[PATCH v2 05/11] hw/usb/aspeed-udc: Store the EP_DMA_STS write first

[Jamin Lin <jamin_lin@aspeedtech.com>]

The other helpers run after EP_DMA_STS is written. The descriptor mode
kick did not: it had to run before the write, because it stored the
value itself.

Write the register first in every case, then call the helper. The order
is now the same everywhere, so a later change cannot go wrong on it,
and the code is easier to maintain.

No functional change.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/usb/aspeed-udc.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/hw/usb/aspeed-udc.c b/hw/usb/aspeed-udc.c
index b43f077c2d..4572914e16 100644
--- a/hw/usb/aspeed-udc.c
+++ b/hw/usb/aspeed-udc.c
@@ -619,12 +619,13 @@ static AspeedUDCXferResult aspeed_udc_ep_xfer_out_single(AspeedUDCState *s,
  * If the request needs more data than was queued, keep it parked and wait for
  * the next kick.
  */
-static void aspeed_udc_ep_in_kick_desc(AspeedUDCState *s, int ep, uint32_t val)
+static void aspeed_udc_ep_in_kick_desc(AspeedUDCState *s, int ep,
+                                       uint32_t old_val)
 {
     AspeedUDCEP *e = &s->ep[ep];
-    uint32_t cur_rptr = FIELD_EX32(e->regs[R_EP_DMA_STS], EP_DMA_STS, RPTR);
-    uint32_t new_rptr = FIELD_EX32(val, EP_DMA_STS, RPTR);
-    uint32_t new_wptr = FIELD_EX32(val, EP_DMA_STS, WPTR);
+    uint32_t new_rptr = FIELD_EX32(e->regs[R_EP_DMA_STS], EP_DMA_STS, RPTR);
+    uint32_t new_wptr = FIELD_EX32(e->regs[R_EP_DMA_STS], EP_DMA_STS, WPTR);
+    uint32_t cur_rptr = FIELD_EX32(old_val, EP_DMA_STS, RPTR);
     USBPacket *p = e->pkt;
 
     /*
@@ -641,8 +642,9 @@ static void aspeed_udc_ep_in_kick_desc(AspeedUDCState *s, int ep, uint32_t val)
         cur_rptr = new_rptr;
         e->desc_off = 0;
     }
-    /* store the guest's write, but keep our own read pointer */
-    e->regs[R_EP_DMA_STS] = FIELD_DP32(val, EP_DMA_STS, RPTR, cur_rptr);
+    /* keep our own read pointer */
+    e->regs[R_EP_DMA_STS] = FIELD_DP32(e->regs[R_EP_DMA_STS], EP_DMA_STS,
+                                       RPTR, cur_rptr);
 
     /* nothing to do unless an IN packet is waiting and the ring has data */
     if (!p || cur_rptr == new_wptr) {
@@ -715,6 +717,7 @@ static void aspeed_udc_ep_write(void *opaque, hwaddr offset, uint64_t data,
     AspeedUDCEP *e = opaque;
     AspeedUDCState *s = container_of(e - e->index, AspeedUDCState, ep[0]);
     uint32_t reg = offset >> 2;
+    uint32_t old_val = e->regs[reg];
     uint32_t val = data;
 
     trace_aspeed_udc_ep_write(e->index, offset, val);
@@ -725,12 +728,12 @@ static void aspeed_udc_ep_write(void *opaque, hwaddr offset, uint64_t data,
         break;
     case R_EP_DMA_STS:
         val &= 0x77ffffff;
+        e->regs[reg] = val;
         if (FIELD_EX32(e->regs[R_EP_DMA_CTRL], EP_DMA_CTRL, DESC_OP_EN)) {
             /* IN, descriptor-list mode */
-            aspeed_udc_ep_in_kick_desc(s, e->index, val);
+            aspeed_udc_ep_in_kick_desc(s, e->index, old_val);
         } else {
             /* OUT, single-stage mode */
-            e->regs[reg] = val;
             aspeed_udc_ep_out_kick_single(s, e->index);
         }
         break;
-- 
2.43.0