All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vladimir Zapolskiy <vz@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Abel Vesa <abelvesa@kernel.org>,
	Bryan O'Donoghue <bod@kernel.org>, Vinod Koul <vkoul@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
	Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
	Loic Poulain <loic.poulain@oss.qualcomm.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	linux-phy@lists.infradead.org, Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org,
	Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH v2 7/7] arm64: dts: qcom: sm8450: Add description of pins with MCLK function
Date: Tue, 27 Oct 2026 00:49:57 +0200	[thread overview]
Message-ID: <20261026224957.1115370-8-vz@kernel.org> (raw)
In-Reply-To: <20261026224957.1115370-1-vz@kernel.org>

Qualcomm SM8450 SoC provides up to 8 MCLK signals on GPIOs 100 to 107,
add the correspondent default and sleep pin configurations.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Vladimir Zapolskiy <vz@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 112 +++++++++++++++++++++++++++
 1 file changed, 112 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index b4f7672cec94..c8e9af8eb66d 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4292,6 +4292,118 @@ data-pins {
 				};
 			};
 
+			cam0_default: cam0-default-state {
+				pins = "gpio100";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam0_sleep: cam0-sleep-state {
+				pins = "gpio100";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam1_default: cam1-default-state {
+				pins = "gpio101";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam1_sleep: cam1-sleep-state {
+				pins = "gpio101";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam2_default: cam2-default-state {
+				pins = "gpio102";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam2_sleep: cam2-sleep-state {
+				pins = "gpio102";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam3_default: cam3-default-state {
+				pins = "gpio103";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam3_sleep: cam3-sleep-state {
+				pins = "gpio103";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam4_default: cam4-default-state {
+				pins = "gpio104";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam4_sleep: cam4-sleep-state {
+				pins = "gpio104";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam5_default: cam5-default-state {
+				pins = "gpio105";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam5_sleep: cam5-sleep-state {
+				pins = "gpio105";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam6_default: cam6-default-state {
+				pins = "gpio106";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam6_sleep: cam6-sleep-state {
+				pins = "gpio106";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam7_default: cam7-default-state {
+				pins = "gpio107";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam7_sleep: cam7-sleep-state {
+				pins = "gpio107";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			cci0_default: cci0-default-state {
 				/* SDA, SCL */
 				pins = "gpio110", "gpio111";
-- 
2.51.0


WARNING: multiple messages have this Message-ID (diff)
From: Vladimir Zapolskiy <vz@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Abel Vesa <abelvesa@kernel.org>,
	Bryan O'Donoghue <bod@kernel.org>, Vinod Koul <vkoul@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
	Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
	Loic Poulain <loic.poulain@oss.qualcomm.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	linux-phy@lists.infradead.org, Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org,
	Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH v2 7/7] arm64: dts: qcom: sm8450: Add description of pins with MCLK function
Date: Tue, 27 Oct 2026 00:49:57 +0200	[thread overview]
Message-ID: <20261026224957.1115370-8-vz@kernel.org> (raw)
In-Reply-To: <20261026224957.1115370-1-vz@kernel.org>

Qualcomm SM8450 SoC provides up to 8 MCLK signals on GPIOs 100 to 107,
add the correspondent default and sleep pin configurations.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Vladimir Zapolskiy <vz@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 112 +++++++++++++++++++++++++++
 1 file changed, 112 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index b4f7672cec94..c8e9af8eb66d 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4292,6 +4292,118 @@ data-pins {
 				};
 			};
 
