[PATCH 0/3] net: add SpacemiT K1 EMAC support

[PATCH 0/3] net: add SpacemiT K1 EMAC support

[Zixian Zeng]

This series adds support for the Ethernet MACs integrated in
the SpacemiT K1 SoC, which includes adding a k1_emac driver with
MDIO and PHYLIB support for RGMII and RMII operation, enabling it
in the k1 defconfig, and adding MAINTAINERS coverage on new directory.

The k1_emac driver in series draws upon Vivian Wang's work [1]. To make it
simple and working, driver which using small ring-buffers operates primarily
on polling and only implements basic functions.

Tested on both Banana Pi F3 Ethernet ports with RTL8211F PHYs
at 1000 Mbps full duplex, and tested command: dhcp, ping, tftp, etc.

[1]: https://lore.kernel.org/all/20250914-net-k1-emac-v12-0-65b31b398f44@iscas.ac.cn/

Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
---
Zixian Zeng (3):
      net: k1: add Ethernet MAC driver
      configs: k1: enable Ethernet support
      MAINTAINERS: spacemit: add K1 Ethernet driver

 board/spacemit/k1/MAINTAINERS  |   1 +
 configs/spacemit_k1_defconfig  |   6 +
 drivers/net/Kconfig            |   1 +
 drivers/net/Makefile           |   1 +
 drivers/net/spacemit/Kconfig   |  15 +
 drivers/net/spacemit/Makefile  |   3 +
 drivers/net/spacemit/k1_emac.c | 952 +++++++++++++++++++++++++++++++++++++++++
 7 files changed, 979 insertions(+)
---
base-commit: a000f2af240eaa996cec92f8d44bad96fdf3f898
change-id: 20260926-b4-k1-emac-fa5f2b146f38

Best regards,
--  
Zixian Zeng <sycamoremoon376@gmail.com>

[PATCH 1/3] net: k1: add Ethernet MAC driver

[Zixian Zeng]

Add Ethernet MAC driver support for the SpacemiT K1 SoC. The driver
supports RGMII and RMII interfaces, synchronous transmission, and exposes
the integrated MDIO controller through the MDIO uclass.

The register definitions, descriptor layout, MDIO protocol, RGMII delay
line handling and hardware initialisation sequences are derived from the
mainline Linux commit bfec6d7f2001 (net: spacemit: Add K1 Ethernet MAC).

Link: https://lore.kernel.org/all/20250914-net-k1-emac-v12-0-65b31b398f44@iscas.ac.cn/
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
---
 drivers/net/Kconfig            |   1 +
 drivers/net/Makefile           |   1 +
 drivers/net/spacemit/Kconfig   |  15 +
 drivers/net/spacemit/Makefile  |   3 +
 drivers/net/spacemit/k1_emac.c | 952 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 972 insertions(+)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c057504cf66..7e800742fcc 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1123,6 +1123,7 @@ config MDIO_MUX_MESON_GXL
 source "drivers/net/phy/Kconfig"
 source "drivers/net/pfe_eth/Kconfig"
 source "drivers/net/fsl-mc/Kconfig"
+source "drivers/net/spacemit/Kconfig"
 
