[PATCH net-next v3 0/2] net: pcs: rzn1-miic: Validate dtb configuration values

[PATCH net-next v3 0/2] net: pcs: rzn1-miic: Validate dtb configuration values

[Kyle Hendry via B4 Relay]

This series addresses issues found when reviewing another fix:
https://lore.kernel.org/netdev/20260915-rzn1-miic-fix-array-v5-1-b7173fd5b97d@reliablecontrols.com/

Invalid values from the dtb could cause out of bounds array access. Checking
the values as they're parsed should prevent this.

Changes in v3:
- Squash patches changing miic_port_max
- Change name of miic_port_max to miic_port_last
- Remove fixes tags
- Add another check for configuration value of miic-switch-portin
- Link to v2: https://lore.kernel.org/r/20260928-miic-validate-dtb-v2-0-1ee3d33748e9@reliablecontrols.com/

Changes in v2:
- Simplify fixes by making miic_port_max the last documented port number
- Add fixes tags
- Link to v1: https://lore.kernel.org/r/20260925-miic-validate-dtb-v1-0-3a6db9bb75ec@reliablecontrols.com

Signed-off-by: Kyle Hendry <khendry@reliablecontrols.com>
---
Kyle Hendry (2):
      net: pcs: rzn1-miic: Update port numbering for RZ/T2H
      net: pcs: rzn1-miic: Validate dtb configuration values

 drivers/net/pcs/pcs-rzn1-miic.c | 45 +++++++++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 8 deletions(-)
---
base-commit: a5e7d8e446af9803e37a3b6a4d416fb41178348f
change-id: 20261005-miic-validate-dtb-v3-cf31820cb1e9

Best regards,
-- 
Kyle Hendry <khendry@reliablecontrols.com>

[PATCH net-next v3 0/2] net: pcs: rzn1-miic: Validate dtb configuration values

[Kyle Hendry]

This series addresses issues found when reviewing another fix:
https://lore.kernel.org/netdev/20260915-rzn1-miic-fix-array-v5-1-b7173fd5b97d@reliablecontrols.com/

Invalid values from the dtb could cause out of bounds array access. Checking
the values as they're parsed should prevent this.

Changes in v3:
- Squash patches changing miic_port_max
- Change name of miic_port_max to miic_port_last
- Remove fixes tags
- Add another check for configuration value of miic-switch-portin
- Link to v2: https://lore.kernel.org/r/20260928-miic-validate-dtb-v2-0-1ee3d33748e9@reliablecontrols.com/

Changes in v2:
- Simplify fixes by making miic_port_max the last documented port number
- Add fixes tags
- Link to v1: https://lore.kernel.org/r/20260925-miic-validate-dtb-v1-0-3a6db9bb75ec@reliablecontrols.com

Signed-off-by: Kyle Hendry <khendry@reliablecontrols.com>
---
Kyle Hendry (2):
      net: pcs: rzn1-miic: Update port numbering for RZ/T2H
      net: pcs: rzn1-miic: Validate dtb configuration values

 drivers/net/pcs/pcs-rzn1-miic.c | 45 +++++++++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 8 deletions(-)
---
base-commit: a5e7d8e446af9803e37a3b6a4d416fb41178348f
change-id: 20261005-miic-validate-dtb-v3-cf31820cb1e9

Best regards,
-- 
Kyle Hendry <khendry@reliablecontrols.com>

[PATCH net-next v3 1/2] net: pcs: rzn1-miic: Update port numbering for RZ/T2H

[Kyle Hendry via B4 Relay]

From: Kyle Hendry <khendry@reliablecontrols.com>

The port numbers on the RZ/T2H are documented as 0 to 3. Update the info
structure and change the member name to miic_port_last to be more accurate.

This value was being used as the number of miic registers when setting
default values. Add logic to get the total port count and loop over that.

