All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tariq Toukan <tariqt@nvidia.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, <netdev@vger.kernel.org>,
	Paolo Abeni <pabeni@redhat.com>
Cc: Dragos Tatulea <dtatulea@nvidia.com>,
	Gal Pressman <gal@nvidia.com>, "Joe Damato" <joe@dama.to>,
	Leon Romanovsky <leon@kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	<linux-rdma@vger.kernel.org>, Mark Bloch <mbloch@nvidia.com>,
	"Nabil S. Alramli" <dev@nalramli.com>,
	Rahul Rameshbabu <rrameshbabu@nvidia.com>,
	Saeed Mahameed <saeedm@nvidia.com>,
	Tariq Toukan <tariqt@nvidia.com>,
	Yael Chemla <ychemla@nvidia.com>
Subject: [PATCH net 1/3] net/mlx5e: Sync CQE moderation pflags with coalesce params
Date: Wed, 14 Oct 2026 15:47:02 +0300	[thread overview]
Message-ID: <20261014124704.1017782-2-tariqt@nvidia.com> (raw)
In-Reply-To: <20261014124704.1017782-1-tariqt@nvidia.com>

From: Yael Chemla <ychemla@nvidia.com>

mlx5e_params keeps two representations of CQE moderation: the private
flags (MLX5E_PFLAG_RX_CQE_BASED_MODER, MLX5E_PFLAG_TX_CQE_BASED_MODER)
and the fields rx_moder_use_cqe_mode / tx_moder_use_cqe_mode, which are
used by ethtool get/set coalesce. Both are used by the driver (ethtool
get/set coalesce, channel open, moderation apply). When they disagree,
CQE moderation reported value is wrong.

Such an issue can be seen on channel attach or reopen:
mlx5e_build_nic_params() runs and sets rx_moder_use_cqe_mode and
tx_moder_use_cqe_mode from device capability but did not set the
corresponding pflags. So after attach/reopen, pflags could remain zero
while the fields reflected hardware configuration.

Fix by syncing pflags in build_nic_params from the capability-derived
fields.

Reproducer:

    ethtool --show-priv-flags eth2 | grep rx_cqe_moder
      rx_cqe_moder       : off
    ethtool --coalesce eth2 adaptive-tx off
    ethtool --show-priv-flags eth2 | grep rx_cqe_moder
      rx_cqe_moder       : on

Fixes: 445a25f6e1a2 ("net/mlx5e: Support updating coalescing configuration without resetting channels")
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 4c6060d54fbe..9fcea0395137 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -5407,6 +5407,10 @@ void mlx5e_build_nic_params(struct mlx5e_priv *priv, struct mlx5e_xsk *xsk, u16
 				 MLX5_CAP_GEN(mdev, cq_period_mode_modify);
 	params->rx_moder_use_cqe_mode = !!MLX5_CAP_GEN(mdev, cq_period_start_from_cqe);
 	params->tx_moder_use_cqe_mode = false;
+	MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_CQE_BASED_MODER,
+			params->rx_moder_use_cqe_mode);
+	MLX5E_SET_PFLAG(params, MLX5E_PFLAG_TX_CQE_BASED_MODER,
+			params->tx_moder_use_cqe_mode);
 	mlx5e_reset_rx_moderation(&params->rx_cq_moderation, params->rx_moder_use_cqe_mode,
 				  params->rx_dim_enabled);
 	mlx5e_reset_tx_moderation(&params->tx_cq_moderation, params->tx_moder_use_cqe_mode,
-- 
2.44.0


  reply	other threads:[~2026-10-14 12:48 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-14 12:47 [PATCH net 0/3] net/mlx5e: Fix CQE moderation mode reporting and control Tariq Toukan
2026-10-14 12:47 ` Tariq Toukan [this message]
2026-10-15 12:48   ` [PATCH net 1/3] net/mlx5e: Sync CQE moderation pflags with coalesce params sashiko-bot
2026-10-14 12:47 ` [PATCH net 2/3] net/mlx5e: Sync CQE moderation params with pflags in set_pflag_cqe_based_moder Tariq Toukan
2026-10-15 12:48   ` sashiko-bot
2026-10-14 12:47 ` [PATCH net 3/3] net/mlx5e: Expose CQE moderation mode on representors Tariq Toukan
2026-10-15 12:48   ` sashiko-bot
2026-10-14 12:55 ` [PATCH net 0/3] net/mlx5e: Fix CQE moderation mode reporting and control netdev-bot+sinfo
2026-10-20  6:33 ` Tariq Toukan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261014124704.1017782-2-tariqt@nvidia.com \
    --to=tariqt@nvidia.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=dev@nalramli.com \
    --cc=dtatulea@nvidia.com \
    --cc=edumazet@kernel.org \
    --cc=gal@nvidia.com \
    --cc=joe@dama.to \
    --cc=kuba@kernel.org \
    --cc=leon@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=mbloch@nvidia.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=rrameshbabu@nvidia.com \
    --cc=saeedm@nvidia.com \
    --cc=ychemla@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.