 endif # NETDEVICES
 
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 96ec6fb187a..935e4dda394 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -105,6 +105,7 @@ obj-$(CONFIG_SJA1105) += sja1105.o
 obj-$(CONFIG_SMC911X) += smc911x.o
 obj-$(CONFIG_SNI_AVE) += sni_ave.o
 obj-$(CONFIG_SNI_NETSEC) += sni_netsec.o
+obj-$(CONFIG_SPACEMIT_K1_EMAC) += spacemit/
 obj-$(CONFIG_SUN4I_EMAC) += sunxi_emac.o
 obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o
 obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
diff --git a/drivers/net/spacemit/Kconfig b/drivers/net/spacemit/Kconfig
new file mode 100644
index 00000000000..c3955556853
--- /dev/null
+++ b/drivers/net/spacemit/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+config SPACEMIT_K1_EMAC
+	bool "SpacemiT K1 Ethernet MAC support"
+	depends on TARGET_SPACEMIT_K1
+	select DM_DMA
+	select DM_ETH_PHY
+	select DM_MDIO
+	select PHYLIB
+	select PHY_GIGE
+	help
+	  Enable support for the Ethernet MAC integrated in the SpacemiT K1.
+	  The controller supports 10/100/1000 Mbps links through RGMII and
+	  10/100 Mbps links through RMII. Its internal MDIO controller is
+	  exposed through the driver-model MDIO uclass.
diff --git a/drivers/net/spacemit/Makefile b/drivers/net/spacemit/Makefile
new file mode 100644
index 00000000000..ca595ddfc9a
--- /dev/null
+++ b/drivers/net/spacemit/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-$(CONFIG_SPACEMIT_K1_EMAC) += k1_emac.o
diff --git a/drivers/net/spacemit/k1_emac.c b/drivers/net/spacemit/k1_emac.c
new file mode 100644
index 00000000000..ba6167eede3
--- /dev/null
+++ b/drivers/net/spacemit/k1_emac.c
@@ -0,0 +1,952 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SpacemiT K1 Ethernet MAC driver
+ *
+ * Copyright (C) 2023-2025 SpacemiT (Hangzhou) Technology Co. Ltd
+ * Copyright (C) 2025 Vivian Wang <wangruikang@iscas.ac.cn>
+ * Copyright (C) 2026 Zixian Zeng <sycamoremoon376@gmail.com>
+ */
+
+#include <clk.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <dm/lists.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <net.h>
+#include <phys2bus.h>
+#include <regmap.h>
+#include <reset.h>
+#include <wait_bit.h>
+#include <asm/barrier.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+
+/* APMU syscon registers */
+#define K1_APMU_EMAC_CTRL			0x0
+#define  K1_APMU_PHY_INTF_RGMII			BIT(2)
+#define  K1_APMU_REF_CLK_SEL			BIT(3)
+#define  K1_APMU_RGMII_TX_CLK_SEL		BIT(8)
+#define  K1_APMU_AXI_SINGLE_ID			BIT(13)
+#define K1_APMU_EMAC_DLINE			0x4
+#define  K1_APMU_RX_DLINE_EN			BIT(0)
+#define  K1_APMU_RX_DLINE_STEP			GENMASK(5, 4)
+#define  K1_APMU_RX_DLINE_CODE			GENMASK(15, 8)
+#define  K1_APMU_TX_DLINE_EN			BIT(16)
+#define  K1_APMU_TX_DLINE_STEP			GENMASK(21, 20)
+#define  K1_APMU_TX_DLINE_CODE			GENMASK(31, 24)
+
+/* DMA registers */
+#define K1_DMA_CONFIG				0x000
+#define  K1_DMA_CONFIG_SW_RESET			BIT(0)
+#define  K1_DMA_CONFIG_BURST_16			BIT(5)
+#define  K1_DMA_CONFIG_STRICT_BURST		BIT(17)
+#define  K1_DMA_CONFIG_64BIT_MODE		BIT(18)
+#define K1_DMA_CONTROL				0x004
+#define  K1_DMA_CONTROL_TX_START		BIT(0)
+#define  K1_DMA_CONTROL_RX_START		BIT(1)
+#define K1_DMA_STATUS				0x008
+#define  K1_DMA_STATUS_TX_DESC_UNAVAILABLE	BIT(1)
+#define K1_DMA_INTERRUPT_ENABLE			0x00c
+#define K1_DMA_TX_AUTO_POLL			0x010
+#define K1_DMA_TX_POLL_DEMAND			0x014
+#define K1_DMA_RX_POLL_DEMAND			0x018
+#define K1_DMA_TX_DESC_BASE			0x01c
+#define K1_DMA_RX_DESC_BASE			0x020
+
+/* MAC registers */
+#define K1_MAC_GLOBAL_CONTROL			0x100
+#define  K1_MAC_SPEED				GENMASK(1, 0)
+#define  K1_MAC_SPEED_10			0
+#define  K1_MAC_SPEED_100			BIT(0)
+#define  K1_MAC_SPEED_1000			BIT(1)
+#define  K1_MAC_FULL_DUPLEX			BIT(2)
+#define K1_MAC_TX_CONTROL			0x104
+#define  K1_MAC_TX_ENABLE			BIT(0)
+#define  K1_MAC_TX_AUTO_RETRY			BIT(3)
+#define  K1_MAC_TX_IFG				GENMASK(6, 4)
+#define K1_MAC_RX_CONTROL			0x108
+#define  K1_MAC_RX_ENABLE			BIT(0)
+#define  K1_MAC_RX_STORE_FORWARD		BIT(3)
+#define K1_MAC_MAX_FRAME_SIZE			0x10c
+#define K1_MAC_TX_JABBER_SIZE			0x110
+#define K1_MAC_RX_JABBER_SIZE			0x114
+#define K1_MAC_ADDRESS_CONTROL			0x118
+#define  K1_MAC_ADDRESS1_ENABLE			BIT(0)
+#define K1_MAC_ADDRESS1_HIGH			0x120
+#define K1_MAC_ADDRESS1_MED			0x124
+#define K1_MAC_ADDRESS1_LOW			0x128
+#define K1_MAC_MULTICAST_HASH1			0x150
+#define K1_MAC_MULTICAST_HASH2			0x154
+#define K1_MAC_MULTICAST_HASH3			0x158
+#define K1_MAC_MULTICAST_HASH4			0x15c
+#define K1_MAC_MDIO_CONTROL			0x1a0
+#define  K1_MAC_MDIO_PHY_ADDR			GENMASK(4, 0)
+#define  K1_MAC_MDIO_REG_ADDR			GENMASK(9, 5)
+#define  K1_MAC_MDIO_READ			BIT(10)
+#define  K1_MAC_MDIO_START			BIT(15)
+#define K1_MAC_MDIO_DATA			0x1a4
+#define K1_MAC_TX_FIFO_ALMOST_FULL		0x1c0
+#define K1_MAC_TX_PACKET_THRESHOLD		0x1c4
+#define K1_MAC_RX_PACKET_THRESHOLD		0x1c8