Signed-off-by: Kyle Hendry <khendry@reliablecontrols.com>
---
 drivers/net/pcs/pcs-rzn1-miic.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/net/pcs/pcs-rzn1-miic.c b/drivers/net/pcs/pcs-rzn1-miic.c
index 3aa513467060..31716241b58f 100644
--- a/drivers/net/pcs/pcs-rzn1-miic.c
+++ b/drivers/net/pcs/pcs-rzn1-miic.c
@@ -222,7 +222,7 @@ enum miic_type {
  * @index_to_string: String representations of the index values
  * @index_to_string_count: Number of entries in the index_to_string array
  * @miic_port_start: MIIC port start number
- * @miic_port_max: Maximum MIIC supported
+ * @miic_port_last: MIIC port last number
  * @sw_mode_mask: Switch mode mask
  * @reset_ids: Reset names array
  * @reset_count: Number of entries in the reset_ids array
@@ -240,7 +240,7 @@ struct miic_of_data {
 	const char * const *index_to_string;
 	u8 index_to_string_count;
 	u8 miic_port_start;
-	u8 miic_port_max;
+	u8 miic_port_last;
 	u8 sw_mode_mask;
 	const char * const *reset_ids;
 	u8 reset_count;
@@ -485,7 +485,7 @@ struct phylink_pcs *miic_create(struct device *dev, struct device_node *np)
 
 	miic = platform_get_drvdata(pdev);
 	of_data = miic->of_data;
-	if (port > of_data->miic_port_max || port < of_data->miic_port_start) {
+	if (port > of_data->miic_port_last || port < of_data->miic_port_start) {
 		put_device(&pdev->dev);
 		return ERR_PTR(-EINVAL);
 	}
@@ -523,6 +523,7 @@ EXPORT_SYMBOL(miic_destroy);
 static int miic_init_hw(struct miic *miic, u32 cfg_mode)
 {
 	u8 sw_mode_mask = miic->of_data->sw_mode_mask;
+	int num_ports;
 	int port;
 
 	/* Unlock write access to accessory registers (cf datasheet). If this
@@ -538,7 +539,10 @@ static int miic_init_hw(struct miic *miic, u32 cfg_mode)
 	miic_reg_writel(miic, MIIC_MODCTRL,
 			((cfg_mode << __ffs(sw_mode_mask)) & sw_mode_mask));
 
-	for (port = 0; port < miic->of_data->miic_port_max; port++) {
+	num_ports = miic->of_data->miic_port_last -
+		miic->of_data->miic_port_start + 1;
+
+	for (port = 0; port < num_ports; port++) {
 		miic_converter_enable(miic, port, 0);
 		/* Disable speed/duplex control from these registers, datasheet
 		 * says switch registers should be used to setup switch port
@@ -825,7 +829,7 @@ static struct miic_of_data rzn1_miic_of_data = {
 	.index_to_string = index_to_string,
 	.index_to_string_count = ARRAY_SIZE(index_to_string),
 	.miic_port_start = 1,
-	.miic_port_max = 5,
+	.miic_port_last = 5,
 	.sw_mode_mask = GENMASK(4, 0),
 	.init_unlock_lock_regs = true,
 	.miic_write = miic_reg_writel_unlocked,
@@ -841,7 +845,7 @@ static struct miic_of_data rzt2h_miic_of_data = {
 	.index_to_string = rzt2h_index_to_string,
 	.index_to_string_count = ARRAY_SIZE(rzt2h_index_to_string),
 	.miic_port_start = 0,
-	.miic_port_max = 4,
+	.miic_port_last = 3,
 	.sw_mode_mask = GENMASK(2, 0),
 	.reset_ids = rzt2h_reset_ids,
 	.reset_count = ARRAY_SIZE(rzt2h_reset_ids),

-- 
2.43.0

[PATCH net-next v3 1/2] net: pcs: rzn1-miic: Update port numbering for RZ/T2H

[Kyle Hendry]

The port numbers on the RZ/T2H are documented as 0 to 3. Update the info
structure and change the member name to miic_port_last to be more accurate.

This value was being used as the number of miic registers when setting
default values. Add logic to get the total port count and loop over that.

