[PATCH v2 0/2] Enable SPI NOR flash for SpacemiT K3 in main app

[PATCH v2 0/2] Enable SPI NOR flash for SpacemiT K3 in main app

[E Shattow]

Enable SPI Flash command, mtd part names and locations, and store U-Boot
environment in SPI NOR flash. Selected for Winbond and GigaDevice parts.

Changes since v1:
- relocate imply SPI in SoC base config to enabled in board config
- enable GigaDevice SPI NOR flash used by board variant K3 CoM260
- relax commit messages to describe more than specific K3 Pico-ITX board
- drop advice from commit message of dependency on vendor SPL
- keep simple "spi0.0" mtdparts layout name pending some way to automate

E Shattow (2):
  configs: spacemit: k3: enable spi nor flash in main app
  configs: spacemit: k3: enable mtdparts in main app

 configs/spacemit_k3_defconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)


base-commit: 62c9805d8d57cad407f0295879cc9a6182da464a
-- 
2.53.0

[PATCH v2 1/2] configs: spacemit: k3: enable spi nor flash in main app

[E Shattow]

Enable sf command and env storage in SPI NOR flash. SPL is not yet
upstream so this is only in the main app.

Signed-off-by: E Shattow <e@freeshell.de>
---
 configs/spacemit_k3_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/configs/spacemit_k3_defconfig b/configs/spacemit_k3_defconfig
index 586305c62322..afe3a3b42939 100644
--- a/configs/spacemit_k3_defconfig
+++ b/configs/spacemit_k3_defconfig
@@ -4,6 +4,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x80000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x102300000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0xa0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="spacemit/k3-pico-itx"
 CONFIG_SYS_BOOTM_LEN=0xa000000
@@ -35,6 +37,8 @@ CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_DEVICE_TREE_INCLUDES="spacemit-k3-u-boot.dtsi"
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_NET_LWIP=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SYSCON=y
@@ -44,6 +48,8 @@ CONFIG_SPACEMIT_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_SPACEMIT_K1=y
 CONFIG_MISC=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_GIGE=y
 CONFIG_DWC_ETH_QOS=y
 CONFIG_DWC_ETH_QOS_SPACEMIT=y
@@ -61,4 +67,6 @@ CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_SYS_NS16550=y
 CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SPI=y
+CONFIG_FSL_QSPI=y
 CONFIG_TIMER_EARLY=y
-- 
2.53.0

[PATCH v2 2/2] configs: spacemit: k3: enable mtdparts in main app

[E Shattow]

add default mtdparts and mtdids consistent with k3-pico-itx.dts

Signed-off-by: E Shattow <e@freeshell.de>
---
 configs/spacemit_k3_defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/configs/spacemit_k3_defconfig b/configs/spacemit_k3_defconfig
index afe3a3b42939..2be660820ab8 100644
--- a/configs/spacemit_k3_defconfig
+++ b/configs/spacemit_k3_defconfig
@@ -26,6 +26,7 @@ CONFIG_SYS_PBSIZE=276
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
+CONFIG_CMD_MTD=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_DNS=y
 CONFIG_CMD_MII=y
@@ -36,6 +37,9 @@ CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=spi0.0"
+CONFIG_MTDPARTS_DEFAULT="spi0.0:128k(bootinfo),512k(fsbl),64k(env),1024k(esos),384k(opensbi),-(uboot)"
 CONFIG_DEVICE_TREE_INCLUDES="spacemit-k3-u-boot.dtsi"
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
@@ -50,6 +54,7 @@ CONFIG_SYS_I2C_SPACEMIT_K1=y
 CONFIG_MISC=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_GIGE=y
 CONFIG_DWC_ETH_QOS=y
 CONFIG_DWC_ETH_QOS_SPACEMIT=y
-- 
2.53.0