+#define K1_MAC_INTERRUPT_ENABLE			0x1e4
+
+/* Receive DMA descriptor */
+#define K1_RX_DESC_FRAME_LEN			GENMASK(13, 0)
+#define K1_RX_DESC_ALIGN_ERR			BIT(14)
+#define K1_RX_DESC_RUNT				BIT(15)
+#define K1_RX_DESC_CRC_ERR			BIT(20)
+#define K1_RX_DESC_MAX_LEN_ERR			BIT(21)
+#define K1_RX_DESC_JABBER_ERR			BIT(22)
+#define K1_RX_DESC_LENGTH_ERR			BIT(23)
+#define K1_RX_DESC_LAST				BIT(29)
+#define K1_RX_DESC_FIRST			BIT(30)
+#define K1_RX_DESC_OWN				BIT(31)
+#define K1_RX_DESC_BUFFER_SIZE			GENMASK(11, 0)
+#define K1_RX_DESC_END_RING			BIT(26)
+
+/* Transmit DMA descriptor */
+#define K1_TX_DESC_OWN				BIT(31)
+#define K1_TX_DESC_BUFFER_SIZE			GENMASK(11, 0)
+#define K1_TX_DESC_END_RING			BIT(26)
+#define K1_TX_DESC_FIRST			BIT(29)
+#define K1_TX_DESC_LAST				BIT(30)
+
+#define K1_TX_DESC_COUNT			4
+#define K1_RX_DESC_COUNT			16
+#define K1_DESC_SIZE				16
+#define K1_DESCS_PER_CACHELINE			(ARCH_DMA_MINALIGN / K1_DESC_SIZE)
+#define K1_TX_DESC_ALLOC_SIZE			ALIGN(K1_TX_DESC_COUNT * \
+							K1_DESC_SIZE, \
+							ARCH_DMA_MINALIGN)
+#define K1_RX_DESC_ALLOC_SIZE			ALIGN(K1_RX_DESC_COUNT * \
+							K1_DESC_SIZE, \
+							ARCH_DMA_MINALIGN)
+#define K1_DMA_BUF_SIZE				ALIGN(PKTSIZE_ALIGN, ARCH_DMA_MINALIGN)
+#define K1_MDIO_TIMEOUT_MS			10
+#define K1_TX_TIMEOUT_MS			1000
+
+/* The delay line is programmed in 15.6 ps steps. */
+#define K1_DLINE_STEP_PS_X10			156
+#define K1_DLINE_MAX_CODE			(FIELD_MAX(K1_APMU_TX_DLINE_CODE) - 1)
+
+/* Tuning values recommended by SpacemiT. */
+#define K1_TX_FIFO_ALMOST_FULL_DEFAULT		0x1f8
+#define K1_TX_PACKET_THRESHOLD_DEFAULT		1518
+#define K1_RX_PACKET_THRESHOLD_DEFAULT		12
+
+#define K1_RX_DESC_ERRORS			(K1_RX_DESC_ALIGN_ERR | \
+							K1_RX_DESC_RUNT | K1_RX_DESC_CRC_ERR | \
+							K1_RX_DESC_MAX_LEN_ERR | \
+							K1_RX_DESC_JABBER_ERR | \
+							K1_RX_DESC_LENGTH_ERR)
+
+struct k1_emac_desc {
+	u32 status;
+	u32 control;
+	u32 buffer_addr1;
+	u32 buffer_addr2;
+};
+
+struct k1_emac_priv {
+	void __iomem *base;
+	struct regmap *apmu;
+	u32 apmu_offset;
+	phy_interface_t interface;
+	u32 max_speed;
+	u32 tx_delay_code;
+	u32 rx_delay_code;
+	struct clk clk;
+	struct reset_ctl reset;
+	struct phy_device *phy;
+	struct k1_emac_desc *tx_desc;
+	struct k1_emac_desc *rx_desc;
+	u8 *tx_buf;
+	u8 *rx_buf;
+	u32 tx_desc_dma;
+	u32 rx_desc_dma;
+	u32 tx_buf_dma[K1_TX_DESC_COUNT];
+	u32 rx_buf_dma[K1_RX_DESC_COUNT];
+	u32 tx_index;
+	u32 rx_index;
+	char mdio_name[MDIO_NAME_LEN];
+	bool rx_pending;
+	bool clk_enabled;
+	bool reset_deasserted;
+};
+
+static inline struct k1_emac_desc *k1_desc_at(struct k1_emac_desc *ring,
+					      unsigned int index)
+{
+	return &ring[index];
+}
+
+static inline u8 *k1_rx_buf_at(struct k1_emac_priv *priv, unsigned int index)
+{
+	return priv->rx_buf + index * K1_DMA_BUF_SIZE;
+}
+
+static inline u8 *k1_tx_buf_at(struct k1_emac_priv *priv, unsigned int index)
+{
+	return priv->tx_buf + index * K1_DMA_BUF_SIZE;
+}
+
+static void k1_desc_flush(struct k1_emac_desc *desc)
+{
+	ulong start = ALIGN_DOWN((ulong)desc, ARCH_DMA_MINALIGN);
+
+	flush_dcache_range(start, start + ARCH_DMA_MINALIGN);
+	/* Complete the clean before notifying the DMA engine. */
+	mb();
+}
+
+static void k1_desc_invalidate(struct k1_emac_desc *desc)
+{
+	ulong start = ALIGN_DOWN((ulong)desc, ARCH_DMA_MINALIGN);
+
+	invalidate_dcache_range(start, start + ARCH_DMA_MINALIGN);
+	/* Complete the invalidation before inspecting DMA-written fields. */
+	mb();
+}
+
+static void k1_buffer_flush(void *buffer)
+{
+	flush_dcache_range((ulong)buffer, (ulong)buffer + K1_DMA_BUF_SIZE);
+}
+
+static void k1_buffer_invalidate(void *buffer)
+{
+	invalidate_dcache_range((ulong)buffer, (ulong)buffer + K1_DMA_BUF_SIZE);
+}
+
+static bool k1_interface_is_rgmii(phy_interface_t interface)
+{
+	return interface == PHY_INTERFACE_MODE_RGMII ||
+	       interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	       interface == PHY_INTERFACE_MODE_RGMII_RXID ||
+	       interface == PHY_INTERFACE_MODE_RGMII_TXID;
+}
+
+static u32 k1_emac_delay_ps_to_code(u32 delay_ps)
+{
+	return DIV_ROUND_CLOSEST(delay_ps * 10, K1_DLINE_STEP_PS_X10);
+}
+
+static u32 k1_emac_delay_code_to_ps(u32 delay_code)
+{
+	return DIV_ROUND_CLOSEST(delay_code * K1_DLINE_STEP_PS_X10, 10);
+}
+
+static int k1_emac_read_delay(struct udevice *dev, const char *property,
+			      u32 *delay_code)
+{
+	u32 max_delay_ps = k1_emac_delay_code_to_ps(K1_DLINE_MAX_CODE);
+	u32 delay_ps = dev_read_u32_default(dev, property, 0);
+
+	if (delay_ps > max_delay_ps) {
+		dev_err(dev, "%s exceeds the maximum of %u ps: %u ps\n",
+			property, max_delay_ps, delay_ps);
+		return -EINVAL;
+	}
+
+	*delay_code = k1_emac_delay_ps_to_code(delay_ps);
+	return 0;
+}
+
+static int k1_emac_dma32(struct udevice *dev, void *ptr, u32 *address)
+{
+	dma_addr_t dma = dev_phys_to_bus(dev, virt_to_phys(ptr));