Signed-off-by: Kyle Hendry <khendry@reliablecontrols.com>
---
 drivers/net/pcs/pcs-rzn1-miic.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/net/pcs/pcs-rzn1-miic.c b/drivers/net/pcs/pcs-rzn1-miic.c
index 3aa513467060..31716241b58f 100644
--- a/drivers/net/pcs/pcs-rzn1-miic.c
+++ b/drivers/net/pcs/pcs-rzn1-miic.c
@@ -222,7 +222,7 @@ enum miic_type {
  * @index_to_string: String representations of the index values
  * @index_to_string_count: Number of entries in the index_to_string array
  * @miic_port_start: MIIC port start number
- * @miic_port_max: Maximum MIIC supported
+ * @miic_port_last: MIIC port last number
  * @sw_mode_mask: Switch mode mask
  * @reset_ids: Reset names array
  * @reset_count: Number of entries in the reset_ids array
@@ -240,7 +240,7 @@ struct miic_of_data {
 	const char * const *index_to_string;
 	u8 index_to_string_count;
 	u8 miic_port_start;
-	u8 miic_port_max;
+	u8 miic_port_last;
 	u8 sw_mode_mask;
 	const char * const *reset_ids;
 	u8 reset_count;
@@ -485,7 +485,7 @@ struct phylink_pcs *miic_create(struct device *dev, struct device_node *np)
 
 	miic = platform_get_drvdata(pdev);
 	of_data = miic->of_data;
-	if (port > of_data->miic_port_max || port < of_data->miic_port_start) {
+	if (port > of_data->miic_port_last || port < of_data->miic_port_start) {
 		put_device(&pdev->dev);
 		return ERR_PTR(-EINVAL);
 	}
@@ -523,6 +523,7 @@ EXPORT_SYMBOL(miic_destroy);
 static int miic_init_hw(struct miic *miic, u32 cfg_mode)
 {
 	u8 sw_mode_mask = miic->of_data->sw_mode_mask;
+	int num_ports;
 	int port;
 
 	/* Unlock write access to accessory registers (cf datasheet). If this
@@ -538,7 +539,10 @@ static int miic_init_hw(struct miic *miic, u32 cfg_mode)
 	miic_reg_writel(miic, MIIC_MODCTRL,
 			((cfg_mode << __ffs(sw_mode_mask)) & sw_mode_mask));
 
-	for (port = 0; port < miic->of_data->miic_port_max; port++) {
+	num_ports = miic->of_data->miic_port_last -
+		miic->of_data->miic_port_start + 1;
+
+	for (port = 0; port < num_ports; port++) {
 		miic_converter_enable(miic, port, 0);
 		/* Disable speed/duplex control from these registers, datasheet
 		 * says switch registers should be used to setup switch port
@@ -825,7 +829,7 @@ static struct miic_of_data rzn1_miic_of_data = {
 	.index_to_string = index_to_string,
 	.index_to_string_count = ARRAY_SIZE(index_to_string),
 	.miic_port_start = 1,
-	.miic_port_max = 5,
+	.miic_port_last = 5,
 	.sw_mode_mask = GENMASK(4, 0),
 	.init_unlock_lock_regs = true,
 	.miic_write = miic_reg_writel_unlocked,
@@ -841,7 +845,7 @@ static struct miic_of_data rzt2h_miic_of_data = {
 	.index_to_string = rzt2h_index_to_string,
 	.index_to_string_count = ARRAY_SIZE(rzt2h_index_to_string),
 	.miic_port_start = 0,
-	.miic_port_max = 4,
+	.miic_port_last = 3,
 	.sw_mode_mask = GENMASK(2, 0),
 	.reset_ids = rzt2h_reset_ids,
 	.reset_count = ARRAY_SIZE(rzt2h_reset_ids),

-- 
2.43.0

Re: [PATCH net-next v3 1/2] net: pcs: rzn1-miic: Update port numbering for RZ/T2H

[Simon Horman]

On Tue, Oct 06, 2026 at 09:48:11AM -0700, Kyle Hendry via B4 Relay wrote:
> From: Kyle Hendry <khendry@reliablecontrols.com>
> 
> The port numbers on the RZ/T2H are documented as 0 to 3. Update the info
> structure and change the member name to miic_port_last to be more accurate.
> 
> This value was being used as the number of miic registers when setting
> default values. Add logic to get the total port count and loop over that.
> 
> Signed-off-by: Kyle Hendry <khendry@reliablecontrols.com>

