[PATCH 02/11] USB: serial: io_edgeport: fix potential fifo corruption

[Johan Hovold <johan@kernel.org>]

The device buffer size is determined during open() and the driver
allocates a TX FIFO of corresponding size.

Add the missing sanity check to prevent memory corruption in case a
malicious device sends a second open response with a different buffer
size.

This issue was flagged by Sashiko when reviewing a related fix.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260714101316.823942-1-shpark061104%40gmail.com?part=1
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/io_edgeport.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index cdf41e86ba44..0cc4f41299e0 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -878,7 +878,11 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	}
 
 	/* initialize our port settings */
+	spin_lock_irq(&edge_port->ep_lock);
 	edge_port->txCredits = 0;	/* Can't send any data yet */
+	edge_port->maxTxCredits = 0;
+	spin_unlock_irq(&edge_port->ep_lock);
+
 	/* Must always set this bit to enable ints! */
 	edge_port->shadowMCR = MCR_MASTER_IE;
 	edge_port->chaseResponsePending = false;
@@ -1750,6 +1754,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 	struct tty_struct *tty;
 	struct device *dev;
 	__u8 code = edge_serial->rxStatusCode;
+	unsigned long flags;
 
 	/* switch the port pointer to the one being currently talked about */
 	if (edge_serial->rxPort >= edge_serial->serial->num_ports)
@@ -1793,10 +1798,17 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 	}
 
 	if (code == IOSP_STATUS_OPEN_RSP) {
+		spin_lock_irqsave(&edge_port->ep_lock, flags);
+		/* reject stray open responses to avoid FIFO corruption */
+		if (edge_port->maxTxCredits != 0) {
+			spin_unlock_irqrestore(&edge_port->ep_lock, flags);
+			return;
+		}
 		edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
 		edge_port->maxTxCredits = edge_port->txCredits;
 		dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n",
 			__func__, edge_serial->rxPort, byte2, edge_port->txCredits);
+		spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 		handle_new_msr(edge_port, byte2);
 
 		/* send the current line settings to the port so we are
-- 
2.55.0