+
+	if (upper_32_bits(dma)) {
+		dev_err(dev, "DMA address %llx is outside the 32-bit window\n",
+			(unsigned long long)dma);
+		return -ERANGE;
+	}
+
+	*address = lower_32_bits(dma);
+	return 0;
+}
+
+static int k1_emac_config_interface(struct k1_emac_priv *priv)
+{
+	u32 ctrl_mask = K1_APMU_REF_CLK_SEL | K1_APMU_RGMII_TX_CLK_SEL |
+			K1_APMU_PHY_INTF_RGMII;
+	u32 dline_mask = K1_APMU_RX_DLINE_EN | K1_APMU_RX_DLINE_STEP |
+			 K1_APMU_RX_DLINE_CODE | K1_APMU_TX_DLINE_EN |
+			 K1_APMU_TX_DLINE_STEP | K1_APMU_TX_DLINE_CODE;
+	u32 ctrl = 0, dline = 0;
+	int ret;
+
+	if (k1_interface_is_rgmii(priv->interface)) {
+		ctrl = K1_APMU_PHY_INTF_RGMII;
+		dline = K1_APMU_RX_DLINE_EN |
+			 FIELD_PREP(K1_APMU_RX_DLINE_CODE,
+				    priv->rx_delay_code) |
+			 K1_APMU_TX_DLINE_EN |
+			 FIELD_PREP(K1_APMU_TX_DLINE_CODE,
+				    priv->tx_delay_code);
+	}
+
+	ret = regmap_update_bits(priv->apmu, priv->apmu_offset + K1_APMU_EMAC_CTRL,
+				 ctrl_mask, ctrl);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(priv->apmu,
+				  priv->apmu_offset + K1_APMU_EMAC_DLINE,
+				  dline_mask, dline);
+}
+
+static int k1_emac_write_hwaddr(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev_get_plat(dev);
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+	const u8 *addr = pdata->enetaddr;
+
+	writel(addr[1] << 8 | addr[0], priv->base + K1_MAC_ADDRESS1_HIGH);
+	writel(addr[3] << 8 | addr[2], priv->base + K1_MAC_ADDRESS1_MED);
+	writel(addr[5] << 8 | addr[4], priv->base + K1_MAC_ADDRESS1_LOW);
+
+	return 0;
+}
+
+static int k1_emac_hw_init(struct k1_emac_priv *priv)
+{
+	u32 config;
+	int ret;
+
+	writel(0, priv->base + K1_MAC_INTERRUPT_ENABLE);
+	writel(0, priv->base + K1_DMA_INTERRUPT_ENABLE);
+	writel(0, priv->base + K1_MAC_RX_CONTROL);
+	writel(0, priv->base + K1_MAC_TX_CONTROL);
+	writel(0, priv->base + K1_DMA_CONTROL);
+
+	ret = regmap_update_bits(priv->apmu,
+				 priv->apmu_offset + K1_APMU_EMAC_CTRL,
+				 K1_APMU_AXI_SINGLE_ID, K1_APMU_AXI_SINGLE_ID);
+	if (ret)
+		return ret;
+
+	writel(K1_MAC_ADDRESS1_ENABLE, priv->base + K1_MAC_ADDRESS_CONTROL);
+	writel(0, priv->base + K1_MAC_MULTICAST_HASH1);
+	writel(0, priv->base + K1_MAC_MULTICAST_HASH2);
+	writel(0, priv->base + K1_MAC_MULTICAST_HASH3);
+	writel(0, priv->base + K1_MAC_MULTICAST_HASH4);
+	writel(K1_TX_FIFO_ALMOST_FULL_DEFAULT,
+	       priv->base + K1_MAC_TX_FIFO_ALMOST_FULL);
+	writel(K1_TX_PACKET_THRESHOLD_DEFAULT,
+	       priv->base + K1_MAC_TX_PACKET_THRESHOLD);
+	writel(K1_RX_PACKET_THRESHOLD_DEFAULT,
+	       priv->base + K1_MAC_RX_PACKET_THRESHOLD);
+	writel(K1_DMA_BUF_SIZE, priv->base + K1_MAC_MAX_FRAME_SIZE);
+	writel(K1_DMA_BUF_SIZE, priv->base + K1_MAC_TX_JABBER_SIZE);
+	writel(K1_DMA_BUF_SIZE, priv->base + K1_MAC_RX_JABBER_SIZE);
+
+	writel(K1_DMA_CONFIG_SW_RESET, priv->base + K1_DMA_CONFIG);
+	mdelay(10);
+	writel(0, priv->base + K1_DMA_CONFIG);
+	mdelay(10);
+
+	config = K1_DMA_CONFIG_STRICT_BURST | K1_DMA_CONFIG_64BIT_MODE |
+		 K1_DMA_CONFIG_BURST_16;
+	writel(config, priv->base + K1_DMA_CONFIG);
+
+	return 0;
+}
+
+static int k1_emac_adjust_link(struct udevice *dev)
+{
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+	u32 value = readl(priv->base + K1_MAC_GLOBAL_CONTROL);
+
+	value &= ~(K1_MAC_SPEED | K1_MAC_FULL_DUPLEX);
+	if (priv->phy->duplex == DUPLEX_FULL)
+		value |= K1_MAC_FULL_DUPLEX;
+
+	switch (priv->phy->speed) {
+	case SPEED_1000:
+		value |= K1_MAC_SPEED_1000;
+		break;
+	case SPEED_100:
+		value |= K1_MAC_SPEED_100;
+		break;
+	case SPEED_10:
+		value |= K1_MAC_SPEED_10;
+		break;
+	default:
+		dev_err(dev, "unsupported link speed %d\n", priv->phy->speed);
+		return -EINVAL;
+	}
+
+	writel(value, priv->base + K1_MAC_GLOBAL_CONTROL);
+	return 0;
+}
+
+static void k1_emac_prepare_rx(struct k1_emac_priv *priv, unsigned int index)
+{
+	struct k1_emac_desc *desc = k1_desc_at(priv->rx_desc, index);
+	u8 *buffer = k1_rx_buf_at(priv, index);
+
+	k1_buffer_flush(buffer);
+	desc->control = FIELD_PREP(K1_RX_DESC_BUFFER_SIZE, K1_DMA_BUF_SIZE);
+	if (index == K1_RX_DESC_COUNT - 1)
+		desc->control |= K1_RX_DESC_END_RING;
+	desc->buffer_addr1 = priv->rx_buf_dma[index];
+	desc->buffer_addr2 = 0;
+	desc->status = K1_RX_DESC_OWN;
+}
+
+static void k1_emac_advance_rx(struct k1_emac_priv *priv)
+{
+	unsigned int index = priv->rx_index;
+	unsigned int first;
+
+	/*
+	 * Multiple 16-byte descriptors share a cache line. Do not clean that
+	 * line while DMA may still be updating another descriptor in it. Return
+	 * descriptors to DMA only after the complete cache-line-sized group has
+	 * been consumed.
+	 */
+	if (!((index + 1) % K1_DESCS_PER_CACHELINE)) {
+		first = index + 1 - K1_DESCS_PER_CACHELINE;
+		for (; first <= index; first++)
+			k1_emac_prepare_rx(priv, first);
+
+		/* Complete descriptor stores before cleaning the cache line. */