Reviewed-by: Simon Horman <horms@kernel.org>

Re: [PATCH net-next v3 1/2] net: pcs: rzn1-miic: Update port numbering for RZ/T2H

[Lad, Prabhakar]

On Tue, Oct 6, 2026 at 5:48 PM Kyle Hendry via B4 Relay
<devnull+khendry.reliablecontrols.com@kernel.org> wrote:
>
> From: Kyle Hendry <khendry@reliablecontrols.com>
>
> The port numbers on the RZ/T2H are documented as 0 to 3. Update the info
> structure and change the member name to miic_port_last to be more accurate.
>
> This value was being used as the number of miic registers when setting
> default values. Add logic to get the total port count and loop over that.
>
> Signed-off-by: Kyle Hendry <khendry@reliablecontrols.com>
> ---
>  drivers/net/pcs/pcs-rzn1-miic.c | 16 ++++++++++------
>  1 file changed, 10 insertions(+), 6 deletions(-)
>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Cheers,
Prabhakar

> diff --git a/drivers/net/pcs/pcs-rzn1-miic.c b/drivers/net/pcs/pcs-rzn1-miic.c
> index 3aa513467060..31716241b58f 100644
> --- a/drivers/net/pcs/pcs-rzn1-miic.c
> +++ b/drivers/net/pcs/pcs-rzn1-miic.c
> @@ -222,7 +222,7 @@ enum miic_type {
>   * @index_to_string: String representations of the index values
>   * @index_to_string_count: Number of entries in the index_to_string array
>   * @miic_port_start: MIIC port start number
> - * @miic_port_max: Maximum MIIC supported
> + * @miic_port_last: MIIC port last number
>   * @sw_mode_mask: Switch mode mask
>   * @reset_ids: Reset names array
>   * @reset_count: Number of entries in the reset_ids array
> @@ -240,7 +240,7 @@ struct miic_of_data {
>         const char * const *index_to_string;
>         u8 index_to_string_count;
>         u8 miic_port_start;
> -       u8 miic_port_max;
> +       u8 miic_port_last;
>         u8 sw_mode_mask;
>         const char * const *reset_ids;
>         u8 reset_count;
> @@ -485,7 +485,7 @@ struct phylink_pcs *miic_create(struct device *dev, struct device_node *np)
>
>         miic = platform_get_drvdata(pdev);
>         of_data = miic->of_data;
> -       if (port > of_data->miic_port_max || port < of_data->miic_port_start) {
> +       if (port > of_data->miic_port_last || port < of_data->miic_port_start) {
>                 put_device(&pdev->dev);
>                 return ERR_PTR(-EINVAL);
>         }
> @@ -523,6 +523,7 @@ EXPORT_SYMBOL(miic_destroy);
>  static int miic_init_hw(struct miic *miic, u32 cfg_mode)
>  {
>         u8 sw_mode_mask = miic->of_data->sw_mode_mask;
> +       int num_ports;
>         int port;
>
>         /* Unlock write access to accessory registers (cf datasheet). If this
> @@ -538,7 +539,10 @@ static int miic_init_hw(struct miic *miic, u32 cfg_mode)
>         miic_reg_writel(miic, MIIC_MODCTRL,
>                         ((cfg_mode << __ffs(sw_mode_mask)) & sw_mode_mask));
>
> -       for (port = 0; port < miic->of_data->miic_port_max; port++) {
> +       num_ports = miic->of_data->miic_port_last -
> +               miic->of_data->miic_port_start + 1;
> +
> +       for (port = 0; port < num_ports; port++) {
>                 miic_converter_enable(miic, port, 0);
>                 /* Disable speed/duplex control from these registers, datasheet
>                  * says switch registers should be used to setup switch port
> @@ -825,7 +829,7 @@ static struct miic_of_data rzn1_miic_of_data = {
>         .index_to_string = index_to_string,
>         .index_to_string_count = ARRAY_SIZE(index_to_string),
>         .miic_port_start = 1,
> -       .miic_port_max = 5,
> +       .miic_port_last = 5,
>         .sw_mode_mask = GENMASK(4, 0),
>         .init_unlock_lock_regs = true,
>         .miic_write = miic_reg_writel_unlocked,
> @@ -841,7 +845,7 @@ static struct miic_of_data rzt2h_miic_of_data = {
>         .index_to_string = rzt2h_index_to_string,
>         .index_to_string_count = ARRAY_SIZE(rzt2h_index_to_string),
>         .miic_port_start = 0,
> -       .miic_port_max = 4,
> +       .miic_port_last = 3,
>         .sw_mode_mask = GENMASK(2, 0),
>         .reset_ids = rzt2h_reset_ids,
>         .reset_count = ARRAY_SIZE(rzt2h_reset_ids),
>
> --
> 2.43.0
>
>
>

