[PATCH 05/11] USB: serial: io_edgeport: serialise MCR accesses

[Johan Hovold <johan@kernel.org>]

Add a mutex to serialise modem control register updates to prevent
concurrent tasks from interfering with each other.

Note that the register updates are currently asynchronous so a task may
read back a value which has not yet taken effect.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/io_edgeport.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 38f58ca115eb..0b50c6b99b0a 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -168,6 +168,7 @@ struct edgeport_port {
 	struct urb		*write_urb;		/* write URB for this port */
 	bool			write_in_progress;	/* 'true' while a write URB is outstanding */
 	spinlock_t		ep_lock;
+	struct mutex		mutex;
 
 	__u8			shadowLCR;		/* last LCR value received */
 	__u8			shadowMCR;		/* last MCR value received */
@@ -884,7 +885,10 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	spin_unlock_irq(&edge_port->ep_lock);
 
 	/* Must always set this bit to enable ints! */
+	mutex_lock(&edge_port->mutex);
 	edge_port->shadowMCR = MCR_MASTER_IE;
+	mutex_unlock(&edge_port->mutex);
+
 	edge_port->chaseResponsePending = false;
 
 	/* send a open port command */
@@ -1397,9 +1401,11 @@ static void edge_throttle(struct tty_struct *tty)
 
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (C_CRTSCTS(tty)) {
+		mutex_lock(&edge_port->mutex);
 		edge_port->shadowMCR &= ~MCR_RTS;
 		status = send_cmd_write_uart_register(edge_port, MCR,
 							edge_port->shadowMCR);
+		mutex_unlock(&edge_port->mutex);
 		if (status != 0)
 			return;
 	}
@@ -1434,9 +1440,11 @@ static void edge_unthrottle(struct tty_struct *tty)
 	}
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (C_CRTSCTS(tty)) {
+		mutex_lock(&edge_port->mutex);
 		edge_port->shadowMCR |= MCR_RTS;
 		send_cmd_write_uart_register(edge_port, MCR,
 						edge_port->shadowMCR);
+		mutex_unlock(&edge_port->mutex);
 	}
 }
 
@@ -1501,6 +1509,7 @@ static int edge_tiocmset(struct tty_struct *tty,
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int mcr;
 
+	mutex_lock(&edge_port->mutex);
 	mcr = edge_port->shadowMCR;
 	if (set & TIOCM_RTS)
 		mcr |= MCR_RTS;
@@ -1519,6 +1528,7 @@ static int edge_tiocmset(struct tty_struct *tty,
 	edge_port->shadowMCR = mcr;
 
 	send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
+	mutex_unlock(&edge_port->mutex);
 
 	return 0;
 }
@@ -1532,6 +1542,7 @@ static int edge_tiocmget(struct tty_struct *tty)
 	unsigned int mcr;
 
 	msr = edge_port->shadowMSR;
+	mutex_lock(&edge_port->mutex);
 	mcr = edge_port->shadowMCR;
 	result = ((mcr & MCR_DTR)	? TIOCM_DTR: 0)	  /* 0x002 */
 		  | ((mcr & MCR_RTS)	? TIOCM_RTS: 0)   /* 0x004 */
@@ -1539,6 +1550,7 @@ static int edge_tiocmget(struct tty_struct *tty)
 		  | ((msr & EDGEPORT_MSR_CD)	? TIOCM_CAR: 0)   /* 0x040 */
 		  | ((msr & EDGEPORT_MSR_RI)	? TIOCM_RI:  0)   /* 0x080 */
 		  | ((msr & EDGEPORT_MSR_DSR)	? TIOCM_DSR: 0);  /* 0x100 */
+	mutex_unlock(&edge_port->mutex);
 
 	return result;
 }
@@ -2477,12 +2489,14 @@ static void change_port_settings(struct tty_struct *tty,
 		return;
 
 	/* set up the MCR register and send it to the EdgePort */
+	mutex_lock(&edge_port->mutex);
 	edge_port->shadowMCR = MCR_MASTER_IE;
 	if (cflag & CBAUD)
 		edge_port->shadowMCR |= (MCR_DTR | MCR_RTS);
 
 	status = send_cmd_write_uart_register(edge_port, MCR,
 						edge_port->shadowMCR);
+	mutex_unlock(&edge_port->mutex);
 	if (status != 0)
 		return;
 
@@ -2974,6 +2988,7 @@ static int edge_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&edge_port->ep_lock);
+	mutex_init(&edge_port->mutex);
 
 	init_waitqueue_head(&edge_port->wait_open);
 	init_waitqueue_head(&edge_port->wait_chase);
-- 
2.55.0