+		mb();
+		k1_desc_flush(k1_desc_at(priv->rx_desc, index));
+		writel(1, priv->base + K1_DMA_RX_POLL_DEMAND);
+	}
+
+	priv->rx_index = (index + 1) % K1_RX_DESC_COUNT;
+}
+
+static void k1_emac_init_rings(struct k1_emac_priv *priv)
+{
+	struct k1_emac_desc *desc;
+	unsigned int i;
+
+	memset(priv->tx_desc, 0, K1_TX_DESC_ALLOC_SIZE);
+	memset(priv->rx_desc, 0, K1_RX_DESC_ALLOC_SIZE);
+	memset(priv->tx_buf, 0, K1_TX_DESC_COUNT * K1_DMA_BUF_SIZE);
+	memset(priv->rx_buf, 0, K1_RX_DESC_COUNT * K1_DMA_BUF_SIZE);
+	flush_dcache_range((ulong)priv->tx_buf,
+			   (ulong)priv->tx_buf +
+			   K1_TX_DESC_COUNT * K1_DMA_BUF_SIZE);
+	flush_dcache_range((ulong)priv->rx_buf,
+			   (ulong)priv->rx_buf + K1_RX_DESC_COUNT * K1_DMA_BUF_SIZE);
+
+	for (i = 0; i < K1_TX_DESC_COUNT; i++) {
+		desc = k1_desc_at(priv->tx_desc, i);
+		if (i == K1_TX_DESC_COUNT - 1)
+			desc->control = K1_TX_DESC_END_RING;
+		desc->buffer_addr1 = priv->tx_buf_dma[i];
+	}
+	flush_dcache_range((ulong)priv->tx_desc,
+			   (ulong)priv->tx_desc + K1_TX_DESC_ALLOC_SIZE);
+
+	for (i = 0; i < K1_RX_DESC_COUNT; i++)
+		k1_emac_prepare_rx(priv, i);
+	/* Complete all descriptor stores before handing the ring to DMA. */
+	mb();
+	flush_dcache_range((ulong)priv->rx_desc,
+			   (ulong)priv->rx_desc + K1_RX_DESC_ALLOC_SIZE);
+	/* Complete the clean before programming the DMA descriptor base. */
+	mb();
+
+	priv->tx_index = 0;
+	priv->rx_index = 0;
+	priv->rx_pending = false;
+}
+
+static int k1_emac_start(struct udevice *dev)
+{
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+	u32 value;
+	int ret;
+
+	ret = phy_startup(priv->phy);
+	if (ret)
+		return ret;
+
+	if (!priv->phy->link) {
+		dev_err(dev, "no link\n");
+		phy_shutdown(priv->phy);
+		return -EAGAIN;
+	}
+
+	ret = k1_emac_hw_init(priv);
+	if (ret)
+		goto err_phy;
+
+	ret = k1_emac_write_hwaddr(dev);
+	if (ret)
+		goto err_phy;
+
+	k1_emac_init_rings(priv);
+	writel(priv->tx_desc_dma, priv->base + K1_DMA_TX_DESC_BASE);
+	writel(priv->rx_desc_dma, priv->base + K1_DMA_RX_DESC_BASE);
+
+	ret = k1_emac_adjust_link(dev);
+	if (ret)
+		goto err_stop;
+
+	value = readl(priv->base + K1_MAC_TX_CONTROL);
+	value &= ~K1_MAC_TX_IFG;
+	value |= K1_MAC_TX_ENABLE | K1_MAC_TX_AUTO_RETRY;
+	writel(value, priv->base + K1_MAC_TX_CONTROL);
+	writel(0, priv->base + K1_DMA_TX_AUTO_POLL);
+	writel(K1_MAC_RX_ENABLE | K1_MAC_RX_STORE_FORWARD,
+	       priv->base + K1_MAC_RX_CONTROL);
+	writel(K1_DMA_CONTROL_TX_START | K1_DMA_CONTROL_RX_START,
+	       priv->base + K1_DMA_CONTROL);
+	writel(1, priv->base + K1_DMA_RX_POLL_DEMAND);
+
+	printf("%s: %d Mbps %s-duplex link up\n", dev->name, priv->phy->speed,
+	       priv->phy->duplex == DUPLEX_FULL ? "full" : "half");
+	return 0;
+
+err_stop:
+	writel(0, priv->base + K1_DMA_CONTROL);
+	writel(0, priv->base + K1_MAC_RX_CONTROL);
+	writel(0, priv->base + K1_MAC_TX_CONTROL);
+err_phy:
+	phy_shutdown(priv->phy);
+	return ret;
+}
+
+static int k1_emac_send(struct udevice *dev, void *packet, int length)
+{
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+	unsigned int index = priv->tx_index;
+	struct k1_emac_desc *desc = k1_desc_at(priv->tx_desc, index);
+	u8 *buffer = k1_tx_buf_at(priv, index);
+	ulong start;
+
+	if (length <= 0 || length > K1_DMA_BUF_SIZE)
+		return -EMSGSIZE;
+
+	k1_desc_invalidate(desc);
+	if (desc->status & K1_TX_DESC_OWN)
+		return -EBUSY;
+
+	memcpy(buffer, packet, length);
+	flush_dcache_range((ulong)buffer,
+			   ALIGN((ulong)buffer + length, ARCH_DMA_MINALIGN));
+
+	/* Clear stale state before handing the descriptor to DMA. */
+	writel(K1_DMA_STATUS_TX_DESC_UNAVAILABLE, priv->base + K1_DMA_STATUS);
+	/* Complete the W1C write before asking the DMA engine to resume. */
+	readl(priv->base + K1_DMA_STATUS);
+
+	desc->buffer_addr1 = priv->tx_buf_dma[index];
+	desc->buffer_addr2 = 0;
+	desc->control = FIELD_PREP(K1_TX_DESC_BUFFER_SIZE, length) |
+			K1_TX_DESC_FIRST | K1_TX_DESC_LAST;
+	if (index == K1_TX_DESC_COUNT - 1)
+		desc->control |= K1_TX_DESC_END_RING;
+	desc->status = K1_TX_DESC_OWN;
+	/* Complete descriptor stores before cleaning its cache line. */
+	mb();
+	k1_desc_flush(desc);
+	writel(1, priv->base + K1_DMA_TX_POLL_DEMAND);
+
+	start = get_timer(0);
+	do {
+		k1_desc_invalidate(desc);
+		/*
+		 * OWN is cleared before transmission finishes. Descriptor
+		 * unavailable is raised after DMA completes the packet and moves
+		 * to the next CPU-owned descriptor.
+		 */
+		if (!(desc->status & K1_TX_DESC_OWN) &&
+		    (readl(priv->base + K1_DMA_STATUS) &
+		     K1_DMA_STATUS_TX_DESC_UNAVAILABLE)) {
+			priv->tx_index = (index + 1) % K1_TX_DESC_COUNT;
+			return 0;
+		}
+		udelay(10);
+	} while (get_timer(start) <= K1_TX_TIMEOUT_MS);
+
+	dev_err(dev, "transmit timed out (DMA status %#x)\n",
+		readl(priv->base + K1_DMA_STATUS));
