From: Jesper X Nilsson <jesper.x.nilsson@axis.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Stefan Windfeldt-Prytz" <stefan.windfeldt-prytz@axis.com>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Jesper X Nilsson <jesper.x.nilsson@axis.com>, <kernel@axis.com>
Subject: [PATCH 2/3] iio: light: opt4001: refactor driver to prepare to support more devices
Date: Fri, 23 Oct 2026 09:48:14 +0200 [thread overview]
Message-ID: <20261023-opt4041-v1-2-45227f82d05c@axis.com> (raw)
In-Reply-To: <20261023-opt4041-v1-0-45227f82d05c@axis.com>
Prepare opt4001 driver to be able to support OPT4041. Extend struct
opt4001_chip_info with fields channels and device_id because OPT4041 has
two channels and another device id.
Datasheet: https://www.ti.com/lit/gpn/opt4041
Assisted-by: LLM
Signed-off-by: Jesper X Nilsson <jesper.x.nilsson@axis.com>
---
drivers/iio/light/opt4001.c | 77 +++++++++++++++++++++++++++++----------------
1 file changed, 50 insertions(+), 27 deletions(-)
diff --git a/drivers/iio/light/opt4001.c b/drivers/iio/light/opt4001.c
index aa3d87995b7c..bf5dc1c8514c 100644
--- a/drivers/iio/light/opt4001.c
+++ b/drivers/iio/light/opt4001.c
@@ -78,6 +78,9 @@ struct opt4001_chip_info {
int mul;
int div;
const char *name;
+ const struct iio_chan_spec *channels;
+ int num_channels;
+ u16 device_id;
};
struct opt4001_chip {
@@ -87,16 +90,32 @@ struct opt4001_chip {
const struct opt4001_chip_info *chip_info;
};
+static const struct iio_chan_spec opt4001_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .address = OPT4001_LIGHT1_MSB,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME)
+ },
+};
+
static const struct opt4001_chip_info opt4001_sot_5x3_info = {
.mul = 4375,
.div = 10000000,
- .name = "opt4001-sot-5x3"
+ .name = "opt4001-sot-5x3",
+ .channels = opt4001_channels,
+ .num_channels = ARRAY_SIZE(opt4001_channels),
+ .device_id = OPT4001_DEVICE_ID_VAL,
};
static const struct opt4001_chip_info opt4001_picostar_info = {
.mul = 3125,
.div = 10000000,
- .name = "opt4001-picostar"
+ .name = "opt4001-picostar",
+ .channels = opt4001_channels,
+ .num_channels = ARRAY_SIZE(opt4001_channels),
+ .device_id = OPT4001_DEVICE_ID_VAL,
};
static const int opt4001_int_time_available[][2] = {
@@ -159,10 +178,9 @@ static u8 opt4001_calculate_crc(u8 exp, u32 mantissa, u8 count)
return crc;
}
-static int opt4001_read_lux_value(struct iio_dev *indio_dev,
- int *val, int *val2)
+static int opt4001_read_raw_value(struct opt4001_chip *chip, unsigned int reg,
+ u64 *raw_value)
{
- struct opt4001_chip *chip = iio_priv(indio_dev);
struct device *dev = &chip->client->dev;
unsigned int light1;
unsigned int light2;
@@ -172,17 +190,16 @@ static int opt4001_read_lux_value(struct iio_dev *indio_dev,
u8 count;
u8 crc;
u8 calc_crc;
- u64 lux_raw;
- u32 rem;
+ u32 mantissa;
int ret;
- ret = regmap_read(chip->regmap, OPT4001_LIGHT1_MSB, &light1);
+ ret = regmap_read(chip->regmap, reg, &light1);
if (ret < 0) {
dev_err(dev, "Failed to read data bytes");
return ret;
}
- ret = regmap_read(chip->regmap, OPT4001_LIGHT1_LSB, &light2);
+ ret = regmap_read(chip->regmap, reg + 1, &light2);
if (ret < 0) {
dev_err(dev, "Failed to read data bytes");
return ret;
@@ -193,12 +210,27 @@ static int opt4001_read_lux_value(struct iio_dev *indio_dev,
crc = FIELD_GET(OPT4001_CRC_MASK, light2);
msb = FIELD_GET(OPT4001_MSB_MASK, light1);
lsb = FIELD_GET(OPT4001_LSB_MASK, light2);
- lux_raw = (msb << 8) + lsb;
- calc_crc = opt4001_calculate_crc(exp, lux_raw, count);
+ mantissa = (msb << 8) + lsb;
