All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pablo Mazzini <pmazzini@gmail.com>
To: Andre Przywara <andre.przywara@arm.com>, u-boot@lists.u-boot-project.org
Cc: Tom Rini <trini@konsulko.com>,
	linux-sunxi@lists.linux.dev, Lukasz Majewski <lukma@nabladev.com>
Subject: [PATCH 4/7] clk: sunxi: add the Allwinner B288 gates and resets
Date: Fri, 16 Oct 2026 10:16:05 +0100	[thread overview]
Message-ID: <20261016091608.121842-5-pmazzini@gmail.com> (raw)
In-Reply-To: <20261016091608.121842-1-pmazzini@gmail.com>

The bus clock gates and resets, as in the Linux CCU driver.

Signed-off-by: Pablo Mazzini <pmazzini@gmail.com>
---
 drivers/clk/sunxi/Kconfig     |   7 +++
 drivers/clk/sunxi/Makefile    |   1 +
 drivers/clk/sunxi/clk_b288.c  | 101 ++++++++++++++++++++++++++++++++++
 drivers/clk/sunxi/clk_sunxi.c |   5 ++
 4 files changed, 114 insertions(+)
 create mode 100644 drivers/clk/sunxi/clk_b288.c

diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
index 1c1cc82719c..e4fe6f63626 100644
--- a/drivers/clk/sunxi/Kconfig
+++ b/drivers/clk/sunxi/Kconfig
@@ -52,6 +52,13 @@ config CLK_SUN8I_A23
 	  This enables common clock driver support for platforms based
 	  on Allwinner A23/A33 SoC.
 
