[PATCH 0/2] usb-host: validate and release configuration descriptors

[PATCH 0/2] usb-host: validate and release configuration descriptors

[Junjie Cao]

The libusb host backend reads interface numbers from the active
configuration descriptor while opening a device. An out-of-range number
can index past USBDevice.altsetting. The backend also leaves an allocated
descriptor behind on endpoint parse and interface claim failures.

Junjie Cao (2):
  usb-host: validate interface number before indexing altsetting
  usb-host: free configuration descriptors on error paths

 hw/usb/host-libusb.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

-- 
2.43.0

[PATCH 1/2] usb-host: validate interface number before indexing altsetting

[Junjie Cao]

From: Junjie Cao <junjie.cao@intel.com>

usb_host_ep_update() indexes USBDevice.altsetting with the interface
number supplied by the active configuration descriptor. A descriptor
with bInterfaceNumber >= USB_MAX_INTERFACES reads past that array while
the host device is opened. Skip such interfaces before the lookup.

Record the descriptor's interface number on its endpoints as well. The
loop index identifies the descriptor's position in the configuration,
which need not equal bInterfaceNumber.

Fixes: 0dbe4768b95 ("usb-host: use correct altsetting in usb_host_ep_update")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3975
Cc: qemu-stable@nongnu.org
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
---
 hw/usb/host-libusb.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/hw/usb/host-libusb.c b/hw/usb/host-libusb.c
index 629505c6d3..fd4a16ee8a 100644
--- a/hw/usb/host-libusb.c
+++ b/hw/usb/host-libusb.c
@@ -895,6 +895,11 @@ static void usb_host_ep_update(USBHostDevice *s)
          * then correct the alternate setting value if necessary.
          */
         intf = &conf->interface[i].altsetting[0];
+        if (intf->bInterfaceNumber >= USB_MAX_INTERFACES) {
+            trace_usb_host_parse_error(s->bus_num, s->addr,
+                                       "invalid interface number");
+            continue;
+        }
         alt = udev->altsetting[intf->bInterfaceNumber];
 
         if (alt != 0) {
@@ -930,7 +935,7 @@ static void usb_host_ep_update(USBHostDevice *s)
             usb_ep_set_max_packet_size(udev, pid, ep,
                                        endp->wMaxPacketSize);
             usb_ep_set_type(udev, pid, ep, type);
-            usb_ep_set_ifnum(udev, pid, ep, i);
+            usb_ep_set_ifnum(udev, pid, ep, intf->bInterfaceNumber);
             usb_ep_set_halted(udev, pid, ep, 0);
 #ifdef HAVE_STREAMS
             if (type == LIBUSB_TRANSFER_TYPE_BULK &&
-- 
2.43.0

[PATCH 2/2] usb-host: free configuration descriptors on error paths

[Junjie Cao]

From: Junjie Cao <junjie.cao@intel.com>

usb_host_ep_update() returns before freeing the active configuration
descriptor when an endpoint address is invalid or duplicated.
usb_host_claim_interfaces() also returns without freeing it when fewer
interfaces can be claimed than the descriptor declares. Each failure
leaves one descriptor allocated.

Fixes: 2b2325ff64 ("use libusb for usb-host")
Cc: qemu-stable@nongnu.org
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
---
 hw/usb/host-libusb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/hw/usb/host-libusb.c b/hw/usb/host-libusb.c
index fd4a16ee8a..491302feb7 100644
--- a/hw/usb/host-libusb.c
+++ b/hw/usb/host-libusb.c
@@ -921,12 +921,12 @@ static void usb_host_ep_update(USBHostDevice *s)
             if (ep == 0) {
                 trace_usb_host_parse_error(s->bus_num, s->addr,
                                            "invalid endpoint address");
-                return;
+                goto out;
             }
             if (usb_ep_get_type(udev, pid, ep) != USB_ENDPOINT_XFER_INVALID) {
                 trace_usb_host_parse_error(s->bus_num, s->addr,
                                            "duplicate endpoint address");
-                return;
+                goto out;
             }
 
             trace_usb_host_parse_endpoint(s->bus_num, s->addr, ep,
@@ -949,6 +949,7 @@ static void usb_host_ep_update(USBHostDevice *s)
         }
     }
 
+out:
     libusb_free_config_descriptor(conf);
 }
 
@@ -1375,6 +1376,7 @@ static int usb_host_claim_interfaces(USBHostDevice *s, int configuration)
         }
     }
     if (claimed != conf->bNumInterfaces) {
+        libusb_free_config_descriptor(conf);
         return USB_RET_STALL;
     }
 
-- 
2.43.0

Re: [PATCH 2/2] usb-host: free configuration descriptors on error paths

[Marc-André Lureau]