+	return -ETIMEDOUT;
+}
+
+static int k1_emac_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+	struct k1_emac_desc *desc;
+	u32 status, length;
+	u8 *buffer;
+	unsigned int checked = 0;
+
+	if (priv->rx_pending)
+		return -EBUSY;
+
+	while (checked++ < K1_RX_DESC_COUNT) {
+		desc = k1_desc_at(priv->rx_desc, priv->rx_index);
+		k1_desc_invalidate(desc);
+		status = desc->status;
+		if (status & K1_RX_DESC_OWN)
+			return -EAGAIN;
+
+		length = FIELD_GET(K1_RX_DESC_FRAME_LEN, status);
+		if ((status & (K1_RX_DESC_FIRST | K1_RX_DESC_LAST)) ==
+		    (K1_RX_DESC_FIRST | K1_RX_DESC_LAST) &&
+		    !(status & K1_RX_DESC_ERRORS) && length > ETH_FCS_LEN &&
+		    length <= K1_DMA_BUF_SIZE) {
+			buffer = k1_rx_buf_at(priv, priv->rx_index);
+			k1_buffer_invalidate(buffer);
+			/* Complete invalidation before exposing the received frame. */
+			mb();
+			*packetp = buffer;
+			priv->rx_pending = true;
+			return length - ETH_FCS_LEN;
+		}
+
+		dev_dbg(dev, "discarding RX descriptor %#x, length %u\n",
+			status, length);
+		k1_emac_advance_rx(priv);
+	}
+
+	return -EAGAIN;
+}
+
+static int k1_emac_free_pkt(struct udevice *dev, uchar *packet, int length)
+{
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+
+	if (!priv->rx_pending || packet != k1_rx_buf_at(priv, priv->rx_index))
+		return -EINVAL;
+
+	k1_emac_advance_rx(priv);
+	priv->rx_pending = false;
+
+	return 0;
+}
+
+static void k1_emac_stop(struct udevice *dev)
+{
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+
+	writel(0, priv->base + K1_MAC_INTERRUPT_ENABLE);
+	writel(0, priv->base + K1_DMA_INTERRUPT_ENABLE);
+	writel(0, priv->base + K1_DMA_CONTROL);
+	writel(0, priv->base + K1_MAC_RX_CONTROL);
+	writel(0, priv->base + K1_MAC_TX_CONTROL);
+	priv->rx_pending = false;
+	phy_shutdown(priv->phy);
+}
+
+static int k1_emac_mdio_wait(struct k1_emac_priv *priv)
+{
+	return wait_for_bit_le32(priv->base + K1_MAC_MDIO_CONTROL,
+				 K1_MAC_MDIO_START, false, K1_MDIO_TIMEOUT_MS,
+				 false);
+}
+
+static int k1_emac_mdio_read(struct udevice *mdio_dev, int addr, int devad,
+			     int reg)
+{
+	struct k1_emac_priv *priv = dev_get_priv(mdio_dev->parent);
+	u32 command;
+	int ret;
+
+	if (devad != MDIO_DEVAD_NONE)
+		return -EOPNOTSUPP;
+
+	command = FIELD_PREP(K1_MAC_MDIO_PHY_ADDR, addr) |
+		  FIELD_PREP(K1_MAC_MDIO_REG_ADDR, reg) |
+		  K1_MAC_MDIO_READ | K1_MAC_MDIO_START;
+	writel(0, priv->base + K1_MAC_MDIO_DATA);
+	writel(command, priv->base + K1_MAC_MDIO_CONTROL);
+
+	ret = k1_emac_mdio_wait(priv);
+	if (ret)
+		return ret;
+
+	return readl(priv->base + K1_MAC_MDIO_DATA) & 0xffff;
+}
+
+static int k1_emac_mdio_write(struct udevice *mdio_dev, int addr, int devad,
+			      int reg, u16 value)
+{
+	struct k1_emac_priv *priv = dev_get_priv(mdio_dev->parent);
+	u32 command;
+
+	if (devad != MDIO_DEVAD_NONE)
+		return -EOPNOTSUPP;
+
+	writel(value, priv->base + K1_MAC_MDIO_DATA);
+	command = FIELD_PREP(K1_MAC_MDIO_PHY_ADDR, addr) |
+		  FIELD_PREP(K1_MAC_MDIO_REG_ADDR, reg) |
+		  K1_MAC_MDIO_START;
+	writel(command, priv->base + K1_MAC_MDIO_CONTROL);
+
+	return k1_emac_mdio_wait(priv);
+}
+
+static const struct mdio_ops k1_emac_mdio_ops = {
+	.read = k1_emac_mdio_read,
+	.write = k1_emac_mdio_write,
+};
+
+U_BOOT_DRIVER(k1_emac_mdio) = {
+	.name = "spacemit_k1_emac_mdio",
+	.id = UCLASS_MDIO,
+	.ops = &k1_emac_mdio_ops,
+};
+
+static int k1_emac_alloc_dma(struct udevice *dev)
+{
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+	unsigned int i;
+	int ret;
+
+	priv->tx_desc = memalign(ARCH_DMA_MINALIGN, K1_TX_DESC_ALLOC_SIZE);
+	priv->rx_desc = memalign(ARCH_DMA_MINALIGN, K1_RX_DESC_ALLOC_SIZE);
+	priv->tx_buf = memalign(ARCH_DMA_MINALIGN,
+				K1_TX_DESC_COUNT * K1_DMA_BUF_SIZE);
+	priv->rx_buf = memalign(ARCH_DMA_MINALIGN,
+				K1_RX_DESC_COUNT * K1_DMA_BUF_SIZE);
+	if (!priv->tx_desc || !priv->rx_desc || !priv->tx_buf || !priv->rx_buf)
+		return -ENOMEM;
+
+	ret = k1_emac_dma32(dev, priv->tx_desc, &priv->tx_desc_dma);
+	if (ret)
+		return ret;
+	ret = k1_emac_dma32(dev, priv->rx_desc, &priv->rx_desc_dma);
+	if (ret)
+		return ret;
+	for (i = 0; i < K1_TX_DESC_COUNT; i++) {
+		ret = k1_emac_dma32(dev, k1_tx_buf_at(priv, i),
+				    &priv->tx_buf_dma[i]);
+		if (ret)
+			return ret;
+	}
+	for (i = 0; i < K1_RX_DESC_COUNT; i++) {
+		ret = k1_emac_dma32(dev, k1_rx_buf_at(priv, i),
+				    &priv->rx_buf_dma[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void k1_emac_free_dma(struct k1_emac_priv *priv)
+{
+	free(priv->rx_buf);
+	free(priv->tx_buf);
+	free(priv->rx_desc);
+	free(priv->tx_desc);
+	priv->rx_buf = NULL;
+	priv->tx_buf = NULL;
+	priv->rx_desc = NULL;
+	priv->tx_desc = NULL;
+}
+
+static int k1_emac_probe(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev_get_plat(dev);
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+	struct ofnode_phandle_args args;