+ calc_crc = opt4001_calculate_crc(exp, mantissa, count);
if (calc_crc != crc)
return -EIO;
- lux_raw = lux_raw << exp;
+ *raw_value = (u64)mantissa << exp;
+
+ return 0;
+}
+
+static int opt4001_read_lux_value(struct opt4001_chip *chip, unsigned int reg,
+ int *val, int *val2)
+{
+ u64 lux_raw;
+ u32 rem;
+ int ret;
+
+ ret = opt4001_read_raw_value(chip, reg, &lux_raw);
+ if (ret)
+ return ret;
+
lux_raw = lux_raw * chip->chip_info->mul;
*val = div_u64_rem(lux_raw, chip->chip_info->div, &rem);
*val2 = rem * 100;
@@ -233,15 +265,6 @@ static void opt4001_chip_off_action(void *data)
dev_err(&chip->client->dev, "Failed to power down\n");
}
-static const struct iio_chan_spec opt4001_channels[] = {
- {
- .type = IIO_LIGHT,
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
- .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME),
- .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME)
- },
-};
-
static int opt4001_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
@@ -250,7 +273,7 @@ static int opt4001_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_PROCESSED:
- return opt4001_read_lux_value(indio_dev, val, val2);
+ return opt4001_read_lux_value(chip, chan->address, val, val2);
case IIO_CHAN_INFO_INT_TIME:
*val = 0;
*val2 = opt4001_int_time_reg[chip->int_time][0];
@@ -388,19 +411,19 @@ static int opt4001_probe(struct i2c_client *client)
return dev_err_probe(&client->dev, ret,
"failed to reinit regmap cache\n");
+ chip->chip_info = i2c_get_match_data(client);
+
ret = regmap_read(chip->regmap, OPT4001_DEVICE_ID, &dev_id);
if (ret < 0)
return dev_err_probe(&client->dev, ret,
"Failed to read the device ID register\n");
dev_id = FIELD_GET(OPT4001_DEVICE_ID_MASK, dev_id);
- if (dev_id != OPT4001_DEVICE_ID_VAL)
+ if (dev_id != chip->chip_info->device_id)
dev_warn(&client->dev, "Device ID: %#04x unknown\n", dev_id);
- chip->chip_info = i2c_get_match_data(client);
-
- indio_dev->channels = opt4001_channels;
- indio_dev->num_channels = ARRAY_SIZE(opt4001_channels);
+ indio_dev->channels = chip->chip_info->channels;
+ indio_dev->num_channels = chip->chip_info->num_channels;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->name = chip->chip_info->name;
--
2.43.0
next prev parent reply other threads:[~2026-10-23 7:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-23 7:48 [PATCH 0/3] This series adds support for Texas Instruments OPT4041 Ambient light sensor Jesper X Nilsson
2026-10-23 7:48 ` [PATCH 1/3] dt-bindings: iio: light: opt4001: add opt4041 Jesper X Nilsson
2026-10-23 7:48 ` Jesper X Nilsson [this message]
2026-10-23 9:07 ` [PATCH 2/3] iio: light: opt4001: refactor driver to prepare to support more devices Andy Shevchenko
2026-10-23 10:07 ` Jesper X Nilsson
2026-10-23 20:51 ` Jonathan Cameron
2026-10-23 9:10 ` Joshua Crofts
2026-10-23 9:16 ` Joshua Crofts
2026-10-23 10:22 ` Jesper X Nilsson
2026-10-23 7:48 ` [PATCH 3/3] iio: light: opt4001: add support for opt4041 Jesper X Nilsson
2026-10-23 9:14 ` Andy Shevchenko
2026-10-23 10:19 ` Jesper X Nilsson
2026-10-23 9:17 ` [PATCH 0/3] This series adds support for Texas Instruments OPT4041 Ambient light sensor Andy Shevchenko
2026-10-23 10:20 ` Jesper X Nilsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261023-opt4041-v1-2-45227f82d05c@axis.com \
--to=jesper.x.nilsson@axis.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=kernel@axis.com \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=stefan.windfeldt-prytz@axis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.