[PATCH] iio: ccs811: Deassert WAKE GPIO on error paths

[Nikhil Gautam <nikhilgtr@gmail.com>]

Ensure the WAKE GPIO is deasserted when status polling fails or
the data-ready timeout expires. Early returns could leave WAKE asserted,
preventing the sensor from returning to its low-power state and
potentially disrupting subsequent I2C transactions.

Route error paths through a common cleanup label to ensure WAKE is
deasserted before returning.

Signed-off-by: Nikhil Gautam <nikhilgtr@gmail.com>
---
 drivers/iio/chemical/ccs811.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/chemical/ccs811.c b/drivers/iio/chemical/ccs811.c
index 998c9239c4c7..94c83937d1d7 100644
--- a/drivers/iio/chemical/ccs811.c
+++ b/drivers/iio/chemical/ccs811.c
@@ -198,20 +198,22 @@ static int ccs811_get_measurement(struct ccs811_data *data)
 	while (tries-- > 0) {
 		ret = i2c_smbus_read_byte_data(data->client, CCS811_STATUS);
 		if (ret < 0)
-			return ret;
+			goto out;
 
 		if ((ret & CCS811_STATUS_DATA_READY) || tries == 0)
 			break;
 		msleep(100);
 	}
-	if (!(ret & CCS811_STATUS_DATA_READY))
-		return -EIO;
+	if (!(ret & CCS811_STATUS_DATA_READY)) {
+		ret = -EIO;
+		goto out;
+	}
 
 	ret = i2c_smbus_read_i2c_block_data(data->client,
 					    CCS811_ALG_RESULT_DATA, 8,
 					    (char *)&data->buffer);
+out:
 	ccs811_set_wakeup(data, false);
-
 	return ret;
 }
 
-- 
2.39.5