+	int ret;
+
+	BUILD_BUG_ON(sizeof(struct k1_emac_desc) != K1_DESC_SIZE);
+	BUILD_BUG_ON(ARCH_DMA_MINALIGN % K1_DESC_SIZE);
+	BUILD_BUG_ON(K1_TX_DESC_COUNT % K1_DESCS_PER_CACHELINE);
+	BUILD_BUG_ON(K1_RX_DESC_COUNT % K1_DESCS_PER_CACHELINE);
+	BUILD_BUG_ON(FIELD_MAX(K1_RX_DESC_BUFFER_SIZE) < K1_DMA_BUF_SIZE);
+	BUILD_BUG_ON(FIELD_MAX(K1_TX_DESC_BUFFER_SIZE) < K1_DMA_BUF_SIZE);
+
+	priv->base = (void __iomem *)pdata->iobase;
+	priv->interface = pdata->phy_interface;
+	priv->max_speed = pdata->max_speed;
+
+	ret = dev_read_phandle_with_args(dev, "spacemit,apmu", NULL, 1, 0,
+					 &args);
+	if (ret) {
+		dev_err(dev, "failed to get APMU syscon: %d\n", ret);
+		return ret;
+	}
+	ret = regmap_init_mem(args.node, &priv->apmu);
+	if (ret) {
+		dev_err(dev, "failed to map APMU registers: %d\n", ret);
+		return ret;
+	}
+	priv->apmu_offset = args.args[0];
+
+	ret = clk_get_by_index(dev, 0, &priv->clk);
+	if (ret) {
+		dev_err(dev, "failed to get clock: %d\n", ret);
+		goto err_apmu;
+	}
+	ret = clk_enable(&priv->clk);
+	if (ret)
+		goto err_clk_release;
+	priv->clk_enabled = true;
+
+	ret = reset_get_by_index(dev, 0, &priv->reset);
+	if (ret)
+		goto err_clk;
+	ret = reset_deassert(&priv->reset);
+	if (ret)
+		goto err_reset_release;
+	priv->reset_deasserted = true;
+
+	ret = k1_emac_config_interface(priv);
+	if (ret)
+		goto err_reset;
+
+	ret = k1_emac_alloc_dma(dev);
+	if (ret)
+		goto err_dma;
+
+	priv->phy = dm_eth_phy_connect(dev);
+	if (!priv->phy) {
+		ret = -ENODEV;
+		goto err_dma;
+	}
+	priv->phy->supported &= PHY_GBIT_FEATURES;
+	if (priv->interface == PHY_INTERFACE_MODE_RMII)
+		priv->phy->supported &= ~PHY_1000BT_FEATURES;
+	if (priv->max_speed) {
+		ret = phy_set_supported(priv->phy, priv->max_speed);
+		if (ret)
+			goto err_dma;
+	}
+	priv->phy->advertising = priv->phy->supported;
+	ret = phy_config(priv->phy);
+	if (ret)
+		goto err_dma;
+
+	return 0;
+
+err_dma:
+	k1_emac_free_dma(priv);
+err_reset:
+	if (priv->reset_deasserted) {
+		reset_assert(&priv->reset);
+		priv->reset_deasserted = false;
+	}
+err_reset_release:
+	reset_free(&priv->reset);
+err_clk:
+	if (priv->clk_enabled) {
+		clk_disable(&priv->clk);
+		priv->clk_enabled = false;
+	}
+err_clk_release:
+	clk_release_all(&priv->clk, 1);
+err_apmu:
+	regmap_uninit(priv->apmu);
+	dev_err(dev, "probe failed: %d\n", ret);
+	return ret;
+}
+
+static int k1_emac_remove(struct udevice *dev)
+{
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+
+	writel(0, priv->base + K1_DMA_CONTROL);
+	writel(0, priv->base + K1_MAC_RX_CONTROL);
+	writel(0, priv->base + K1_MAC_TX_CONTROL);
+	k1_emac_free_dma(priv);
+	if (priv->reset_deasserted)
+		reset_assert(&priv->reset);
+	reset_free(&priv->reset);
+	if (priv->clk_enabled)
+		clk_disable(&priv->clk);
+	clk_release_all(&priv->clk, 1);
+	regmap_uninit(priv->apmu);
+
+	return 0;
+}
+
+static int k1_emac_of_to_plat(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev_get_plat(dev);
+	struct k1_emac_priv *priv = dev_get_priv(dev);
+	ofnode node;
+	bool mdio_bound = false;
+	int ret;
+
+	pdata->iobase = dev_read_addr(dev);
+	if (pdata->iobase == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	pdata->phy_interface = dev_read_phy_mode(dev);
+	switch (pdata->phy_interface) {
+	case PHY_INTERFACE_MODE_RMII:
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		break;
+	default:
+		return -EINVAL;
+	}
+	pdata->max_speed = dev_read_u32_default(dev, "max-speed", 0);
+
+	ret = k1_emac_read_delay(dev, "tx-internal-delay-ps",
+				 &priv->tx_delay_code);
+	if (ret)
+		return ret;
+	ret = k1_emac_read_delay(dev, "rx-internal-delay-ps",
+				 &priv->rx_delay_code);
+	if (ret)
+		return ret;
+
+	ofnode_for_each_subnode(node, dev_ofnode(dev)) {
+		if (!ofnode_name_eq(node, "mdio") &&
+		    !ofnode_name_eq(node, "mdio-bus"))
+			continue;
+
+		snprintf(priv->mdio_name, sizeof(priv->mdio_name), "%s.mdio",
+			 dev->name);
+		ret = device_bind_driver_to_node(dev, "spacemit_k1_emac_mdio",
+						 priv->mdio_name, node, NULL);
+		if (ret)
+			return ret;
+		mdio_bound = true;
+		break;
+	}
+
+	if (!mdio_bound) {
+		dev_err(dev, "MDIO child node is missing\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct eth_ops k1_emac_ops = {
+	.start = k1_emac_start,
+	.send = k1_emac_send,
+	.recv = k1_emac_recv,
+	.free_pkt = k1_emac_free_pkt,
+	.stop = k1_emac_stop,
+	.write_hwaddr = k1_emac_write_hwaddr,
+};
+
+static const struct udevice_id k1_emac_ids[] = {
+	{ .compatible = "spacemit,k1-emac" },
+	{ }
+};
+
+U_BOOT_DRIVER(k1_emac) = {
+	.name = "spacemit_k1_emac",
+	.id = UCLASS_ETH,
+	.of_match = k1_emac_ids,
+	.of_to_plat = k1_emac_of_to_plat,
+	.probe = k1_emac_probe,
+	.remove = k1_emac_remove,
+	.ops = &k1_emac_ops,
+	.priv_auto = sizeof(struct k1_emac_priv),
+	.plat_auto = sizeof(struct eth_pdata),
+};

