[PATCH 1/2] configs: spacemit: k3: enable spi nor flash in main app

[E Shattow <e@freeshell.de>]

Enable sf command and env storage in SPI NOR flash. SPL is not yet
upstream so this is only in the main app, and depends on vendor SPL for
clocks setup ahead of SPI NOR flash probe.

Signed-off-by: E Shattow <e@freeshell.de>
---
 arch/riscv/cpu/k3/Kconfig     | 1 +
 configs/spacemit_k3_defconfig | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/arch/riscv/cpu/k3/Kconfig b/arch/riscv/cpu/k3/Kconfig
index 5474ac112437..07b490a718dd 100644
--- a/arch/riscv/cpu/k3/Kconfig
+++ b/arch/riscv/cpu/k3/Kconfig
@@ -14,5 +14,6 @@ config SPACEMIT_K3
 	imply RISCV_TIMER if RISCV_SMODE
 	imply CMD_CPU
 	imply OF_UPSTREAM
+	imply SPI
 
 endif
diff --git a/configs/spacemit_k3_defconfig b/configs/spacemit_k3_defconfig
index 586305c62322..b333e708d01b 100644
--- a/configs/spacemit_k3_defconfig
+++ b/configs/spacemit_k3_defconfig
@@ -4,6 +4,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x80000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x102300000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0xa0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="spacemit/k3-pico-itx"
 CONFIG_SYS_BOOTM_LEN=0xa000000
@@ -35,6 +37,8 @@ CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_DEVICE_TREE_INCLUDES="spacemit-k3-u-boot.dtsi"
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_NET_LWIP=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SYSCON=y
@@ -44,6 +48,7 @@ CONFIG_SPACEMIT_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_SPACEMIT_K1=y
 CONFIG_MISC=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_GIGE=y
 CONFIG_DWC_ETH_QOS=y
 CONFIG_DWC_ETH_QOS_SPACEMIT=y
@@ -61,4 +66,5 @@ CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_SYS_NS16550=y
 CONFIG_SYS_NS16550_MEM32=y
+CONFIG_FSL_QSPI=y
 CONFIG_TIMER_EARLY=y
-- 
2.53.0