[PATCH] accel/ivpu: Limit DMA address width to 42 bits on 40XX and later

[Karol Wachowski <karol.wachowski@linux.intel.com>]

On 40XX and later the NPU does not treat address bits 42 and above as
part of the memory address, as the hardware uses them internally, but
ivpu sets a 48-bit DMA mask for these generations.

In practice the IOMMU capabilities already limit the DMA addresses to
42 bits, so this does not fix an observed problem. Set the DMA mask to
42 bits anyway, so the driver does not depend on the IOMMU
configuration to stay within the range the NPU can address. 37XX keeps
its 38-bit mask.

Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
---
 drivers/accel/ivpu/ivpu_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/accel/ivpu/ivpu_drv.c b/drivers/accel/ivpu/ivpu_drv.c
index ab1a9448c2cc..6b71edf566e7 100644
--- a/drivers/accel/ivpu/ivpu_drv.c
+++ b/drivers/accel/ivpu/ivpu_drv.c
@@ -709,7 +709,7 @@ static int ivpu_pci_init(struct ivpu_device *vdev)
 	}
 
 	if (ivpu_hw_ip_gen(vdev) >= IVPU_HW_IP_40XX)
-		dma_bits = 48;
+		dma_bits = 42;
 	else
 		dma_bits = 38;
 
-- 
2.43.0