All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Coia Prant" <coiaprant@gmail.com>
Cc: devicetree@vger.kernel.org, vkoul@kernel.org,
	conor+dt@kernel.org, olteanv@gmail.com,
	linux-phy@lists.infradead.org, neil.armstrong@linaro.org,
	robh@kernel.org
Subject: Re: [PATCH v10 1/2] dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property
Date: Mon, 05 Oct 2026 22:19:13 +0000	[thread overview]
Message-ID: <20261005221913.D20A51F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20261005221229.1095843-2-coiaprant@gmail.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] dt-bindings: schema validation fails for non-RK3568 variants due to default injection
--

commit f30c2450528092b975c8899ad617f4fa20dab422
Author: Coia Prant <coiaprant@gmail.com>

dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property

On RK3568, the SGMII interface can be routed to either GMAC0 or
GMAC1 via the pipe_sgmii_mac_sel bit in the pipe GRF registers.
Add the optional "rockchip,sgmii-mac-sel" property to allow the
device tree to select which GMAC controller is used for SGMII.

> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> index 379b08bd9e97a..8e898bce9af73 100644
> --- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> @@ -80,6 +80,15 @@ properties:
>      description:
>        Some additional pipe settings are accessed through GRF regs.
>  
> +  rockchip,sgmii-mac-sel:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +    default: 1
> +    description:
> +      Select gmac0 or gmac1 to be used as SGMII controller.
> +      The hardware reset value is GMAC1 (1). Set this to 0 to route
> +      SGMII to GMAC0.
> +
>    "#phy-cells":
>      const: 1

[ ... ]

> @@ -105,6 +114,10 @@ allOf:
>            maxItems: 1
>          reset-names:
>            maxItems: 1
> +        rockchip,sgmii-mac-sel: true
> +    else:
> +      properties:
> +        rockchip,sgmii-mac-sel: false

[Severity: Medium]
Will this break dtbs_check for non-RK3568 platforms?

When the dtschema tooling processes a device node for a non-RK3568 compatible
(like rockchip,rk3588-naneng-combphy), it injects the top-level default value
of 1 into the node data.

Then the allOf evaluation applies this else branch, which enforces
rockchip,sgmii-mac-sel: false (meaning the property must not exist).

The presence of the injected default value violates this constraint, causing
validation to fail.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261005221229.1095843-1-coiaprant@gmail.com?part=1

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: sashiko-bot@kernel.org
To: "Coia Prant" <coiaprant@gmail.com>
Cc: devicetree@vger.kernel.org, vkoul@kernel.org,
	conor+dt@kernel.org, olteanv@gmail.com,
	linux-phy@lists.infradead.org, neil.armstrong@linaro.org,
	robh@kernel.org
Subject: Re: [PATCH v10 1/2] dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property
Date: Mon, 05 Oct 2026 22:19:13 +0000	[thread overview]
Message-ID: <20261005221913.D20A51F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20261005221229.1095843-2-coiaprant@gmail.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] dt-bindings: schema validation fails for non-RK3568 variants due to default injection
--

commit f30c2450528092b975c8899ad617f4fa20dab422
Author: Coia Prant <coiaprant@gmail.com>

dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property

On RK3568, the SGMII interface can be routed to either GMAC0 or
GMAC1 via the pipe_sgmii_mac_sel bit in the pipe GRF registers.
Add the optional "rockchip,sgmii-mac-sel" property to allow the
device tree to select which GMAC controller is used for SGMII.

> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> index 379b08bd9e97a..8e898bce9af73 100644
> --- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> @@ -80,6 +80,15 @@ properties:
>      description:
>        Some additional pipe settings are accessed through GRF regs.
>  
> +  rockchip,sgmii-mac-sel:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +    default: 1
> +    description:
> +      Select gmac0 or gmac1 to be used as SGMII controller.
> +      The hardware reset value is GMAC1 (1). Set this to 0 to route
> +      SGMII to GMAC0.
> +
>    "#phy-cells":
>      const: 1

[ ... ]

> @@ -105,6 +114,10 @@ allOf:
>            maxItems: 1
>          reset-names:
>            maxItems: 1
> +        rockchip,sgmii-mac-sel: true
> +    else:
> +      properties:
> +        rockchip,sgmii-mac-sel: false

[Severity: Medium]
Will this break dtbs_check for non-RK3568 platforms?

When the dtschema tooling processes a device node for a non-RK3568 compatible
(like rockchip,rk3588-naneng-combphy), it injects the top-level default value
of 1 into the node data.

Then the allOf evaluation applies this else branch, which enforces
rockchip,sgmii-mac-sel: false (meaning the property must not exist).

The presence of the injected default value violates this constraint, causing
validation to fail.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261005221229.1095843-1-coiaprant@gmail.com?part=1

  reply	other threads:[~2026-10-05 22:19 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-05 22:12 [PATCH v10 0/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568 Coia Prant
2026-10-05 22:12 ` Coia Prant
2026-10-05 22:12 ` Coia Prant
2026-10-05 22:12 ` [PATCH v10 1/2] dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property Coia Prant
2026-10-05 22:12   ` Coia Prant
2026-10-05 22:12   ` Coia Prant
2026-10-05 22:19   ` sashiko-bot [this message]
2026-10-05 22:19     ` sashiko-bot
2026-10-05 22:12 ` [PATCH v10 2/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568 Coia Prant
2026-10-05 22:12   ` Coia Prant
2026-10-05 22:12   ` Coia Prant

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261005221913.D20A51F000FF@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=coiaprant@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=neil.armstrong@linaro.org \
    --cc=olteanv@gmail.com \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.