+config CLK_SUN8I_B288
+	bool "Clock driver for Allwinner B288"
+	default MACH_SUN8I_B288
+	help
+	  This enables common clock driver support for platforms based
+	  on Allwinner B288 SoC.
+
 config CLK_SUN8I_A83T
 	bool "Clock driver for Allwinner A83T"
 	default MACH_SUN8I_A83T
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 93b542cebcd..4f278ff551a 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CLK_SUN6I_A31) += clk_a31.o
 obj-$(CONFIG_CLK_SUN6I_A31_R) += clk_a31_r.o
 obj-$(CONFIG_CLK_SUN8I_A23) += clk_a23.o
 obj-$(CONFIG_CLK_SUN8I_A83T) += clk_a83t.o
+obj-$(CONFIG_CLK_SUN8I_B288) += clk_b288.o
 obj-$(CONFIG_CLK_SUN8I_R40) += clk_r40.o
 obj-$(CONFIG_CLK_SUN8I_V3S) += clk_v3s.o
 obj-$(CONFIG_CLK_SUN9I_A80) += clk_a80.o
diff --git a/drivers/clk/sunxi/clk_b288.c b/drivers/clk/sunxi/clk_b288.c
new file mode 100644
index 00000000000..505fa27f83a
--- /dev/null
+++ b/drivers/clk/sunxi/clk_b288.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Allwinner B288 (sun8iw10p1) CCU gates and resets
+ */
+
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <clk/sunxi.h>
+#include <dt-bindings/clock/sun8i-b288-ccu.h>
+#include <dt-bindings/reset/sun8i-b288-ccu.h>
+#include <linux/bitops.h>
+
+static const struct ccu_clk_gate b288_gates[] = {
+	[CLK_BUS_DMA]		= GATE(0x060, BIT(6)),
+	[CLK_BUS_SDMMC0_BUS]	= GATE(0x060, BIT(8)),
+	[CLK_BUS_SDMMC1_BUS]	= GATE(0x060, BIT(9)),
+	[CLK_BUS_SDMMC2_BUS]	= GATE(0x060, BIT(10)),
+	[CLK_BUS_SDMMC3_BUS]	= GATE(0x060, BIT(11)),
+	[CLK_BUS_NAND]		= GATE(0x060, BIT(13)),
+	[CLK_BUS_SDRAM]		= GATE(0x060, BIT(14)),
+	[CLK_BUS_PSRAM]		= GATE(0x060, BIT(15)),
+	[CLK_BUS_SPI0]		= GATE(0x060, BIT(20)),
+	[CLK_BUS_SPI1]		= GATE(0x060, BIT(21)),
+	[CLK_BUS_SPI2]		= GATE(0x060, BIT(22)),
+	[CLK_BUS_USBOTG]	= GATE(0x060, BIT(24)),
+	[CLK_BUS_USBEHCI0]	= GATE(0x060, BIT(26)),
+	[CLK_BUS_USBOHCI0]	= GATE(0x060, BIT(29)),
+	[CLK_BUS_TCON0]		= GATE(0x064, BIT(4)),
+	[CLK_BUS_CSI]		= GATE(0x064, BIT(8)),
+	[CLK_BUS_DE]		= GATE(0x064, BIT(12)),
+	[CLK_BUS_EE]		= GATE(0x064, BIT(13)),
+	[CLK_BUS_ADDA]		= GATE(0x068, BIT(0)),
+	[CLK_BUS_SPDIF]		= GATE(0x068, BIT(1)),
+	[CLK_BUS_DSD]		= GATE(0x068, BIT(2)),
+	[CLK_BUS_DMIC]		= GATE(0x068, BIT(3)),
+	[CLK_BUS_PIO]		= GATE(0x068, BIT(5)),
+	[CLK_BUS_THS]		= GATE(0x068, BIT(8)),
+	[CLK_BUS_KEYADC]	= GATE(0x068, BIT(9)),
+	[CLK_BUS_GPADC]		= GATE(0x068, BIT(10)),
+	[CLK_BUS_I2S0]		= GATE(0x068, BIT(12)),
+	[CLK_BUS_I2S1]		= GATE(0x068, BIT(13)),
+	[CLK_BUS_TWI0]		= GATE(0x06c, BIT(0)),
+	[CLK_BUS_TWI1]		= GATE(0x06c, BIT(1)),
+	[CLK_BUS_TWI2]		= GATE(0x06c, BIT(2)),
+	[CLK_BUS_UART0]		= GATE(0x06c, BIT(16)),
+	[CLK_BUS_UART1]		= GATE(0x06c, BIT(17)),
+	[CLK_BUS_UART2]		= GATE(0x06c, BIT(18)),
+	[CLK_BUS_UART3]		= GATE(0x06c, BIT(19)),
+	[CLK_BUS_UART4]		= GATE(0x06c, BIT(20)),
+	[CLK_BUS_UART5]		= GATE(0x06c, BIT(21)),
+};
+
+static const struct ccu_reset b288_resets[] = {
+	[RST_USBPHY0]		= RESET(0x0cc, BIT(0)),
+	[RST_MBUS]		= RESET(0x0fc, BIT(31)),
+	[RST_BUS_DMA]		= RESET(0x2c0, BIT(6)),
+	[RST_BUS_MMC0]		= RESET(0x2c0, BIT(8)),
+	[RST_BUS_MMC1]		= RESET(0x2c0, BIT(9)),
+	[RST_BUS_MMC2]		= RESET(0x2c0, BIT(10)),
+	[RST_BUS_MMC3]		= RESET(0x2c0, BIT(11)),
+	[RST_BUS_NAND]		= RESET(0x2c0, BIT(13)),
+	[RST_BUS_DRAM]		= RESET(0x2c0, BIT(14)),
+	[RST_BUS_PSRAM]		= RESET(0x2c0, BIT(15)),
+	[RST_BUS_SPI0]		= RESET(0x2c0, BIT(20)),
+	[RST_BUS_SPI1]		= RESET(0x2c0, BIT(21)),
+	[RST_BUS_SPI2]		= RESET(0x2c0, BIT(22)),
+	[RST_BUS_OTG]		= RESET(0x2c0, BIT(24)),
+	[RST_BUS_EHCI0]		= RESET(0x2c0, BIT(26)),
+	[RST_BUS_OHCI0]		= RESET(0x2c0, BIT(29)),
+	[RST_BUS_WLAN]		= RESET(0x2c4, BIT(1)),
+	[RST_BUS_TCON0]		= RESET(0x2c4, BIT(4)),
+	[RST_BUS_CSI]		= RESET(0x2c4, BIT(8)),
+	[RST_BUS_DE]		= RESET(0x2c4, BIT(12)),
+	[RST_BUS_EE]		= RESET(0x2c4, BIT(13)),
+	[RST_BUS_ADDA]		= RESET(0x2d0, BIT(0)),
+	[RST_BUS_SPDIF]		= RESET(0x2d0, BIT(1)),
+	[RST_BUS_DSD]		= RESET(0x2d0, BIT(2)),
+	[RST_BUS_DMIC]		= RESET(0x2d0, BIT(3)),
+	[RST_BUS_THS]		= RESET(0x2d0, BIT(8)),
+	[RST_BUS_KEYADC]	= RESET(0x2d0, BIT(9)),
+	[RST_BUS_GPADC]		= RESET(0x2d0, BIT(10)),
+	[RST_BUS_I2S0]		= RESET(0x2d0, BIT(12)),
+	[RST_BUS_I2S1]		= RESET(0x2d0, BIT(13)),
+	[RST_BUS_I2C0]		= RESET(0x2d8, BIT(0)),
+	[RST_BUS_I2C1]		= RESET(0x2d8, BIT(1)),
+	[RST_BUS_I2C2]		= RESET(0x2d8, BIT(2)),
+	[RST_BUS_UART0]		= RESET(0x2d8, BIT(16)),
+	[RST_BUS_UART1]		= RESET(0x2d8, BIT(17)),
+	[RST_BUS_UART2]		= RESET(0x2d8, BIT(18)),
+	[RST_BUS_UART3]		= RESET(0x2d8, BIT(19)),
+	[RST_BUS_UART4]		= RESET(0x2d8, BIT(20)),
+	[RST_BUS_UART5]		= RESET(0x2d8, BIT(21)),
+};
+
+const struct ccu_desc b288_ccu_desc = {
+	.gates = b288_gates,
+	.resets = b288_resets,
+	.num_gates = ARRAY_SIZE(b288_gates),
+	.num_resets = ARRAY_SIZE(b288_resets),
+};
diff --git a/drivers/clk/sunxi/clk_sunxi.c b/drivers/clk/sunxi/clk_sunxi.c
index 046d5d1605a..5f40f30fe89 100644
--- a/drivers/clk/sunxi/clk_sunxi.c
+++ b/drivers/clk/sunxi/clk_sunxi.c
@@ -117,6 +117,7 @@ extern const struct ccu_desc a64_ccu_desc;
 extern const struct ccu_desc a80_ccu_desc;
 extern const struct ccu_desc a80_mmc_clk_desc;
 extern const struct ccu_desc a83t_ccu_desc;
+extern const struct ccu_desc b288_ccu_desc;
 extern const struct ccu_desc d1_ccu_desc;
 extern const struct ccu_desc f1c100s_ccu_desc;
 extern const struct ccu_desc h3_ccu_desc;
@@ -154,6 +155,10 @@ static const struct udevice_id sunxi_clk_ids[] = {
 	{ .compatible = "allwinner,sun8i-a33-ccu",
 	  .data = (ulong)&a23_ccu_desc },
 #endif
+#ifdef CONFIG_CLK_SUN8I_B288
+	{ .compatible = "allwinner,sun8i-b288-ccu",
+	  .data = (ulong)&b288_ccu_desc },
+#endif
 #ifdef CONFIG_CLK_SUN8I_A83T
 	{ .compatible = "allwinner,sun8i-a83t-ccu",
 	  .data = (ulong)&a83t_ccu_desc },
-- 
2.52.0