Hi

On Sun, Oct 4, 2026 at 4:11 PM Junjie Cao <junjie.cao@linux.dev> wrote:
>
> From: Junjie Cao <junjie.cao@intel.com>
>
> usb_host_ep_update() returns before freeing the active configuration
> descriptor when an endpoint address is invalid or duplicated.
> usb_host_claim_interfaces() also returns without freeing it when fewer
> interfaces can be claimed than the descriptor declares. Each failure
> leaves one descriptor allocated.
>
> Fixes: 2b2325ff64 ("use libusb for usb-host")
> Cc: qemu-stable@nongnu.org
> Signed-off-by: Junjie Cao <junjie.cao@intel.com>

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

Although it's an opportunity to introduce g_auto support:
typedef struct libusb_config_descriptor libusb_config_descriptor;
G_DEFINE_AUTOPTR_CLEANUP_FUNC(libusb_config_descriptor,
                              libusb_free_config_descriptor)

Then declaration should become:
g_autoptr(libusb_config_descriptor) conf = NULL;

And we can drop free paths. Up to you if you want to make a v2


> ---
>  hw/usb/host-libusb.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/hw/usb/host-libusb.c b/hw/usb/host-libusb.c
> index fd4a16ee8a..491302feb7 100644
> --- a/hw/usb/host-libusb.c
> +++ b/hw/usb/host-libusb.c
> @@ -921,12 +921,12 @@ static void usb_host_ep_update(USBHostDevice *s)
>              if (ep == 0) {
>                  trace_usb_host_parse_error(s->bus_num, s->addr,
>                                             "invalid endpoint address");
> -                return;
> +                goto out;
>              }
>              if (usb_ep_get_type(udev, pid, ep) != USB_ENDPOINT_XFER_INVALID) {
>                  trace_usb_host_parse_error(s->bus_num, s->addr,
>                                             "duplicate endpoint address");
> -                return;
> +                goto out;
>              }
>
>              trace_usb_host_parse_endpoint(s->bus_num, s->addr, ep,
> @@ -949,6 +949,7 @@ static void usb_host_ep_update(USBHostDevice *s)
>          }
>      }
>
> +out:
>      libusb_free_config_descriptor(conf);
>  }
>
> @@ -1375,6 +1376,7 @@ static int usb_host_claim_interfaces(USBHostDevice *s, int configuration)
>          }
>      }
>      if (claimed != conf->bNumInterfaces) {
> +        libusb_free_config_descriptor(conf);
>          return USB_RET_STALL;
>      }
>
> --
> 2.43.0
>
>


-- 
Marc-André Lureau

Re: [PATCH 1/2] usb-host: validate interface number before indexing altsetting

[Marc-André Lureau]

Hi

On Sun, Oct 4, 2026 at 4:11 PM Junjie Cao <junjie.cao@linux.dev> wrote:
>
> From: Junjie Cao <junjie.cao@intel.com>
>
> usb_host_ep_update() indexes USBDevice.altsetting with the interface
> number supplied by the active configuration descriptor. A descriptor
> with bInterfaceNumber >= USB_MAX_INTERFACES reads past that array while
> the host device is opened. Skip such interfaces before the lookup.
>
> Record the descriptor's interface number on its endpoints as well. The
> loop index identifies the descriptor's position in the configuration,
> which need not equal bInterfaceNumber.
>
> Fixes: 0dbe4768b95 ("usb-host: use correct altsetting in usb_host_ep_update")
> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3975
> Cc: qemu-stable@nongnu.org
> Signed-off-by: Junjie Cao <junjie.cao@intel.com>
> ---
>  hw/usb/host-libusb.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/hw/usb/host-libusb.c b/hw/usb/host-libusb.c
> index 629505c6d3..fd4a16ee8a 100644
> --- a/hw/usb/host-libusb.c
> +++ b/hw/usb/host-libusb.c
> @@ -895,6 +895,11 @@ static void usb_host_ep_update(USBHostDevice *s)
>           * then correct the alternate setting value if necessary.
>           */
>          intf = &conf->interface[i].altsetting[0];
> +        if (intf->bInterfaceNumber >= USB_MAX_INTERFACES) {
> +            trace_usb_host_parse_error(s->bus_num, s->addr,
> +                                       "invalid interface number");
> +            continue;
> +        }

unlikely to happen, but better be safe.

>          alt = udev->altsetting[intf->bInterfaceNumber];
>
>          if (alt != 0) {
> @@ -930,7 +935,7 @@ static void usb_host_ep_update(USBHostDevice *s)
>              usb_ep_set_max_packet_size(udev, pid, ep,
>                                         endp->wMaxPacketSize);
>              usb_ep_set_type(udev, pid, ep, type);
> -            usb_ep_set_ifnum(udev, pid, ep, i);
> +            usb_ep_set_ifnum(udev, pid, ep, intf->bInterfaceNumber);

ack, it happens to match generally by accident

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>


>              usb_ep_set_halted(udev, pid, ep, 0);
>  #ifdef HAVE_STREAMS
>              if (type == LIBUSB_TRANSFER_TYPE_BULK &&
> --
> 2.43.0
>
>


-- 
Marc-André Lureau

Re: [PATCH 2/2] usb-host: free configuration descriptors on error paths

[Junjie Cao]

Thanks for the review. Will send v2 with the g_autoptr conversion.