From: Nick Xie <nick@khadas.com>
To: neil.armstrong@linaro.org, khilman@baylibre.com
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
jbrunet@baylibre.com, martin.blumenstingl@googlemail.com,
christianshewitt@gmail.com, xianwei.zhao@amlogic.com,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, xieqinick@gmail.com
Subject: [PATCH 2/2] arm64: dts: amlogic-a9-a311y3-khadas-vim-5: add initial device tree
Date: Sat, 17 Oct 2026 12:00:38 +0800 [thread overview]
Message-ID: <20261017040038.3702428-3-nick@khadas.com> (raw)
In-Reply-To: <20261017040038.3702428-1-nick@khadas.com>
The Khadas VIM 5 uses the Amlogic A311Y3 SoC, based on the Amlogic A9
SoC family, on a board with the same form factor as the
VIM/VIM2/VIM3/VIM4/VIM1S models. The serial debug console works with this
initial device tree.
It features:
- 8GB LPDDR5
- 64GB eMMC 5.1 storage
- 32MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6275P Wireless (802.11 a/b/g/n/ac/ax, BT5.1)
- HDMI 2.1 output
- HDMI 2.1 input
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C with USB 3.0/DP/PD
- 2x LEDs (1x red, 1x white)
- 3x buttons (power, function, reset)
- M2 socket with PCIe, USB, ADC & I2C
- 1x 4 lanes MIPI DSI
- 1x 4 lanes MIPI CSI
- 40pin GPIO Header
- 1x micro SD card slot
Signed-off-by: Nick Xie <nick@khadas.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../amlogic-a9-a311y3-khadas-vim-5.dts | 42 +++++++++++++++++++
2 files changed, 43 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 57bc440fa55cc..8b4e3212be131 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -2,6 +2,7 @@
dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-a9-a311y3-by401.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-a9-a311y3-khadas-vim-5.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts
new file mode 100644
index 0000000000000..3989ce7a8aff9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2026 Khadas Technology Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a9.dtsi"
+
+/ {
+ model = "Khadas VIM 5";
+ compatible = "khadas,vim-5", "amlogic,a9";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_b;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0xe0000000>,
+ <0x1 0x0 0x1 0x20000000>; /* 8 GiB */
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 35 MiB reserved for ARM Trusted Firmware */
+ secmon_reserved: secmon@5000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x05000000 0x0 0x2300000>;
+ no-map;
+ };
+ };
+};
+
+&uart_b {
+ status = "okay";
+};
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Nick Xie <nick@khadas.com>
To: neil.armstrong@linaro.org, khilman@baylibre.com
Cc: robh@kernel.org, conor+dt@kernel.org, devicetree@vger.kernel.org,
martin.blumenstingl@googlemail.com, linux-kernel@vger.kernel.org,
xianwei.zhao@amlogic.com, linux-amlogic@lists.infradead.org,
krzk+dt@kernel.org, xieqinick@gmail.com,
linux-arm-kernel@lists.infradead.org, jbrunet@baylibre.com
Subject: [PATCH 2/2] arm64: dts: amlogic-a9-a311y3-khadas-vim-5: add initial device tree
Date: Sat, 17 Oct 2026 12:00:38 +0800 [thread overview]
Message-ID: <20261017040038.3702428-3-nick@khadas.com> (raw)
In-Reply-To: <20261017040038.3702428-1-nick@khadas.com>
The Khadas VIM 5 uses the Amlogic A311Y3 SoC, based on the Amlogic A9
SoC family, on a board with the same form factor as the
VIM/VIM2/VIM3/VIM4/VIM1S models. The serial debug console works with this
initial device tree.
It features:
- 8GB LPDDR5
- 64GB eMMC 5.1 storage
- 32MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6275P Wireless (802.11 a/b/g/n/ac/ax, BT5.1)
- HDMI 2.1 output
- HDMI 2.1 input
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C with USB 3.0/DP/PD
- 2x LEDs (1x red, 1x white)
- 3x buttons (power, function, reset)
- M2 socket with PCIe, USB, ADC & I2C
- 1x 4 lanes MIPI DSI
- 1x 4 lanes MIPI CSI
- 40pin GPIO Header
- 1x micro SD card slot
Signed-off-by: Nick Xie <nick@khadas.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../amlogic-a9-a311y3-khadas-vim-5.dts | 42 +++++++++++++++++++
2 files changed, 43 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 57bc440fa55cc..8b4e3212be131 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -2,6 +2,7 @@
dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-a9-a311y3-by401.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-a9-a311y3-khadas-vim-5.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts
new file mode 100644
index 0000000000000..3989ce7a8aff9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-khadas-vim-5.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2026 Khadas Technology Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a9.dtsi"
+
+/ {
+ model = "Khadas VIM 5";
+ compatible = "khadas,vim-5", "amlogic,a9";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_b;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0xe0000000>,
+ <0x1 0x0 0x1 0x20000000>; /* 8 GiB */
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 35 MiB reserved for ARM Trusted Firmware */
+ secmon_reserved: secmon@5000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x05000000 0x0 0x2300000>;
+ no-map;
+ };
+ };
+};
+
+&uart_b {
+ status = "okay";
+};
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2026-10-17 4:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-17 4:00 [PATCH 0/2] Add initial support for Khadas VIM 5 Nick Xie
2026-10-17 4:00 ` Nick Xie
2026-10-17 4:00 ` [PATCH 1/2] dt-bindings: arm: amlogic: Add " Nick Xie
2026-10-17 4:00 ` Nick Xie
2026-10-17 9:05 ` Krzysztof Kozlowski
2026-10-17 9:05 ` Krzysztof Kozlowski
2026-10-17 4:00 ` Nick Xie [this message]
2026-10-17 4:00 ` [PATCH 2/2] arm64: dts: amlogic-a9-a311y3-khadas-vim-5: add initial device tree Nick Xie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261017040038.3702428-3-nick@khadas.com \
--to=nick@khadas.com \
--cc=christianshewitt@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=xianwei.zhao@amlogic.com \
--cc=xieqinick@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.