[GIT PULL] Please pull U-Boot spacemit-main-20261023

[GIT PULL] Please pull U-Boot spacemit-main-20261023

[Yixun Lan]

Hi Tom,

Please pull from u-boot-spacemit into main, thanks.

CI for this pull request is available here:
  https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/pipelines/1695


The following changes since commit acc808479730e13e74199119eb9b2b9113999244:

  Merge tag 'net-20261022' of https://git.u-boot-project.org/u-boot/custodians/u-boot-net (2026-10-22 09:22:17 -0600)

are available in the Git repository at:

  https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit tags/spacemit-main-20261023

for you to fetch changes up to 53d5fc5d42bf31d3e627bea34a5199d7790d9f43:

  spacemit: k1: fall back to the other boot devices in SPL (2026-10-22 22:57:40 +0000)

----------------------------------------------------------------
Pull request spacemit-main-20261023.

K1 SoC:
- No panic without PMIC or SPI
- Fallback other boot devices
- Enable USB host

K3 SoC:
- Enable EEPROM
- Enable SPI NOR flash
- Boot image support

----------------------------------------------------------------
Dave Klotz (5):
      phy: spacemit: add K1 USB 2.0 PHY driver
      usb: dwc3: generic: add SpacemiT K1 and K3 support
      configs: spacemit_k1: enable USB host
      spacemit: k1: do not require a PMIC or an SPI controller in SPL
      spacemit: k1: fall back to the other boot devices in SPL

E Shattow (3):
      configs: spacemit: k3: enable spi nor flash in main app
      configs: spacemit: k3: enable mtdparts in main app
      configs: spacemit: k3: enable eeprom tlv command in main app

Junhui Liu (2):
      tools: mkimage: add SpacemiT K3 boot image support
      doc: board: spacemit: document the SpacemiT boot image format

 MAINTAINERS                        |   1 +
 board/spacemit/k1/spl.c            |  48 ++++++++-
 boot/image.c                       |   1 +
 configs/spacemit_k1_defconfig      |   8 ++
 configs/spacemit_k3_defconfig      |  15 +++
 doc/board/spacemit/index.rst       |   1 +
 doc/board/spacemit/smtimage.rst    | 144 +++++++++++++++++++++++++
 drivers/phy/spacemit/Kconfig       |  10 ++
 drivers/phy/spacemit/Makefile      |   1 +
 drivers/phy/spacemit/phy-k1-usb2.c | 153 +++++++++++++++++++++++++++
 drivers/usb/dwc3/dwc3-generic.c    |   2 +
 include/image.h                    |   1 +
 tools/Makefile                     |   1 +
 tools/smtimage.c                   | 208 +++++++++++++++++++++++++++++++++++++
 14 files changed, 590 insertions(+), 4 deletions(-)
 create mode 100644 doc/board/spacemit/smtimage.rst
 create mode 100644 drivers/phy/spacemit/phy-k1-usb2.c
 create mode 100644 tools/smtimage.c

-- 
Yixun Lan (dlan)

Re: [GIT PULL] Please pull U-Boot spacemit-main-20261023

[Tom Rini]

On Fri, 23 Oct 2026 06:37:27 +0000, Yixun Lan wrote:

> Please pull from u-boot-spacemit into main, thanks.
> 
> CI for this pull request is available here:
>   https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/pipelines/1695
> 
> 
> The following changes since commit acc808479730e13e74199119eb9b2b9113999244:
> 
> [...]

Merged into u-boot/main, thanks!

-- 
Tom