All of lore.kernel.org
 help / color / mirror / Atom feed
From: Coia Prant <coiaprant@gmail.com>
To: Vinod Koul <vkoul@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	Coia Prant <coiaprant@gmail.com>
Subject: [PATCH v11 2/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568
Date: Tue,  6 Oct 2026 06:59:44 +0800	[thread overview]
Message-ID: <20261005225944.1171574-3-coiaprant@gmail.com> (raw)
In-Reply-To: <20261005225944.1171574-1-coiaprant@gmail.com>

On RK3568, the SGMII interface can be routed to either GMAC0 or
GMAC1 via the GRF register pipe_sgmii_mac_sel.

Add support for this selection by introducing
the "rockchip,sgmii-mac-sel" DT property.

From the RK3568 TRM (Part1, Page 229), the PIPE_GRF_XPCS_CON0
bit 1 (pipe_sgmii_mac_sel) is defined as:

    0: SGMII routed to GMAC0
    1: SGMII routed to GMAC1

The hardware reset value is 1 (GMAC1). If the property is set to 0,
the driver routes SGMII to GMAC0; if set to 1 (or omitted), it
remains at GMAC1.

This is necessary for boards such as the Ariaboard Photonicat, which
uses the SGMII interface connected to GMAC0.

Out-of-range values are rejected by dtschema, so the driver does not
duplicate the range check.

Link: https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf (Page 229)
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index 7843356a4dd47..7b867e7520064 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -186,6 +186,7 @@ struct rockchip_combphy_grfcfg {
 	struct combphy_reg pipe_xpcs_phy_ready;
 	struct combphy_reg pipe_pcie1l0_sel;
 	struct combphy_reg pipe_pcie1l1_sel;
+	struct combphy_reg pipe_sgmii_mac_sel;
 	struct combphy_reg u3otg0_port_en;
 	struct combphy_reg u3otg1_port_en;
 };
@@ -212,6 +213,7 @@ struct rockchip_combphy_priv {
 	bool enable_ssc;
 	bool ext_refclk;
 	struct clk *refclk;
+	u32 sgmii_mac_sel;
 };
 
 static void rockchip_combphy_updatel(struct rockchip_combphy_priv *priv,
@@ -375,6 +377,9 @@ static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy
 
 	priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk");
 
+	priv->sgmii_mac_sel = 1;
+	device_property_read_u32(dev, "rockchip,sgmii-mac-sel", &priv->sgmii_mac_sel);
+
 	priv->phy_rst = devm_reset_control_get_exclusive(dev, "phy");
 	/* fallback to old behaviour */
 	if (PTR_ERR(priv->phy_rst) == -ENOENT)
@@ -873,6 +878,8 @@ static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
 		break;
 
 	case PHY_TYPE_SGMII:
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_sgmii_mac_sel,
+					     priv->sgmii_mac_sel > 0);
 		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
@@ -984,6 +991,7 @@ static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
 	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x4407 },
 	/* pipe-grf */
 	.pipe_con0_for_sata	= { 0x0000, 15, 0, 0x00, 0x2220 },
+	.pipe_sgmii_mac_sel	= { 0x0040, 1, 1, 0x00, 0x01 },
 	.pipe_xpcs_phy_ready	= { 0x0040, 2, 2, 0x00, 0x01 },
 	.u3otg0_port_en		= { 0x0104, 15, 0, 0x0181, 0x1100 },
 	.u3otg1_port_en		= { 0x0144, 15, 0, 0x0181, 0x1100 },
-- 
2.47.3


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Coia Prant <coiaprant@gmail.com>
To: Vinod Koul <vkoul@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	Coia Prant <coiaprant@gmail.com>
Subject: [PATCH v11 2/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568
Date: Tue,  6 Oct 2026 06:59:44 +0800	[thread overview]
Message-ID: <20261005225944.1171574-3-coiaprant@gmail.com> (raw)
In-Reply-To: <20261005225944.1171574-1-coiaprant@gmail.com>

On RK3568, the SGMII interface can be routed to either GMAC0 or
GMAC1 via the GRF register pipe_sgmii_mac_sel.

Add support for this selection by introducing
the "rockchip,sgmii-mac-sel" DT property.

From the RK3568 TRM (Part1, Page 229), the PIPE_GRF_XPCS_CON0
bit 1 (pipe_sgmii_mac_sel) is defined as:

    0: SGMII routed to GMAC0
    1: SGMII routed to GMAC1

The hardware reset value is 1 (GMAC1). If the property is set to 0,
the driver routes SGMII to GMAC0; if set to 1 (or omitted), it
remains at GMAC1.

This is necessary for boards such as the Ariaboard Photonicat, which
uses the SGMII interface connected to GMAC0.

Out-of-range values are rejected by dtschema, so the driver does not
duplicate the range check.

Link: https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf (Page 229)
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index 7843356a4dd47..7b867e7520064 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -186,6 +186,7 @@ struct rockchip_combphy_grfcfg {
 	struct combphy_reg pipe_xpcs_phy_ready;
 	struct combphy_reg pipe_pcie1l0_sel;
 	struct combphy_reg pipe_pcie1l1_sel;
+	struct combphy_reg pipe_sgmii_mac_sel;
 	struct combphy_reg u3otg0_port_en;
 	struct combphy_reg u3otg1_port_en;
 };
@@ -212,6 +213,7 @@ struct rockchip_combphy_priv {
 	bool enable_ssc;
 	bool ext_refclk;
 	struct clk *refclk;
+	u32 sgmii_mac_sel;
 };
 
 static void rockchip_combphy_updatel(struct rockchip_combphy_priv *priv,
@@ -375,6 +377,9 @@ static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy
 
 	priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk");
 