  parent reply	other threads:[~2026-10-16  9:17 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-16  9:16 [PATCH 0/7] sunxi: add the Allwinner B288 and the PocketBook Verse Pablo Mazzini
2026-10-16  9:16 ` [PATCH 1/7] sunxi: add support for the Allwinner B288 Pablo Mazzini
2026-10-16  9:16 ` [PATCH 2/7] sunxi: dram: support " Pablo Mazzini
2026-10-16  9:16 ` [PATCH 3/7] dt-bindings: clock: add the Allwinner B288 CCU Pablo Mazzini
2026-10-16  9:16 ` Pablo Mazzini [this message]
2026-10-16  9:16 ` [PATCH 5/7] pinctrl: sunxi: add the Allwinner B288 PIO Pablo Mazzini
2026-10-16  9:16 ` [PATCH 6/7] mmc: sunxi: B288 mmc0/mmc1 run off PLL_PERIPH0 2x Pablo Mazzini
2026-10-16  9:16 ` [PATCH 7/7] sunxi: add the PocketBook Verse Pablo Mazzini
2026-10-16 17:28 ` [PATCH 0/7] sunxi: add the Allwinner B288 and " Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261016091608.121842-5-pmazzini@gmail.com \
    --to=pmazzini@gmail.com \
    --cc=andre.przywara@arm.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=lukma@nabladev.com \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.u-boot-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.