[PATCH 1/3] media: ipu-bridge: Add sensor configuration for OV5675 (OVTI5678)

[Alexander Patrakov <patrakov@gmail.com>]

From: Sahan Nissanka <adee.sahan@gmail.com>

The front camera of the Dell Latitude 7320 Detachable is an OV5675
described in ACPI as OVTI5678. Without an entry here ipu-bridge creates
no software node for it, so no fwnode endpoint exists and the sensor
cannot be connected to the IPU6 even once a driver binds it:

  intel-ipu6 0000:00:05.0: Found supported sensor OVTI8856:00
  intel-ipu6 0000:00:05.0: Connected 1 cameras

450 MHz is OV5675_LINK_FREQ_450MHZ, the only link frequency ov5675.c
supports, and matches the two data lanes the machine's SSDB reports.

With this entry both cameras are found and the front sensor appears in
the media graph:

  intel-ipu6 0000:00:05.0: Found supported sensor OVTI5678:00
  intel-ipu6 0000:00:05.0: Found supported sensor OVTI8856:00
  intel-ipu6 0000:00:05.0: Connected 2 cameras

[Rebased onto next-20261016 and adjusted the comment]

Signed-off-by: Sahan Nissanka <adee.sahan@gmail.com>
Signed-off-by: Alexander Patrakov <patrakov@gmail.com>
Link: https://lore.kernel.org/linux-media/20260809042540.15849-4-adee.sahan@gmail.com/
---
 drivers/media/pci/intel/ipu-bridge.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 3739c4a2a8c4..0b6272c4d826 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -111,8 +111,9 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
 	IPU_SENSOR_CONFIG("OVTIDB10", 1, 560000000),
 	/* Omnivision OV2680 */
 	IPU_SENSOR_CONFIG("OVTI2680", 1, 331200000),
-	/* Omnivision OV5675 */
+	/* Omnivision OV5675 and its RGB-IR variant OV5678 */
 	IPU_SENSOR_CONFIG("OVTI5675", 1, 450000000),
+	IPU_SENSOR_CONFIG("OVTI5678", 1, 450000000),
 	/* Omnivision OV5693 */
 	IPU_SENSOR_CONFIG_MATCH_FL("OVTI5693", ipu6_ov5693_ncont_clk,
 				   IPU_BR_FL_CSI2_CLK_NONCONTINUOUS,
-- 
2.56.0