perstn: pcie2x1l2-perstn { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + typec5v_pwren: typec5v-pwren { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbc0_int: usbc0-int { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_pin: work-led-pin { + rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&package_thermal { + polling-delay = <1000>; + + trips { + fan_trip0: fan-trip0 { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + fan_trip1: fan-trip1 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + fan_trip2: fan-trip2 { + temperature = <60000>; + hysteresis = <2000>; + type = "active"; + }; + + fan_trip3: fan-trip3 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + + fan_trip4: fan-trip4 { + temperature = <70000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&fan_trip0>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map1 { + trip = <&fan_trip1>; + cooling-device = <&fan 1 2>; + }; + + map2 { + trip = <&fan_trip2>; + cooling-device = <&fan 2 3>; + }; + + map3 { + trip = <&fan_trip3>; + cooling-device = <&fan 3 4>; + }; + + map4 { + trip = <&fan_trip4>; + cooling-device = <&fan 4 THERMAL_NO_LIMIT>; + }; + }; +}; + +&hdmi0 { + frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd + &hdmim0_tx0_scl &hdmim0_tx0_sda>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdptxphy0 { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; + +&i2s5_8ch { + status = "okay"; +}; + +&hdmi0_sound { + status = "okay"; +}; + +&sata0 { + status = "disabled"; +}; + +&combphy0_ps { + status = "okay"; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2x1l2_perstn>; + reset-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_s3>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&usb_host2_xhci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_host0_hs_ep: endpoint { + remote-endpoint = <&usbc0_hs>; + }; + }; + + port@1 { + reg = <1>; + usb_host0_ss_ep: endpoint { + remote-endpoint = <&usbc0_ss>; + }; + }; + }; +}; + +/ { + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + vbus5v0_typec: vbus5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc5v0_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1m4_xfer>; + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388", "everest,es8328"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT_TO_IO>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + AVDD-supply = <&vcc_3v3_s0>; + DVDD-supply = <&vcc_1v8_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + #sound-dai-cells = <0>; + }; + }; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck &i2s0_mclk &i2s0_sclk &i2s0_sdi0 &i2s0_sdo0>; + status = "okay"; +}; + +&pinctrl { + headphone { + hp_det: hp-det { + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hp_con: hp-con { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +/ { + analog_sound: analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det &hp_con>; + simple-audio-card,name = "QuarkPi-CA2 ES8388"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_cpu>; + simple-audio-card,frame-master = <&sound_cpu>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,aux-devs = <&hp_amp>; + simple-audio-card,hp-det-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; + simple-audio-card,pin-switches = "Headphones"; + simple-audio-card,widgets = + "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Microphone", "Main Mic"; + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "Headphones", "Headphone Power OUTL", + "Headphones", "Headphone Power OUTR", + "Headphone Power INL", "LOUT1", + "Headphone Power INR", "ROUT1", + "Headphone Power INL", "LOUT2", + "Headphone Power INR", "ROUT2", + "LINPUT1", "Headset Mic", + "LINPUT2", "Main Mic", + "RINPUT1", "Headset Mic", + "RINPUT2", "Main Mic"; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + hp_amp: audio-amplifier-hp { + compatible = "simple-audio-amplifier"; + sound-name-prefix = "Headphone Power"; + enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m1_xfer>; + status = "okay"; +}; + + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5m1_xfer>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0m3_pins>, <&spi0m3_cs0>, <&spi0m3_cs1>; + num-cs = <2>; + status = "okay"; + +}; + +&rga3_core0 {}; + +&rga3_core1 {}; + +&pinctrl { + ir { + ir_receiver_pin: ir-receiver-pin { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + + +&{/} { + ir_receiver: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_receiver_pin>; + }; +}; + + +&dp0 { + status = "okay"; +}; + +&dp0_in { + dp0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dp0>; + }; +}; + +&dp0_out { + dp0_out_con: endpoint { + remote-endpoint = <&usbdp_phy0_dp_in>; + }; +}; + +&vp1 { + vp1_out_dp0: endpoint@a { + reg = <ROCKCHIP_VOP2_EP_DP0>; + remote-endpoint = <&dp0_in_vp1>; + }; +}; + +&usbdp_phy0 { + orientation-switch; + mode-switch; + sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + rockchip,dp-lane-mux = <2 3>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy0_dp_in: endpoint@2 { + reg = <2>; + remote-endpoint = <&dp0_out_con>; + }; + + usbdp_phy0_dp_out: endpoint@3 { + reg = <3>; + remote-endpoint = <&usbc0_sbu>; + }; + }; +}; -- 2.47.3 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: rockchip: add ALIENTEK QuarkPi-CA2 2026-10-01 13:16 ` BG9OXA (?) @ 2026-10-01 13:33 ` sashiko-bot -1 siblings, 0 replies; 5+ messages in thread From: sashiko-bot @ 2026-10-01 13:33 UTC (permalink / raw) To: BG9OXA; +Cc: conor+dt, devicetree, robh Thank you for your contribution! Sashiko AI review found 5 potential issue(s) to consider: - [Medium] arm64: dts: rockchip: Type-C SuperSpeed OF graph