All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dinh Nguyen <dinguyen@kernel.org>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: dinguyen@kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 2/2] arm64: dts: altera: Add support for the Agilex27 platform
Date: Thu, 15 Oct 2026 07:37:00 -0500	[thread overview]
Message-ID: <20261015123700.2137706-2-dinguyen@kernel.org> (raw)
In-Reply-To: <20261015123700.2137706-1-dinguyen@kernel.org>

The Agilex72 platform is being rebranded to Agilex27. The Agilex27 is
exactly the same as the Agilex72. Add the base DTSI and the devkit's
DTS.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: leave the agilex72 files
---
 arch/arm64/boot/dts/altera/Makefile           |   1 +
 .../boot/dts/altera/socfpga_agilex27.dtsi     | 156 ++++++++++++++++++
 .../dts/altera/socfpga_agilex27_socdk.dts     |  27 +++
 3 files changed, 184 insertions(+)
 create mode 100644 arch/arm64/boot/dts/altera/socfpga_agilex27.dtsi
 create mode 100644 arch/arm64/boot/dts/altera/socfpga_agilex27_socdk.dts

diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
index 8f41349103b80..14e260fb16f3b 100644
--- a/arch/arm64/boot/dts/altera/Makefile
+++ b/arch/arm64/boot/dts/altera/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
 				socfpga_agilex_socdk.dtb \
 				socfpga_agilex_socdk_emmc.dtb \
 				socfpga_agilex_socdk_nand.dtb \
+				socfpga_agilex27_socdk.dtb \
 				socfpga_agilex3_socdk.dtb \
 				socfpga_agilex5_socdk.dtb \
 				socfpga_agilex5_socdk_013b.dtb \
diff --git a/arch/arm64/boot/dts/altera/socfpga_agilex27.dtsi b/arch/arm64/boot/dts/altera/socfpga_agilex27.dtsi
new file mode 100644
index 0000000000000..369981fe85e38
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_agilex27.dtsi
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026, Altera Corporation
+ */
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "altr,socfpga-agilex27";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		atf_reserved: atf@80000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x100000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		service_reserved: svcbuffer@80100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80100000 0x0 0xf00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a520";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a520";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a720";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x200>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a720";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x300>;
+		};
+	};
+
+	clocks {
+		uart_clk: uart-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	intc: interrupt-controller@7000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x7000000 0x0 0x10000>,
+		      <0x0 0x7080000 0x0 0x100000>;
+		ranges;
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		redistributor-stride = <0x0 0x40000>;
+
+		its: msi-controller@7040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0x7040000 0x0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+
+		smmu: iommu@c100000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0c100000 0x30000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror", "priq";
+			dma-coherent;
+			#iommu-cells = <1>;
+		};
+
+		ocram: sram@0 {
+			compatible = "mmio-sram";
+			reg = <0x00000000 0x80000>;
+			ranges = <0 0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		uart0: serial@9038000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x9038000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@9039000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x9039000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_agilex27_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_agilex27_socdk.dts
new file mode 100644
index 0000000000000..15d331cdeeb47
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_agilex27_socdk.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026, Altera Corporation
+ */
+#include "socfpga_agilex27.dtsi"
+
+/ {
+	model = "Altera SoCFPGA Agilex27 SoCDK";
+	compatible = "altr,socfpga-agilex27-socdk", "altr,socfpga-agilex27";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
-- 
2.42.0.411.g813d9a9188


  reply	other threads:[~2026-10-15 12:38 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-15 12:36 [PATCHv2 1/2] dt-bindings: arm: altera: document the Agilex27 platform Dinh Nguyen
2026-10-15 12:37 ` Dinh Nguyen [this message]
2026-10-15 12:48   ` [PATCHv2 2/2] arm64: dts: altera: Add support for " sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261015123700.2137706-2-dinguyen@kernel.org \
    --to=dinguyen@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.