+			cam0_default: cam0-default-state {
+				pins = "gpio100";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam0_sleep: cam0-sleep-state {
+				pins = "gpio100";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam1_default: cam1-default-state {
+				pins = "gpio101";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam1_sleep: cam1-sleep-state {
+				pins = "gpio101";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam2_default: cam2-default-state {
+				pins = "gpio102";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam2_sleep: cam2-sleep-state {
+				pins = "gpio102";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam3_default: cam3-default-state {
+				pins = "gpio103";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam3_sleep: cam3-sleep-state {
+				pins = "gpio103";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam4_default: cam4-default-state {
+				pins = "gpio104";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam4_sleep: cam4-sleep-state {
+				pins = "gpio104";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam5_default: cam5-default-state {
+				pins = "gpio105";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam5_sleep: cam5-sleep-state {
+				pins = "gpio105";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam6_default: cam6-default-state {
+				pins = "gpio106";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam6_sleep: cam6-sleep-state {
+				pins = "gpio106";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam7_default: cam7-default-state {
+				pins = "gpio107";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam7_sleep: cam7-sleep-state {
+				pins = "gpio107";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			cci0_default: cci0-default-state {
 				/* SDA, SCL */
 				pins = "gpio110", "gpio111";
-- 
2.51.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2026-10-26 22:50 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-26 22:49 [PATCH v2 0/7] media: qcom: camss: Add SM8450 CAMSS support Vladimir Zapolskiy
2026-10-26 22:49 ` Vladimir Zapolskiy
2026-10-26 22:49 ` [PATCH v2 1/7] dt-bindings: phy: qcom,x1e80100-csi2-phy: Add SM8450 compatible Vladimir Zapolskiy
2026-10-26 22:49   ` Vladimir Zapolskiy
2026-10-28 12:09   ` Krzysztof Kozlowski
2026-10-28 12:09     ` Krzysztof Kozlowski
2026-10-26 22:49 ` [PATCH v2 2/7] dt-bindings: media: Add Qualcomm SM8450 CAMSS Vladimir Zapolskiy
2026-10-26 22:49   ` Vladimir Zapolskiy
2026-10-28 12:16   ` Krzysztof Kozlowski
2026-10-28 12:16     ` Krzysztof Kozlowski
2026-10-26 22:49 ` [PATCH v2 3/7] media: qcom: camss: Allow CSI2 PHY devices without CSIPHY resources Vladimir Zapolskiy
2026-10-26 22:49   ` Vladimir Zapolskiy
2026-10-27 10:52   ` Loic Poulain
2026-10-27 10:52     ` Loic Poulain
2026-10-27 17:00     ` Vladimir Zapolskiy
2026-10-27 17:00       ` Vladimir Zapolskiy
2026-10-28 14:43   ` Loic Poulain
2026-10-28 14:43     ` Loic Poulain
2026-10-28 15:22   ` Frank Li
2026-10-28 15:22     ` Frank Li
2026-10-26 22:49 ` [PATCH v2 4/7] media: qcom: camss: Add SM8450 CAMSS support Vladimir Zapolskiy
2026-10-26 22:49   ` Vladimir Zapolskiy
2026-10-28 15:31   ` Frank Li
2026-10-28 15:31     ` Frank Li
2026-10-26 22:49 ` [PATCH v2 5/7] arm64: dts: qcom: sm8450: Add CSI2 PHY device tree nodes Vladimir Zapolskiy
2026-10-26 22:49   ` Vladimir Zapolskiy
2026-10-27 11:11   ` Abel Vesa
2026-10-27 11:11     ` Abel Vesa
2026-10-26 22:49 ` [PATCH v2 6/7] arm64: dts: qcom: sm8450: Add CAMSS device tree node Vladimir Zapolskiy
2026-10-26 22:49   ` Vladimir Zapolskiy
2026-10-27 11:11   ` Abel Vesa
2026-10-27 11:11     ` Abel Vesa
2026-10-26 22:49 ` Vladimir Zapolskiy [this message]
2026-10-26 22:49   ` [PATCH v2 7/7] arm64: dts: qcom: sm8450: Add description of pins with MCLK function Vladimir Zapolskiy
2026-10-27 11:12   ` Abel Vesa
2026-10-27 11:12     ` Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261026224957.1115370-8-vz@kernel.org \
    --to=vz@kernel.org \
    --cc=abelvesa@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bod@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@oss.qualcomm.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=loic.poulain@oss.qualcomm.com \
    --cc=mani@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    --cc=vladimir.zapolskiy@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.