+	priv->sgmii_mac_sel = 1;
+	device_property_read_u32(dev, "rockchip,sgmii-mac-sel", &priv->sgmii_mac_sel);
+
 	priv->phy_rst = devm_reset_control_get_exclusive(dev, "phy");
 	/* fallback to old behaviour */
 	if (PTR_ERR(priv->phy_rst) == -ENOENT)
@@ -873,6 +878,8 @@ static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
 		break;
 
 	case PHY_TYPE_SGMII:
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_sgmii_mac_sel,
+					     priv->sgmii_mac_sel > 0);
 		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
@@ -984,6 +991,7 @@ static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
 	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x4407 },
 	/* pipe-grf */
 	.pipe_con0_for_sata	= { 0x0000, 15, 0, 0x00, 0x2220 },
+	.pipe_sgmii_mac_sel	= { 0x0040, 1, 1, 0x00, 0x01 },
 	.pipe_xpcs_phy_ready	= { 0x0040, 2, 2, 0x00, 0x01 },
 	.u3otg0_port_en		= { 0x0104, 15, 0, 0x0181, 0x1100 },
 	.u3otg1_port_en		= { 0x0144, 15, 0, 0x0181, 0x1100 },
-- 
2.47.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Coia Prant <coiaprant@gmail.com>
To: Vinod Koul <vkoul@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	Coia Prant <coiaprant@gmail.com>
Subject: [PATCH v11 2/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568
Date: Tue,  6 Oct 2026 06:59:44 +0800	[thread overview]
Message-ID: <20261005225944.1171574-3-coiaprant@gmail.com> (raw)
In-Reply-To: <20261005225944.1171574-1-coiaprant@gmail.com>

On RK3568, the SGMII interface can be routed to either GMAC0 or
GMAC1 via the GRF register pipe_sgmii_mac_sel.

Add support for this selection by introducing
the "rockchip,sgmii-mac-sel" DT property.

From the RK3568 TRM (Part1, Page 229), the PIPE_GRF_XPCS_CON0
bit 1 (pipe_sgmii_mac_sel) is defined as:

    0: SGMII routed to GMAC0
    1: SGMII routed to GMAC1

The hardware reset value is 1 (GMAC1). If the property is set to 0,
the driver routes SGMII to GMAC0; if set to 1 (or omitted), it
remains at GMAC1.

This is necessary for boards such as the Ariaboard Photonicat, which
uses the SGMII interface connected to GMAC0.

Out-of-range values are rejected by dtschema, so the driver does not
duplicate the range check.

Link: https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf (Page 229)
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index 7843356a4dd47..7b867e7520064 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -186,6 +186,7 @@ struct rockchip_combphy_grfcfg {
 	struct combphy_reg pipe_xpcs_phy_ready;
 	struct combphy_reg pipe_pcie1l0_sel;
 	struct combphy_reg pipe_pcie1l1_sel;
+	struct combphy_reg pipe_sgmii_mac_sel;
 	struct combphy_reg u3otg0_port_en;
 	struct combphy_reg u3otg1_port_en;
 };
@@ -212,6 +213,7 @@ struct rockchip_combphy_priv {
 	bool enable_ssc;
 	bool ext_refclk;
 	struct clk *refclk;
+	u32 sgmii_mac_sel;
 };
 
 static void rockchip_combphy_updatel(struct rockchip_combphy_priv *priv,
@@ -375,6 +377,9 @@ static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy
 
 	priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk");
 
+	priv->sgmii_mac_sel = 1;
+	device_property_read_u32(dev, "rockchip,sgmii-mac-sel", &priv->sgmii_mac_sel);
+
 	priv->phy_rst = devm_reset_control_get_exclusive(dev, "phy");
 	/* fallback to old behaviour */
 	if (PTR_ERR(priv->phy_rst) == -ENOENT)
@@ -873,6 +878,8 @@ static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
 		break;
 
 	case PHY_TYPE_SGMII:
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_sgmii_mac_sel,
+					     priv->sgmii_mac_sel > 0);
 		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
@@ -984,6 +991,7 @@ static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
 	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x4407 },
 	/* pipe-grf */
 	.pipe_con0_for_sata	= { 0x0000, 15, 0, 0x00, 0x2220 },
+	.pipe_sgmii_mac_sel	= { 0x0040, 1, 1, 0x00, 0x01 },
 	.pipe_xpcs_phy_ready	= { 0x0040, 2, 2, 0x00, 0x01 },
 	.u3otg0_port_en		= { 0x0104, 15, 0, 0x0181, 0x1100 },
 	.u3otg1_port_en		= { 0x0144, 15, 0, 0x0181, 0x1100 },
-- 
2.47.3


  parent reply	other threads:[~2026-10-05 23:00 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-05 22:59 [PATCH v11 0/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568 Coia Prant
2026-10-05 22:59 ` Coia Prant
2026-10-05 22:59 ` Coia Prant
2026-10-05 22:59 ` [PATCH v11 1/2] dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property Coia Prant
2026-10-05 22:59   ` Coia Prant
2026-10-05 22:59   ` Coia Prant
2026-10-05 22:59 ` Coia Prant [this message]
2026-10-05 22:59   ` [PATCH v11 2/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568 Coia Prant
2026-10-05 22:59   ` Coia Prant
2026-10-06  3:27 ` [PATCH v11 0/2] " Rob Herring
2026-10-06  3:27   ` Rob Herring
2026-10-06  3:27   ` Rob Herring
2026-10-06  7:48   ` Coia Prant
2026-10-06  7:48     ` Coia Prant
2026-10-06  7:48     ` Coia Prant

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261005225944.1171574-3-coiaprant@gmail.com \
    --to=coiaprant@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mani@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.