[PATCH net-next v3 2/2] net: pcs: rzn1-miic: Validate dtb configuration values

[Kyle Hendry via B4 Relay]

From: Kyle Hendry <khendry@reliablecontrols.com>

Bad configuration values from the dtb could result in out of bounds array
access. Verify parsed values are within range for the SoC and fail the
probe if invalid.

Signed-off-by: Kyle Hendry <khendry@reliablecontrols.com>
---
 drivers/net/pcs/pcs-rzn1-miic.c | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/net/pcs/pcs-rzn1-miic.c b/drivers/net/pcs/pcs-rzn1-miic.c
index 31716241b58f..10622eb654d2 100644
--- a/drivers/net/pcs/pcs-rzn1-miic.c
+++ b/drivers/net/pcs/pcs-rzn1-miic.c
@@ -693,16 +693,40 @@ static int miic_parse_dt(struct miic *miic, u32 *mode_cfg)
 	memset(dt_val, MIIC_MODCTRL_CONF_NONE,
 	       sizeof(*dt_val) * miic->of_data->conf_conv_count);
 
-	if (of_property_read_u32(np, "renesas,miic-switch-portin", &conf) == 0)
-		dt_val[0] = conf;
+	if (of_property_read_u32(np, "renesas,miic-switch-portin", &conf) == 0) {
+		if (conf >= miic->of_data->conf_to_string_count) {
+			dev_err(miic->dev, "Port input configuration out of range: %d\n",
+				conf);
+			ret = -EINVAL;
+			goto err;
+		} else {
+			dt_val[0] = conf;
+		}
+	}
 
 	for_each_available_child_of_node(np, conv) {
 		if (of_property_read_u32(conv, "reg", &port))
 			continue;
 
+		if (port < miic->of_data->miic_port_start ||
+		    port > miic->of_data->miic_port_last) {
+			dev_err(miic->dev, "Port number out of range: %d\n", port);
+			of_node_put(conv);
+			ret = -EINVAL;
+			goto err;
+		}
+
 		if (of_property_read_u32(conv, "renesas,miic-input", &conf))
 			continue;
 
+		if (conf >= miic->of_data->conf_to_string_count) {
+			dev_err(miic->dev, "Port %d configuration out of range: %d\n",
+				port, conf);
+			of_node_put(conv);
+			ret = -EINVAL;
+			goto err;
+		}
+
 		/* Adjust for 0 based index */
 		dt_val[port + !miic->of_data->miic_port_start] = conf;
 
@@ -712,6 +736,7 @@ static int miic_parse_dt(struct miic *miic, u32 *mode_cfg)
 	}
 
 	ret = miic_match_dt_conf(miic, dt_val, mode_cfg);
+err:
 	kfree(dt_val);
 
 	return ret;

-- 
2.43.0

[PATCH net-next v3 2/2] net: pcs: rzn1-miic: Validate dtb configuration values

[Kyle Hendry]

Bad configuration values from the dtb could result in out of bounds array
access. Verify parsed values are within range for the SoC and fail the
probe if invalid.