bypasses USBDP PHY - [Medium] arm64: dts: rockchip: Invalid DAPM routing mixes paths and bypasses amplifier - [Medium] arm64: dts: rockchip: USB Type-C data role mismatch with host controller - [Low] arm64: dts: rockchip: Makefile entries are not alphabetically sorted - [Low] arm64: dts: rockchip: Erroneous brace indentation in I2C nodes -- commit 37d68f4aec1739a1867e904e0086c7d08ca21350 Author: BG9OXA <bg9oxa@163.com> arm64: dts: rockchip: add ALIENTEK QuarkPi-CA2 This patch adds device tree support for the ALIENTEK QuarkPi-CA2, an RK3588S-based single-board computer. It introduces nodes for various hardware components including Ethernet, USB, audio, and display interfaces. > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index e7936a21c1185..34423e8cfbc97 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -231,6 +231,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-lubancat-4.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-quarkpi-ca2.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb [Severity: Low] Does this insertion break the alphabetical sorting of the Makefile? It appears quarkpi is placed between nanopi and odroid, which could lead to future merge conflicts. > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts > new file mode 100644 > index 0000000000000..3f971ff8a6f0d > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3588s-quarkpi-ca2.dts [ ... ] > + usb_con: connector { > + compatible = "usb-c-connector"; > + label = "USB-C"; > + power-role = "dual"; > + data-role = "dual"; > + try-power-role = "sink"; > + source-pdos = <0x401912c>; > + sink-pdos = <0x4019064>; > + op-sink-microwatt = <1000000>; > + > + altmodes { > + displayport { > + svid = /bits/ 16 <0xff01>; > + vdo = <0xffffffff>; > + }; > + }; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + usbc0_hs: endpoint { > + remote-endpoint = <&usb_host0_hs_ep>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + usbc0_ss: endpoint { > + remote-endpoint = <&usb_host0_ss_ep>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + usbc0_sbu: endpoint { > + remote-endpoint = <&usbdp_phy0_dp_out>; > + }; > + }; > + }; > + }; > + }; > + }; [Severity: Low] Are these closing braces aligned correctly? It looks like the husb311 and i2c2 nodes end with misaligned and stacked closing braces, which violates kernel coding style and hurts readability. [ ... ] > +&usb_host0_xhci { > + dr_mode = "host"; > + status = "okay"; [Severity: Medium] Is the dual data-role in the usb_con node compatible with this xHCI controller configuration? The usb_con node claims dual data roles, but the DWC3 controller here is locked to host mode and lacks the usb-role-switch property. Will this cause role swap requests to fail or break device mode functionality? [ ... ] > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1m4_xfer>; > + status = "okay"; > + > + es8388: audio-codec@11 { > + compatible = "everest,es8388", "everest,es8328"; > + reg = <0x11>; > + clocks = <&cru I2S0_8CH_MCLKOUT_TO_IO>; > + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; > + assigned-clock-rates = <12288000>; > + AVDD-supply = <&vcc_3v3_s0>; > + DVDD-supply = <&vcc_1v8_s0>; > + HPVDD-supply = <&vcc_3v3_s0>; > + PVDD-supply = <&vcc_3v3_s0>; > + #sound-dai-cells = <0>; > + }; > + }; [Severity: Low] Is this closing brace for the i2c1 node indented correctly? It appears misaligned, which affects the readability of the device tree file. [ ... ] > + simple-audio-card,routing = > + "Headphones", "LOUT1", > + "Headphones", "ROUT1", > + "Headphones", "Headphone Power OUTL", > + "Headphones", "Headphone Power OUTR", > + "Headphone Power INL", "LOUT1", > + "Headphone Power INR", "ROUT1", > + "Headphone Power INL", "LOUT2", > + "Headphone Power INR", "ROUT2", [Severity: Medium] Does this DAPM routing incorrectly mix paths and bypass the amplifier? This configuration appears to connect Headphones directly to LOUT1/ROUT1 while also connecting them to the amplifier output, bypassing the headphone amplifier. It also shorts the codec outputs LOUT1 and LOUT2 into the amplifier inputs. Could this cause incorrect audio mixing or potential hardware stress? [ ... ] > +&usbdp_phy0 { > + orientation-switch; > + mode-switch; > + sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; > + sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; > + rockchip,dp-lane-mux = <2 3>; > + status = "okay"; > + > + port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + usbdp_phy0_dp_in: endpoint@2 { > + reg = <2>; > + remote-endpoint = <&dp0_out_con>; > + }; [Severity: Medium] Does this SuperSpeed routing bypass the USBDP PHY? Earlier in the file, the Type-C connector's SuperSpeed endpoint (usbc0_ss) is routed directly to usb_host0_ss_ep instead of going through the USBDP PHY. Here, the usbdp_phy0 port node is missing the SuperSpeed endpoints (endpoint@0 and endpoint@1) that should sit between the DWC3 and the Type-C connector. Will this break hardware orientation switching for SuperSpeed lines since the PHY handles the orientation muxing? -- Sashiko AI review · https://sashiko.dev/#/patchset/179086059727.25869.4898747284365209003@163.com?part=2 ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-10-01 13:33 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <179086058377.25869.5809349568462938314@163.com>
2026-10-01 13:16 ` [PATCH v3 1/2] dt-bindings: arm: rockchip: add ALIENTEK QuarkPi-CA2 BG9OXA
2026-10-01 13:16 ` BG9OXA
2026-10-01 13:16 ` [PATCH v3 2/2] arm64: dts: " BG9OXA
2026-10-01 13:16 ` BG9OXA
2026-10-01 13:33 ` sashiko-bot
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.