[PATCH v3 01/11] hwmon: chipcap2: fix command error diagnostics

[Javier Carrasco <javier.carrasco.cruz@gmail.com>]

The command response field only contains bits 1:0, while the
error flags are stored in bits 2:5. The existing diagnostic
checks test the extracted response field, so they can never report
an error flag.

Test the full status byte for the error flags, and check the
configuration-load flag instead of RAM parity for the last diagnostic.

Fixes: 3af350929e75 ("hwmon: Add support for Amphenol ChipCap 2")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
---
 drivers/hwmon/chipcap2.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/chipcap2.c b/drivers/hwmon/chipcap2.c
index 9bef767b589e..855057892852 100644
--- a/drivers/hwmon/chipcap2.c
+++ b/drivers/hwmon/chipcap2.c
@@ -167,13 +167,13 @@ static int cc2_cmd_response_diagnostic(struct device *dev, u8 status)
 	case CC2_RESPONSE_BUSY:
 		return -EBUSY;
 	case CC2_RESPONSE_NACK:
-		if (resp & CC2_ERR_CORR_EEPROM)
+		if (status & CC2_ERR_CORR_EEPROM)
 			dev_dbg(dev, "Command failed: corrected EEPROM\n");
-		if (resp & CC2_ERR_UNCORR_EEPROM)
+		if (status & CC2_ERR_UNCORR_EEPROM)
 			dev_dbg(dev, "Command failed: uncorrected EEPROM\n");
-		if (resp & CC2_ERR_RAM_PARITY)
+		if (status & CC2_ERR_RAM_PARITY)
 			dev_dbg(dev, "Command failed: RAM parity\n");
-		if (resp & CC2_ERR_RAM_PARITY)
+		if (status & CC2_ERR_CONFIG_LOAD)
 			dev_dbg(dev, "Command failed: configuration error\n");
 		return -ENODATA;
 	default:

-- 
2.43.0