Signed-off-by: Kyle Hendry <khendry@reliablecontrols.com>
---
 drivers/net/pcs/pcs-rzn1-miic.c | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/net/pcs/pcs-rzn1-miic.c b/drivers/net/pcs/pcs-rzn1-miic.c
index 31716241b58f..10622eb654d2 100644
--- a/drivers/net/pcs/pcs-rzn1-miic.c
+++ b/drivers/net/pcs/pcs-rzn1-miic.c
@@ -693,16 +693,40 @@ static int miic_parse_dt(struct miic *miic, u32 *mode_cfg)
 	memset(dt_val, MIIC_MODCTRL_CONF_NONE,
 	       sizeof(*dt_val) * miic->of_data->conf_conv_count);
 
-	if (of_property_read_u32(np, "renesas,miic-switch-portin", &conf) == 0)
-		dt_val[0] = conf;
+	if (of_property_read_u32(np, "renesas,miic-switch-portin", &conf) == 0) {
+		if (conf >= miic->of_data->conf_to_string_count) {
+			dev_err(miic->dev, "Port input configuration out of range: %d\n",
+				conf);
+			ret = -EINVAL;
+			goto err;
+		} else {
+			dt_val[0] = conf;
+		}
+	}
 
 	for_each_available_child_of_node(np, conv) {
 		if (of_property_read_u32(conv, "reg", &port))
 			continue;
 
+		if (port < miic->of_data->miic_port_start ||
+		    port > miic->of_data->miic_port_last) {
+			dev_err(miic->dev, "Port number out of range: %d\n", port);
+			of_node_put(conv);
+			ret = -EINVAL;
+			goto err;
+		}
+
 		if (of_property_read_u32(conv, "renesas,miic-input", &conf))
 			continue;
 
+		if (conf >= miic->of_data->conf_to_string_count) {
+			dev_err(miic->dev, "Port %d configuration out of range: %d\n",
+				port, conf);
+			of_node_put(conv);
+			ret = -EINVAL;
+			goto err;
+		}
+
 		/* Adjust for 0 based index */
 		dt_val[port + !miic->of_data->miic_port_start] = conf;
 
@@ -712,6 +736,7 @@ static int miic_parse_dt(struct miic *miic, u32 *mode_cfg)
 	}
 
 	ret = miic_match_dt_conf(miic, dt_val, mode_cfg);
+err:
 	kfree(dt_val);
 
 	return ret;

-- 
2.43.0

Re: [PATCH net-next v3 2/2] net: pcs: rzn1-miic: Validate dtb configuration values

[Simon Horman]

On Tue, Oct 06, 2026 at 09:48:12AM -0700, Kyle Hendry via B4 Relay wrote:
> From: Kyle Hendry <khendry@reliablecontrols.com>
> 
> Bad configuration values from the dtb could result in out of bounds array
> access. Verify parsed values are within range for the SoC and fail the
> probe if invalid.
> 
> Signed-off-by: Kyle Hendry <khendry@reliablecontrols.com>
> ---
>  drivers/net/pcs/pcs-rzn1-miic.c | 29 +++++++++++++++++++++++++++--
>  1 file changed, 27 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/pcs/pcs-rzn1-miic.c b/drivers/net/pcs/pcs-rzn1-miic.c
> index 31716241b58f..10622eb654d2 100644
> --- a/drivers/net/pcs/pcs-rzn1-miic.c
> +++ b/drivers/net/pcs/pcs-rzn1-miic.c
> @@ -693,16 +693,40 @@ static int miic_parse_dt(struct miic *miic, u32 *mode_cfg)
>  	memset(dt_val, MIIC_MODCTRL_CONF_NONE,
>  	       sizeof(*dt_val) * miic->of_data->conf_conv_count);
>  
> -	if (of_property_read_u32(np, "renesas,miic-switch-portin", &conf) == 0)
> -		dt_val[0] = conf;
> +	if (of_property_read_u32(np, "renesas,miic-switch-portin", &conf) == 0) {
> +		if (conf >= miic->of_data->conf_to_string_count) {
> +			dev_err(miic->dev, "Port input configuration out of range: %d\n",
> +				conf);
> +			ret = -EINVAL;
> +			goto err;
> +		} else {
> +			dt_val[0] = conf;
> +		}
> +	}

Hi Kyle,

Please drop the else arm here, it is unnecessary.

