[PATCH v2 0/1] Enable eeprom tlv command for SpacemiT K3 in main app

[PATCH v2 0/1] Enable eeprom tlv command for SpacemiT K3 in main app

[E Shattow]

A few commits that have the required eeprom nodes landed recently with
the import of Linux v7.3 devicetree-rebasing to U-Boot dts subtree, so
let's enable the eeprom tlv command in SpacemiT K3 config. There's not
any SPL in-tree so don't worry yet about implementing such hooks or
config options.

Changes since v1:

- Drop cherry-picked dts subtree patches 1,2,3 now redundant 
- Patch 4 => 1 and apply tags

E Shattow (1):
  configs: spacemit: k3: enable eeprom tlv command in main app

 configs/spacemit_k3_defconfig | 2 ++
 1 file changed, 2 insertions(+)


base-commit: 62c9805d8d57cad407f0295879cc9a6182da464a
-- 
2.53.0

[PATCH v2 1/1] configs: spacemit: k3: enable eeprom tlv command in main app

[E Shattow]

Enable "tlv" command. SPL is not yet upstream so this is only in the main
app.

Signed-off-by: E Shattow <e@freeshell.de>
Tested-by: E Shattow <e@freeshell.de>
Reviewed-by: Yixun Lan <dlan@kernel.org>
---
 configs/spacemit_k3_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/spacemit_k3_defconfig b/configs/spacemit_k3_defconfig
index 586305c62322..66d1a36c79c3 100644
--- a/configs/spacemit_k3_defconfig
+++ b/configs/spacemit_k3_defconfig
@@ -22,6 +22,7 @@ CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=276
 # CONFIG_BOARD_INIT is not set
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_TLV_EEPROM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_DHCP=y
@@ -44,6 +45,7 @@ CONFIG_SPACEMIT_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_SPACEMIT_K1=y
 CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
 CONFIG_PHY_GIGE=y
 CONFIG_DWC_ETH_QOS=y
 CONFIG_DWC_ETH_QOS_SPACEMIT=y
-- 
2.53.0

Re: [PATCH v2 0/1] Enable eeprom tlv command for SpacemiT K3 in main app

[Yixun Lan]

On Wed, 21 Oct 2026 08:42:14 -0700, E Shattow wrote:
> A few commits that have the required eeprom nodes landed recently with
> the import of Linux v7.3 devicetree-rebasing to U-Boot dts subtree, so
> let's enable the eeprom tlv command in SpacemiT K3 config. There's not
> any SPL in-tree so don't worry yet about implementing such hooks or
> config options.
> 
> Changes since v1:
> 
> [...]

Applied, thanks!

[1/1] configs: spacemit: k3: enable eeprom tlv command in main app
      https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/2d79480aad04cb36043963cb4be1caab2fe35da3

Best regards,
-- 
Yixun Lan <dlan@kernel.org>