Re: [PATCH v2 3/7] leds: aw2013: Add AW2027 support

[sashiko-bot@kernel.org]

> The AW2027 is basically the same as the AW2013.
> 
> It differs in:
> - the max current (30mA rather than 15)
> - the number of current levels for colour-mixing (16 rather than 4)
> - the supply voltage max
> - the charge indicator (unsupported by our driver at this time)
> 
> The max current register (imax) also moves from LCFG to GCR2, and the
> selectable current levels for colour-mixing (LCFG_CUR) take their place.
> 
> The current driver implementation provided here sets the global imax to
> it's maximum, and scales each led to the closest value using the local
> imax. It's the best result achievable short of adding custom sysfs
> entries and mucking up the linux interfaces.
> 
> Comparison of all AW20XX chips https://www.awinic.com/en/productCompareList?id=47&ids=1022,74,96,75,72,71,928,927,73,76,578
> AW2027 datasheet: https://doc.awinic.com/doc/202507/77b87097-27bf-48cd-af9b-9b615064c1e1.pdf
> Vendor driver: https://www.awinic.com/en/driver/AW2027DNR/454
> 
> Signed-off-by: Paul Sajna <sajattack@postmarketos.org>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261005-aw2013-aw20xx-rename-v2-0-108ecbdf2775@postmarketos.org?part=3