Doing so will move the code into the preferred style
of handling errors conditionally while keeping
the main thread of execution outside (extra) conditions.

(Completely untested, but I mean like this.)

	if (of_property_read_u32(np, "renesas,miic-switch-portin", &conf) == 0) {
		if (conf >= miic->of_data->conf_to_string_count) {
			dev_err(miic->dev, "Port input configuration out of range: %d\n",
				conf);
			ret = -EINVAL;
			goto err;
		}
		dt_val[0] = conf;
	}

With that change, feel free to add:

Reviewed-by: Simon Horman <horms@kernel.org>

-- 
pw-bot: changes-requested

Re: [PATCH net-next v3 2/2] net: pcs: rzn1-miic: Validate dtb configuration values

[Lad, Prabhakar]

On Tue, Oct 6, 2026 at 5:48 PM Kyle Hendry via B4 Relay
<devnull+khendry.reliablecontrols.com@kernel.org> wrote:
>
> From: Kyle Hendry <khendry@reliablecontrols.com>
>
> Bad configuration values from the dtb could result in out of bounds array
> access. Verify parsed values are within range for the SoC and fail the
> probe if invalid.
>
> Signed-off-by: Kyle Hendry <khendry@reliablecontrols.com>
> ---
>  drivers/net/pcs/pcs-rzn1-miic.c | 29 +++++++++++++++++++++++++++--
>  1 file changed, 27 insertions(+), 2 deletions(-)
>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Cheers,
Prabhakar

> diff --git a/drivers/net/pcs/pcs-rzn1-miic.c b/drivers/net/pcs/pcs-rzn1-miic.c
> index 31716241b58f..10622eb654d2 100644
> --- a/drivers/net/pcs/pcs-rzn1-miic.c
> +++ b/drivers/net/pcs/pcs-rzn1-miic.c
> @@ -693,16 +693,40 @@ static int miic_parse_dt(struct miic *miic, u32 *mode_cfg)
>         memset(dt_val, MIIC_MODCTRL_CONF_NONE,
>                sizeof(*dt_val) * miic->of_data->conf_conv_count);
>
> -       if (of_property_read_u32(np, "renesas,miic-switch-portin", &conf) == 0)
> -               dt_val[0] = conf;
> +       if (of_property_read_u32(np, "renesas,miic-switch-portin", &conf) == 0) {
> +               if (conf >= miic->of_data->conf_to_string_count) {
> +                       dev_err(miic->dev, "Port input configuration out of range: %d\n",
> +                               conf);
> +                       ret = -EINVAL;
> +                       goto err;
> +               } else {
> +                       dt_val[0] = conf;
> +               }
> +       }
>
>         for_each_available_child_of_node(np, conv) {
>                 if (of_property_read_u32(conv, "reg", &port))
>                         continue;
>
> +               if (port < miic->of_data->miic_port_start ||
> +                   port > miic->of_data->miic_port_last) {
> +                       dev_err(miic->dev, "Port number out of range: %d\n", port);
> +                       of_node_put(conv);
> +                       ret = -EINVAL;
> +                       goto err;
> +               }
> +
>                 if (of_property_read_u32(conv, "renesas,miic-input", &conf))
>                         continue;
>
> +               if (conf >= miic->of_data->conf_to_string_count) {
> +                       dev_err(miic->dev, "Port %d configuration out of range: %d\n",
> +                               port, conf);
> +                       of_node_put(conv);
> +                       ret = -EINVAL;
> +                       goto err;
> +               }
> +
>                 /* Adjust for 0 based index */
>                 dt_val[port + !miic->of_data->miic_port_start] = conf;
>
> @@ -712,6 +736,7 @@ static int miic_parse_dt(struct miic *miic, u32 *mode_cfg)
>         }
>
>         ret = miic_match_dt_conf(miic, dt_val, mode_cfg);
> +err:
>         kfree(dt_val);
>
>         return ret;
>
> --
> 2.43.0
>
>
>