All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
	heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
	robh@kernel.org, sre@kernel.org, t.schramm@manjaro.org,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH 1/3] dt-bindings: power: cw2015: add cw2215, cw2217, and cw2218
Date: Tue, 27 Oct 2026 08:17:49 -0500	[thread overview]
Message-ID: <20261027131751.1724448-2-macroalpha82@gmail.com> (raw)
In-Reply-To: <20261027131751.1724448-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Add bindings for the Cellwise cw2215/cw2217/cw2218 i2C interface
battery gauge. It is similar in function to the existing cw2015 but
with a different register layout. Each of the cw2215, cw2217 and cw2218
only really differ in the minor specs and the hardware ID they display
when queried. shunt-resistor-micro-ohms is a property in use for
multiple devices so not appending a vendor prefix to it.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../bindings/power/supply/cw2015_battery.yaml | 42 +++++++++++++++----
 1 file changed, 35 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
index f7bde324153d..12d2d9a9cf6f 100644
--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -14,12 +14,13 @@ description: |
   phandle in monitored-battery. If specified the driver uses the
   charge-full-design-microamp-hours property of the battery.
 
-allOf:
-  - $ref: power-supply.yaml#
-
 properties:
   compatible:
-    const: cellwise,cw2015
+    enum:
+      - cellwise,cw2015
+      - cellwise,cw2215
+      - cellwise,cw2217
+      - cellwise,cw2218
 
   reg:
     maxItems: 1
@@ -31,8 +32,6 @@ properties:
       it is to mail two batteries to a test facility of CellWise and receive
       back a test report with the binary blob.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    minItems: 64
-    maxItems: 64
 
   cellwise,monitor-interval-ms:
     description:
@@ -41,7 +40,14 @@ properties:
 
   power-supplies:
     minItems: 1
-    maxItems: 8 # Should be enough
+    maxItems: 8  # Should be enough
+
+  shunt-resistor-micro-ohms:
+    description: |
+      The value, in micro-ohms, of the shunt resistor used for sampling
+      the battery current.
+    minimum: 1000000
+    maximum: 50000000
 
   monitored-battery: true
 
@@ -49,6 +55,28 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: power-supply.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cellwise,cw2015
+    then:
+      properties:
+        shunt-resistor-micro-ohms: false
+
+        cellwise,battery-profile:
+          minItems: 64
+          maxItems: 64
+
+    else:
+      properties:
+        cellwise,battery-profile:
+          minItems: 80
+          maxItems: 80
+
 additionalProperties: false
 
 examples:
-- 
2.53.0


WARNING: multiple messages have this Message-ID (diff)
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
	heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
	robh@kernel.org, sre@kernel.org, t.schramm@manjaro.org,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH 1/3] dt-bindings: power: cw2015: add cw2215, cw2217, and cw2218
Date: Tue, 27 Oct 2026 08:17:49 -0500	[thread overview]
Message-ID: <20261027131751.1724448-2-macroalpha82@gmail.com> (raw)
In-Reply-To: <20261027131751.1724448-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Add bindings for the Cellwise cw2215/cw2217/cw2218 i2C interface
battery gauge. It is similar in function to the existing cw2015 but
with a different register layout. Each of the cw2215, cw2217 and cw2218
only really differ in the minor specs and the hardware ID they display
when queried. shunt-resistor-micro-ohms is a property in use for
multiple devices so not appending a vendor prefix to it.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../bindings/power/supply/cw2015_battery.yaml | 42 +++++++++++++++----
 1 file changed, 35 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
index f7bde324153d..12d2d9a9cf6f 100644
--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -14,12 +14,13 @@ description: |
   phandle in monitored-battery. If specified the driver uses the
   charge-full-design-microamp-hours property of the battery.
 
-allOf:
-  - $ref: power-supply.yaml#
-
 properties:
   compatible:
-    const: cellwise,cw2015
+    enum:
+      - cellwise,cw2015
+      - cellwise,cw2215
+      - cellwise,cw2217
+      - cellwise,cw2218
 
   reg:
     maxItems: 1
@@ -31,8 +32,6 @@ properties:
       it is to mail two batteries to a test facility of CellWise and receive
       back a test report with the binary blob.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    minItems: 64
-    maxItems: 64
 
   cellwise,monitor-interval-ms:
     description:
@@ -41,7 +40,14 @@ properties:
 
   power-supplies:
     minItems: 1
-    maxItems: 8 # Should be enough
+    maxItems: 8  # Should be enough
+
+  shunt-resistor-micro-ohms:
+    description: |
+      The value, in micro-ohms, of the shunt resistor used for sampling
+      the battery current.
+    minimum: 1000000
+    maximum: 50000000
 
   monitored-battery: true
 
@@ -49,6 +55,28 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: power-supply.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cellwise,cw2015
+    then:
+      properties:
+        shunt-resistor-micro-ohms: false
+
+        cellwise,battery-profile:
+          minItems: 64
+          maxItems: 64
+
+    else:
+      properties:
+        cellwise,battery-profile:
+          minItems: 80
+          maxItems: 80
+
 additionalProperties: false
 
 examples:
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  reply	other threads:[~2026-10-27 13:17 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-27 13:17 [PATCH 0/3] Add Cellwise CW2217 Chris Morgan
2026-10-27 13:17 ` Chris Morgan
2026-10-27 13:17 ` Chris Morgan [this message]
2026-10-27 13:17   ` [PATCH 1/3] dt-bindings: power: cw2015: add cw2215, cw2217, and cw2218 Chris Morgan
2026-10-27 13:22   ` sashiko-bot
2026-10-27 15:57   ` Krzysztof Kozlowski
2026-10-27 15:57     ` Krzysztof Kozlowski
2026-10-27 13:17 ` [PATCH 2/3] power: supply: cw2217: Add support for Cellwise cw2217 Chris Morgan
2026-10-27 13:17   ` Chris Morgan
2026-10-27 13:31   ` sashiko-bot
2026-10-27 13:34   ` Shawn Lin
2026-10-27 13:34     ` Shawn Lin
2026-10-27 15:46     ` Chris Morgan
2026-10-27 15:46       ` Chris Morgan
2026-10-29  6:24   ` kernel test robot
2026-10-29  6:24     ` kernel test robot
2026-10-27 13:17 ` [PATCH 3/3] arm64: dts: rockchip: Add Battery Gauge to Anbernic Vita-Pro Chris Morgan
2026-10-27 13:17   ` Chris Morgan
2026-10-27 13:32   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261027131751.1724448-2-macroalpha82@gmail.com \
    --to=macroalpha82@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=macromorgan@hotmail.com \
    --cc=robh@kernel.org \
    --cc=sre@kernel.org \
    --cc=t.schramm@manjaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.