-- 
2.56.0

[PATCH 2/3] configs: k1: enable Ethernet support

[Zixian Zeng]

Enable the K1 Ethernet MAC, Realtek PHY driver, and network commands.

Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
---
 configs/spacemit_k1_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/configs/spacemit_k1_defconfig b/configs/spacemit_k1_defconfig
index 9c15d96eae2..cb04eb694b5 100644
--- a/configs/spacemit_k1_defconfig
+++ b/configs/spacemit_k1_defconfig
@@ -44,6 +44,7 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER=y
 CONFIG_HUSH_PARSER=y
+CONFIG_ID_EEPROM=y
 CONFIG_CMD_TLV_EEPROM=y
 CONFIG_SPL_CMD_TLV_EEPROM=y
 CONFIG_OF_UPSTREAM=y
@@ -115,6 +116,11 @@ CONFIG_PHY=y
 CONFIG_PHY_SPACEMIT_K1_PCIE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_EXT4=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_SPACEMIT_K1_EMAC=y
+CONFIG_PHY_REALTEK=y
 CONFIG_SPL_SPI=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_SPL_DM_SPI_FLASH=y

-- 
2.56.0

[PATCH 3/3] MAINTAINERS: spacemit: add K1 Ethernet driver

[Zixian Zeng]

Add the SpacemiT K1 Ethernet driver to the maintained files.

Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
---
 board/spacemit/k1/MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/board/spacemit/k1/MAINTAINERS b/board/spacemit/k1/MAINTAINERS
index c1d6b8f3a1c..a9af13ab0a9 100644
--- a/board/spacemit/k1/MAINTAINERS
+++ b/board/spacemit/k1/MAINTAINERS
@@ -10,6 +10,7 @@ F:	doc/board/spacemit/
 F:	drivers/gpio/spacemit_gpio.c
 F:	drivers/i2c/k1_i2c.c
 F:	drivers/mmc/spacemit_sdhci.c
+F:	drivers/net/spacemit/
 F:	drivers/pci/pcie_dw_spacemit.c
 F:	drivers/pinctrl/spacemit/
 F:	drivers/power/pmic/pmic_spacemit_p1.c

-- 
2.56.0